Featured Products
Dip-soldered connection, angled at 90°, with guide frame, riveting nut Sub-D connector Erni Laminated ground cont...
Dip-soldered connection, angled at 90°, with guide frame, riveting nut Sub-D connector Erni Laminated ground cont...
TMC Crimp Snap-In Installation in KSG 183, 184 und 185 possible Individual contact assignment, thus also partial as...
Quick Lock D-Sub Metalized Plastic Hoods - Provertha The Provertha Quick Lock range of D-Sub metalized plastic hoods offers a Push_Pull locking...
Dip-soldered connection, angled at 90°, with guide frame, standard Sub-D connector Erni Laminated ground contact...
ERNI SlimLine Right Angled Female Connectors A range of slim-line through hole D-sub connectors from ERNI Electroni...
Profibus D Sub External Cable Clamp These I-Net Profibus bus connectors with external cable clamp are suitable for large cables 4-14 mm diameter...
Dip-soldered connection, straight, riveting nut and sleeve Sub-D connector Erni Laminated ground contact on the m...
TMC Crimp Snap-In Installation in KSG 183, 184 und 185 possible Individual contact assignment, thus also partial as...
Popular Categories For Provertha
Popular Items
Popular items
023183, Provertha
Dip-soldered connection, angled at 90°, with guide frame, riveting nut
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
Popular items
40-1392142, Provertha
Profibus D Sub External Cable Clamp
These I-Net Profibus bus connectors with external cable clamp are suitable for large cables 4-14 mm diameter. There are four types of body configuration of the external cable clamp I-Net Profibus bus connectors: Standard, Compact, Axial and Special with Body Orientations of 90°, 90°, 180° and 55° respectively. The I-Net Profibus bus connectors are available in two versions, namely, Standard with one male 'D' port connector and PG with two, male and female, 'D' port connectors for monitoring, see table.
External Cable Clamp Stock Number Reference
Type / Version
Standard (1 'D' Port)
PG (2 'D' Ports)
Standard
729-6481
729-6491
Compact
729-6497
729-6504
Axial
729-6485
n/a
Special
729-6494
729-6501
I-Net Profibus Bus Connectors - Provertha
The Provertha I-Net Profibus 'D' bus connectors range feature Plug&Play M12 connectors as well as field assembly internal and external cable clamping versions. These I-Net Profibus connectors provide function and security for upto 40 Profibus participants at speeds of 12 Mbits/s. Configured for Profibus DP these I-Net Profibus connectors prevent signal reflections and are designed to produce only minimum signal impact and modification during connection. These I-Net Profibus connectors are fitted with an On/Off switch visible from the front.
Popular items
394424, Provertha
ERNI SlimLine Right Angled Female Connectors
A range of slim-line through hole D-sub connectors from ERNI Electronics. These right angled female D-sub connectors have dual leaf spring contacts ensuring excellent stability and reliability. They also feature solder retention pegs which absorb mechanical stresses. With their slim-line design, the D-sub connectors provide up to 33% space saving on the board compared to other conventional connectors of its type.
D-Sub Connectors - ERNI
Popular items
Popular items
014243, Provertha
TMC Crimp Snap-In
Installation in KSG 183, 184 und 185 possible
Individual contact assignment, thus also partial assignment
Compatible with all common makes
Can also be applied to external tools
Tinned metal housing with laminated ribbing for the shielding
Selection guide
Insulation for crimp pins, laminated ribbing
TMC-P-CSI
ERNI no.
9-pin
014 177
15-pin
014 179
25-pin
014 181
50-pin
014 185
Insulation for crimp jacks
TMC-S-CSI
9-pin
014 176
15-pin
014 178
25-pin
014 180
Crimp contacts, pin
AWG 26-20, loose contacts
014 243
AWG 28-24, loose contacts
014 242
AWG 26-20, roll 500 contacts
014 246
Crimp contacts, jack
AWG 26-20, loose contacts
014 234
AWG 28-24, loose contacts
014 233
AWG 26-20, roll 500 contacts
014 237
TMC pin connectors, requirement stage 207
Versions:
TMC socket terminal strip, requirement stage 207
No. of pins:
2-row 9, 15, 25, 37 and 3-row 50 contacts
Conductor cross-section:
0.50-0.56mm
2
(AWG 20)
0.12-0.15mm
2
(AWG 26)
0.30-0.35mm
2
(AWG 22)
0.08-0.11mm
2
(AWG 28)
0.20-0.25mm
2
(AWG 24)
Temperature range:
-65° to +125°C
Permitted air humidity:
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances:
≥ 0.9mm
Operating current:
5A max
Contact:
1000V
eff
Contact/earth:
1200V
eff
Contact resistance:
≤10mΩ
Insulation resistance:
≥10
10
Ω
Shock and vibration
No contact interruption at 20g
strength:
and 10...2000Hz
Shock resistance:
up to 50g
Metal protective collar:
steel, tin-plated pin connector (P) with rippling
Insulation:
PBT 15% GV black
Inflammability:
Not flammable to UL 94V-0
Comparable tracking value
to
CTI 275/CTI 175M
DIN IEC 112 for PBT:
service life:
Requirement stage 2≥ 200 mating cycles
Popular items
013710, Provertha
Dip-soldered connection, angled at 90°, with guide frame, riveting nut
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
Popular items
Popular items
014234, Provertha
TMC Crimp Snap-In
Installation in KSG 183, 184 und 185 possible
Individual contact assignment, thus also partial assignment
Compatible with all common makes
Can also be applied to external tools
Tinned metal housing with laminated ribbing for the shielding
Selection guide
Insulation for crimp pins, laminated ribbing
TMC-P-CSI
ERNI no.
9-pin
014 177
15-pin
014 179
25-pin
014 181
50-pin
014 185
Insulation for crimp jacks
TMC-S-CSI
9-pin
014 176
15-pin
014 178
25-pin
014 180
Crimp contacts, pin
AWG 26-20, loose contacts
014 243
AWG 28-24, loose contacts
014 242
AWG 26-20, roll 500 contacts
014 246
Crimp contacts, jack
AWG 26-20, loose contacts
014 234
AWG 28-24, loose contacts
014 233
AWG 26-20, roll 500 contacts
014 237
TMC pin connectors, requirement stage 207
Versions:
TMC socket terminal strip, requirement stage 207
No. of pins:
2-row 9, 15, 25, 37 and 3-row 50 contacts
Conductor cross-section:
0.50-0.56mm
2
(AWG 20)
0.12-0.15mm
2
(AWG 26)
0.30-0.35mm
2
(AWG 22)
0.08-0.11mm
2
(AWG 28)
0.20-0.25mm
2
(AWG 24)
Temperature range:
-65° to +125°C
Permitted air humidity:
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances:
≥ 0.9mm
Operating current:
5A max
Contact:
1000V
eff
Contact/earth:
1200V
eff
Contact resistance:
≤10mΩ
Insulation resistance:
≥10
10
Ω
Shock and vibration
No contact interruption at 20g
strength:
and 10...2000Hz
Shock resistance:
up to 50g
Metal protective collar:
steel, tin-plated pin connector (P) with rippling
Insulation:
PBT 15% GV black
Inflammability:
Not flammable to UL 94V-0
Comparable tracking value
to
CTI 275/CTI 175M
DIN IEC 112 for PBT:
service life:
Requirement stage 2≥ 200 mating cycles
Popular items
023138, Provertha
Dip-soldered connection, straight, riveting nut and sleeve
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
Popular items
104370M001, Provertha
Quick Lock D-Sub Metalized Plastic Hoods - Provertha
The Provertha Quick Lock range of D-Sub metalized plastic hoods offers a Push_Pull locking system for easy, fast, blind-mating and secure connection of D-Sub cable connectors to D-Sub device interfaces. The 103 series of Quick Lock hoods have 2 cable inputs and the 104 series has 3 cable inputs. These Quick Lock hoods are suitable for use with crimp flanges, internal and external cable clamps.
Provertha D Type Connectors
Popular items
Popular items
004154, Provertha
Dip-soldered connection, angled at 90°, with guide frame, standard
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
New Items
New items
023183, Provertha
Dip-soldered connection, angled at 90°, with guide frame, riveting nut
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
New items
013710, Provertha
Dip-soldered connection, angled at 90°, with guide frame, riveting nut
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
New items
014243, Provertha
TMC Crimp Snap-In
Installation in KSG 183, 184 und 185 possible
Individual contact assignment, thus also partial assignment
Compatible with all common makes
Can also be applied to external tools
Tinned metal housing with laminated ribbing for the shielding
Selection guide
Insulation for crimp pins, laminated ribbing
TMC-P-CSI
ERNI no.
9-pin
014 177
15-pin
014 179
25-pin
014 181
50-pin
014 185
Insulation for crimp jacks
TMC-S-CSI
9-pin
014 176
15-pin
014 178
25-pin
014 180
Crimp contacts, pin
AWG 26-20, loose contacts
014 243
AWG 28-24, loose contacts
014 242
AWG 26-20, roll 500 contacts
014 246
Crimp contacts, jack
AWG 26-20, loose contacts
014 234
AWG 28-24, loose contacts
014 233
AWG 26-20, roll 500 contacts
014 237
TMC pin connectors, requirement stage 207
Versions:
TMC socket terminal strip, requirement stage 207
No. of pins:
2-row 9, 15, 25, 37 and 3-row 50 contacts
Conductor cross-section:
0.50-0.56mm
2
(AWG 20)
0.12-0.15mm
2
(AWG 26)
0.30-0.35mm
2
(AWG 22)
0.08-0.11mm
2
(AWG 28)
0.20-0.25mm
2
(AWG 24)
Temperature range:
-65° to +125°C
Permitted air humidity:
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances:
≥ 0.9mm
Operating current:
5A max
Contact:
1000V
eff
Contact/earth:
1200V
eff
Contact resistance:
≤10mΩ
Insulation resistance:
≥10
10
Ω
Shock and vibration
No contact interruption at 20g
strength:
and 10...2000Hz
Shock resistance:
up to 50g
Metal protective collar:
steel, tin-plated pin connector (P) with rippling
Insulation:
PBT 15% GV black
Inflammability:
Not flammable to UL 94V-0
Comparable tracking value
to
CTI 275/CTI 175M
DIN IEC 112 for PBT:
service life:
Requirement stage 2≥ 200 mating cycles
New items
104370M001, Provertha
Quick Lock D-Sub Metalized Plastic Hoods - Provertha
The Provertha Quick Lock range of D-Sub metalized plastic hoods offers a Push_Pull locking system for easy, fast, blind-mating and secure connection of D-Sub cable connectors to D-Sub device interfaces. The 103 series of Quick Lock hoods have 2 cable inputs and the 104 series has 3 cable inputs. These Quick Lock hoods are suitable for use with crimp flanges, internal and external cable clamps.
Provertha D Type Connectors
New items
New items
004154, Provertha
Dip-soldered connection, angled at 90°, with guide frame, standard
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
New items
New items
New items
394424, Provertha
ERNI SlimLine Right Angled Female Connectors
A range of slim-line through hole D-sub connectors from ERNI Electronics. These right angled female D-sub connectors have dual leaf spring contacts ensuring excellent stability and reliability. They also feature solder retention pegs which absorb mechanical stresses. With their slim-line design, the D-sub connectors provide up to 33% space saving on the board compared to other conventional connectors of its type.
D-Sub Connectors - ERNI
New items
40-1392142, Provertha
Profibus D Sub External Cable Clamp
These I-Net Profibus bus connectors with external cable clamp are suitable for large cables 4-14 mm diameter. There are four types of body configuration of the external cable clamp I-Net Profibus bus connectors: Standard, Compact, Axial and Special with Body Orientations of 90°, 90°, 180° and 55° respectively. The I-Net Profibus bus connectors are available in two versions, namely, Standard with one male 'D' port connector and PG with two, male and female, 'D' port connectors for monitoring, see table.
External Cable Clamp Stock Number Reference
Type / Version
Standard (1 'D' Port)
PG (2 'D' Ports)
Standard
729-6481
729-6491
Compact
729-6497
729-6504
Axial
729-6485
n/a
Special
729-6494
729-6501
I-Net Profibus Bus Connectors - Provertha
The Provertha I-Net Profibus 'D' bus connectors range feature Plug&Play M12 connectors as well as field assembly internal and external cable clamping versions. These I-Net Profibus connectors provide function and security for upto 40 Profibus participants at speeds of 12 Mbits/s. Configured for Profibus DP these I-Net Profibus connectors prevent signal reflections and are designed to produce only minimum signal impact and modification during connection. These I-Net Profibus connectors are fitted with an On/Off switch visible from the front.
New items
023138, Provertha
Dip-soldered connection, straight, riveting nut and sleeve
Sub-D connector Erni
Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination
Series TMC connectors are available in various housing sizes and with different numbers of pin.
Versions
TNC connectors,
quality level 207 and 201,
TMC terminal strips,
quality level 201
TMC
terminal
strips,
quality
level 207
No. of pins
2-row 9, 15, 25, 37 and 3-row 50 contacts
Temperature range
-65° to +125°C
Permitted air humidity
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances
≥1 mm
Working current at 25 °C
7.5 A max
5A max
Test voltage
contact/
Contact
Contact / earth
1000V
eff
1200 V
eff
Contact resistance
≤2.5 mΩ
≤10mΩ
Insulation resistance
≥5 x 10
9
Ω
Shock and vibration
resistance:
No contact interruption at 20g
and 10...2000Hz
Shock resistance
up to 50g
Metal protective collar
Bright tin-plated steel
MR St 4.1
+1
μm Ni, 8
±2
μ SN
Insulation
PBT 30% GV
PC 30% GV
Inflammability
Not flammable to UL 94V-0
Comparable tracking
value in accordance with
DIN IEC 112 for PBT
CTI 275/CTI 175M
Service life
Requirement stage 2≥ 200 mating cycles
Selection guide
A.
Spacer bolts with fastening clips
B.
Earthing pin
C.
Earthing handle
D.
Spacer bolts
E.
Standard
F.
Earthing clip
G.
Spacer bolts
H.
Threaded bolts
New items
014234, Provertha
TMC Crimp Snap-In
Installation in KSG 183, 184 und 185 possible
Individual contact assignment, thus also partial assignment
Compatible with all common makes
Can also be applied to external tools
Tinned metal housing with laminated ribbing for the shielding
Selection guide
Insulation for crimp pins, laminated ribbing
TMC-P-CSI
ERNI no.
9-pin
014 177
15-pin
014 179
25-pin
014 181
50-pin
014 185
Insulation for crimp jacks
TMC-S-CSI
9-pin
014 176
15-pin
014 178
25-pin
014 180
Crimp contacts, pin
AWG 26-20, loose contacts
014 243
AWG 28-24, loose contacts
014 242
AWG 26-20, roll 500 contacts
014 246
Crimp contacts, jack
AWG 26-20, loose contacts
014 234
AWG 28-24, loose contacts
014 233
AWG 26-20, roll 500 contacts
014 237
TMC pin connectors, requirement stage 207
Versions:
TMC socket terminal strip, requirement stage 207
No. of pins:
2-row 9, 15, 25, 37 and 3-row 50 contacts
Conductor cross-section:
0.50-0.56mm
2
(AWG 20)
0.12-0.15mm
2
(AWG 26)
0.30-0.35mm
2
(AWG 22)
0.08-0.11mm
2
(AWG 28)
0.20-0.25mm
2
(AWG 24)
Temperature range:
-65° to +125°C
Permitted air humidity:
Annual average ≤ 80%, max. 100%
Air gaps and creepage distances:
≥ 0.9mm
Operating current:
5A max
Contact:
1000V
eff
Contact/earth:
1200V
eff
Contact resistance:
≤10mΩ
Insulation resistance:
≥10
10
Ω
Shock and vibration
No contact interruption at 20g
strength:
and 10...2000Hz
Shock resistance:
up to 50g
Metal protective collar:
steel, tin-plated pin connector (P) with rippling
Insulation:
PBT 15% GV black
Inflammability:
Not flammable to UL 94V-0
Comparable tracking value
to
CTI 275/CTI 175M
DIN IEC 112 for PBT:
service life:
Requirement stage 2≥ 200 mating cycles
Don’t hesitate to ask questions for better clarification.