Replacement Solenoid Coils

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber

Control solenoid valves, 189 and 190 series Range of 3/2 NF solenoid valves used to control ISO distributors. Possible to use solenoid valves independently using simple or juxtaposable manifolds. Choice of 3 coil voltages (ordered separately). M5 threaded exhaust aperture. Compatible bases:  CNOMO 06.05.80 and AFNOR NFE 49066. Controlled fluid: filtered air or neutral gas; lubricated or not Operating pressure: 0 → 10 bar Operating temperature: -10 °C → +60 °C Response time: 5 ms Stock flow at no. description 6 bar Solenoid valves 278-4384 A passage 1.2 mm, manual screw control 50 l/mn 278-4407 A passage 1.6 mm, manual screw control 70 l/mn 278-4429 A passage 1.6 mm, manual pulse control 70 l/mn Sockets 278-4441 Simple G1/8 278-4457 Juxtaposable G1/8 Coils 278-4463 For 189 Series, 24 VDC 278-4479 For 189 Series, 24 VAC, 50 Hz 278-4485 For 189 Series, 230 VAC, 50 Hz 278-4508 For 190 Series, 24 VAC and 12 Vdc 278-4514 For 190 Series, 48 VAC and 24 Vdc 278-4520 For 190 Series, 230 VAC, 50 Hz ISO Technical specification Medium Filtered, lubricated & non-lubricated air Pressure ISO 1 – 10 bar single solenoid, ISO 2 – 10 bar double solenoid & pilot Flow Rate ISO 1 – 1200 l/min, ISO 2 – 2450 l/min Operating Temperature Range -20 to +50 °C (Consult our Technical Helpline for use below +2°C) Body material Cast Aluminium Spool and Sleeve Material Anodised Aluminium with PTFE coating Seal Material Nitrile Rubber