Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 12

Showing Results For: Lighting Transformers

Lighting Transformers

Lighting transformers are technical electrical devices integral to the operation of various lighting systems. They function by modifying voltage levels to suit specific lighting requirements, ensuring efficiency and safety. These transformers are pivotal in applications where the standard voltage needs adjustment to align with the lighting device's specifications.

Popular Types of Lighting Transformers

Lighting transformers are of various types bases on their sizes, shapes and funcionality, such as:

  • Step-Up Transformers: These transformers increase voltage from a lower level to a higher level, essential in situations where the lighting system requires more voltage than what is provided by the standard supply.
  • Step-Down Transformers: Typically used, these transformers decrease the voltage to a lower level, suitable for most residential and commercial lighting applications where the supply voltage is higher than what the lighting fixtures require.
  • Isolation Transformers: Designed to isolate the lighting circuit from the main power source, these transformers enhance safety and prevent electrical noise interference, ensuring a stable and consistent lighting performance.
  • Electronic Transformers: Specifically designed for low-voltage lighting systems like halogen lights, these transformers are compact, efficient, and generate less heat compared to traditional magnetic transformers.
  • Magnetic Transformers: Known for their durability and reliability, these transformers are ideal for outdoor and landscape lighting. They are less sensitive to voltage fluctuations and can handle higher loads.

Salient Features and Benefits

  • By adjusting voltage levels, lighting transformers ensure that lighting systems operate efficiently and safely.
  • Modern transformers are designed to minimize energy loss, contributing to lower operational.
  • With various types available, lighting transformers cater to a wide range of lighting systems.
  • High-quality materials and design make these transformers robust and dependable.
  • By isolating and controlling voltage, they significantly reduce the risk of electrical hazards.

Applications of Lighting Transformers in Illumination

Lighting transformers are not just components; they are the unsung heroes in the world of illumination. They are typically employed in various scenarios, including:

  • Residential Lighting: In homes, transformers are used to power low-voltage lighting systems like under-cabinet lights or certain types of ceiling fixtures.
  • Commercial Spaces: Offices, shopping malls, and other commercial establishments employ lighting transformers for efficient and safe operation of their diverse lighting systems.
  • Industrial Settings: In industries where precise and reliable lighting is crucial, such as manufacturing plants, transformers play a vital role in maintaining consistent lighting conditions.
  • Outdoor and Landscape Lighting: For garden lights, streetlamps, and other outdoor lighting fixtures, transformers are essential to ensure they operate safely at the required voltage levels.
  • Specialised Applications: In theaters, art galleries, and museums, lighting transformers are used to create specific lighting effects and manage delicate lighting systems.

FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Schneider Electric
Rohs Verified
ZBV5B, Schneider Electric
65 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 31.30
Rohs Verified
4008321927026, Osram
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 44.38
Rohs Verified
4050300442310, Osram 1
27 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 23.98
Rohs Verified
4050300442334, Osram 1
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.19
Osram 1
Rohs Verified
927026, Osram 1
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 44.75
Osram
Rohs Verified
442310, Osram
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 18.88
Block
Rohs Verified
HIT250, Block
56 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 63.05
Osram
Rohs Verified
442334, Osram
29 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 23.14
Rohs Verified
94386, GE
9 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.10
Sunnex
12080, Sunnex
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 43.52
Osram
Rohs Verified
927026, Osram
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 37.22
Sunnex
12060, Sunnex
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 51.42
Showing
1 -

New Items
New items
ZBV5B, Schneider Electric

ZBV5B, Schneider Electric

The Schneider Electric Harmony ZB, transformer block is supplied with 400Vac. It is compatible with Harmony XB4 and XB5 light blocks with integral LED. It protects operators from unexpected contact with live circuits thanks to its IP20 protection index. Mercury free Yes
New items
94386, GE

94386, GE

GE Lighting 12 V Dimmable Electronic Transformer This 12 V Electronic Transformer comes in a brand new compact size design, which makes it the ideal choice for delicate lighting fixtures. Ideal applications for this GE Electronic Transformer are in offices, hospitals, shops, hotels, supermarkets, airports, subways and railway stations. Terminal connector to shorten operation lead time High efficiency, high reliability High power factor, low THD Average life 20,000 hours Approvals CE, CB Harmonic: IEC 61000-3-2 EMC: IEC 61547 EMI: CISPR15 Safety: IEC 61347-1, IEC 61347-2-3 Low Voltage Lighting Transformers Dimming Methods (where applicable): Leading Edge: The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed. Trailing Edge: Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.
New items
4008321927026, Osram

4008321927026, Osram

OSRAM HALOTRONIC PROFESSIONAL HTL Transformer Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs and halogen lamps?
New items
4050300442310, Osram 1

4050300442310, Osram 1

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?
New items
4050300442334, Osram 1

4050300442334, Osram 1

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?
New items
12080, Sunnex

12080, Sunnex

Flexible Arm Long, Machine/ Inspection Light Rugged base for machine or inspection use Short arm head rotates 360° and 90° Uses 12V 35W capsule lamp which fits into the aluminium reflector in the lamp head IP20 rated
New items
12060, Sunnex

12060, Sunnex

Flexible Arm Long, Machine/ Inspection Light Rugged base for machine or inspection use Short arm head rotates 360° and 90° Uses 12V 35W capsule lamp which fits into the aluminium reflector in the lamp head IP20 rated
New items
442334, Osram

442334, Osram

Mouse Transformers These transformers are particularly appreciated for their asymmetrical shape and super-compact size, their lightweight and easily accessible terminals which enable them to be very easily flush mounted in small, narrow recesses cut for low-voltage spot lighting in false ceilings. Resistant to short-circuits, controllable using dimmer switch. Protected against high temperatures and overloads. Meet all requirements relative to safety, operation and electromagnetic compatibility. They carry the European ENEC label. TMC Osram: HTM 70 HTM 105 Operating voltage: 230 V / 240 V 230 V / 240 V Output voltage: 11.4 V to 20 W 11.3 V to 35 W Frequency: 50 // 60 Hz 50 // 60 Hz Nominal current: 0.27 A 0.42 A Permitted power: 20 → 70 W 35 → 105 W Dimensions (mm): 108 x 52 x 33 108 x 52 x 33 Low Voltage Lighting Transformers Dimming Methods (where applicable): Leading Edge: The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed. Trailing Edge: Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.
New items
927026, Osram

927026, Osram

HALOTRONIC Transformers Electronic transformers for converting and lowering voltages for 12 V, very low-voltage halogen lights. Operates on 230 → 240 V power supplies; 0.50 → 60 Hz. Maximum admissible ambient temperature of 50 °C. Able to work on all variable controllers, at the start or the end of phase. Able to tap into the primary circuit to supply the other HTLs. Designed for surface or flush-mounted devices, tubular lighting systems and domestic lighting. For use with direct current and emergency lighting installations. Reversible electronic safety protection against short-circuits, overheating and overloads. Standards EN 55015, EN 61000-3-2, EN 61547, EN 61047 Low Voltage Lighting Transformers Dimming Methods (where applicable): Leading Edge: The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed. Trailing Edge: Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.
New items
927026, Osram 1

927026, Osram 1

OSRAM HALOTRONIC PROFESSIONAL HTL Transformer Introducing the HALOTRONIC PROFESSIONAL HTL, a dimmable on the leading and trailing edge, electronic transformer. It protects from short-circuit, overtemperature and overload (electronically reversible) and has electrical isolation between the primary and secondary sides. Switching between the electronic transformer and the lamp is not permitted. With high levels of energy efficiency, this transformer has many applications but is particularly good for effect and accent lighting, object lighting and furniture luminaires (recessed and surface-mounted). It is also good for living rooms, conference and event rooms, shop lighting and restaurant lighting. High efficacy means that little power is lost, and HALOTRONIC PROFESSIONAL HTL covers a large temperature range. Protective operation throughout the partial-load range prolongs lamp life, and you can through-wire on the primary side. Features and Benefits: • Very low power loss thanks to high efficacy • Through-wiring possible on the primary side • Large temperature range • Protective operation throughout the entire partial-load range for long lamp life • Electronic transformers for converting and lowering voltages for 12 V, very low-voltage halogen lights • Operates on 230 → 240 V power supplies; 0.50 → 60 Hz • The maximum admissible ambient temperature of 50 °C • Able to work on all variable controllers, at the start or the end of phase • Able to tap into the primary circuit to supply the other HTLs • High efficiency • Line frequency: 50…60 Hz • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Electrical isolation between the primary side and the secondary side • Energy efficiency: ≥ 91 % (according to ErP regulation 2012/1194/EC) • Dimmable on the leading edge and trailing edge • Suitable for emergency installation Approvals and Certification: ...
New items
HIT250, Block

HIT250, Block

Halogen transformer, HIT series Adjusting the voltage to the optimum setting for the transformer extends the service life of the halogen bulbs Input and output-end screw connection terminals with strain relief During normal mains overvoltage, the nominal voltage of the halogen bulbs is not exceeded Integrated fuse protection and temperature limiter serve as protection in the event of short-circuit and overload Easy to use, even where the fire behaviour of the building material (wood, furniture, internal ceilings) is unknown Short-circuit proof safety transformers in cast resin, fully encapsulated to supply 12 V halogen bulbs Test voltage: Between input and output circuits 5000 V, 50 Hz Short-circuit proof: Conditionally short-circuit proof (no fuse protection required) Design: Encapsulated in the insulation housing Protection class II Protection rating: IP40 housing Connection leads: IP 00W (HIT 60/L and HIT 105/L) Ambient temperature: 40°C Insulation category: A (of the insulation system) Input voltage: 230 V With special transformer dimmer suitable for adjusting brightness Frequency: 50 Hz to 60 Hz Output voltage: 11.5 V at full load Leads: PRI: screw connection terminals or mains connection cable, 2 m long SEC: screw connection terminals or cables, approximately 1 m long with wire end ferrules Mounting: Can be mounted via perforations in the clamp connection boxes Colour: White Standards VDE 0570 part 2-6, IEC 61558-2-6, DIN EN 61558-2-6 Approvals VDE 0551 Standards EN61558
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Lighting Transformers and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Lighting Transformers or any other product.
This depends on the Lighting Transformers individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Lighting Transformers and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Lighting Transformers.
Yes. We keep updating our stock frequently and if a product like Lighting Transformers is not in stock then we will let you know.