Osram 1

QUICKTRONIC Intelligent DIM Dimmable Electronic Control Gear The Osram Quicktronic Intelligent DIM T5 is a dimmable electronic control gear for fluorescent lamps. This ECG guarantees the same luminous flux with direct and alternating current. The Quicktronic Intelligent DIM T5 is the perfect electronic ballast for use with motion sensor lighting. Ideal applications for the Quicktronic-M ECG are in emergency installations, public buildings, open plan offices, corridors and storage rooms. Also suitable for luminaires of protection class I. Same luminous flux with direct and alternating current Perfect lamp start for applications with motion sensors Dimming of amalgam lamps without flickering or reduced lifespan Very high efficiency thanks to cut-off technology Automatic restart after lamp replacement ECGs comply with MINERGIE standard due to very low standby consumption Configurable emergency power characteristics Control via DALI Supply voltage: 220-240 V Line frequency: 0 Hz | 50 Hz | 60 Hz Line voltage: 198-264 V Dimming range: 1-100 % luminous flux Lamp start: within 0.6 s Lifetime up to 100,000 hours Automatic shutdown of defective lamps and at end of life Energy Efficiency Index EEI: A1 BAT Overtemperature protection: Thermal management at high tc temperatures

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?

POWERTRONIC PT-FIT I Electronic Control Gear for HID Lamps with Cable Lamp The Osram Powertronic PT-FIT I is an electronic control gear with cable clamp for HID lamps. This ECG guarantees a long lamp life at maximum permitted temperatures. The Powertronic PT-FIT I features extended terminal section, which enables mains looping. This ECG has an ergonomic strain relief for correct installation in suspended ceilings. Ideal applications for the Powertronic PT-FIT I are in shop lighting, health and fitness areas, effect and accent lighting. ECG with ergonomic strain relief Optimized cost/benefit factor Automatic safety shutdown of lamps in the event of a defect or at end of life Energy Efficiency Index EEI: A2 Supply voltage: 220-240 V Line frequency: 50-60 Hz

QUICKTRONIC Intelligent DIM Dimmable Electronic Control Gear The Osram Quicktronic Intelligent DIM T5 is a dimmable electronic control gear for fluorescent lamps. This ECG guarantees the same luminous flux with direct and alternating current. The Quicktronic Intelligent DIM T5 is the perfect electronic ballast for use with motion sensor lighting. Ideal applications for the Quicktronic-M ECG are in emergency installations, public buildings, open plan offices, corridors and storage rooms. Also suitable for luminaires of protection class I. Same luminous flux with direct and alternating current Perfect lamp start for applications with motion sensors Dimming of amalgam lamps without flickering or reduced lifespan Very high efficiency thanks to cut-off technology Automatic restart after lamp replacement ECGs comply with MINERGIE standard due to very low standby consumption Configurable emergency power characteristics Control via DALI Supply voltage: 220-240 V Line frequency: 0 Hz | 50 Hz | 60 Hz Line voltage: 198-264 V Dimming range: 1-100 % luminous flux Lamp start: within 0.6 s Lifetime up to 100,000 hours Automatic shutdown of defective lamps and at end of life Energy Efficiency Index EEI: A1 BAT Overtemperature protection: Thermal management at high tc temperatures

OSRAM HALOTRONIC PROFESSIONAL HTL Transformer Introducing the HALOTRONIC PROFESSIONAL HTL, a dimmable on the leading and trailing edge, electronic transformer. It protects from short-circuit, overtemperature and overload (electronically reversible) and has electrical isolation between the primary and secondary sides. Switching between the electronic transformer and the lamp is not permitted. With high levels of energy efficiency, this transformer has many applications but is particularly good for effect and accent lighting, object lighting and furniture luminaires (recessed and surface-mounted). It is also good for living rooms, conference and event rooms, shop lighting and restaurant lighting. High efficacy means that little power is lost, and HALOTRONIC PROFESSIONAL HTL covers a large temperature range. Protective operation throughout the partial-load range prolongs lamp life, and you can through-wire on the primary side. Features and Benefits: • Very low power loss thanks to high efficacy • Through-wiring possible on the primary side • Large temperature range • Protective operation throughout the entire partial-load range for long lamp life • Electronic transformers for converting and lowering voltages for 12 V, very low-voltage halogen lights • Operates on 230 → 240 V power supplies; 0.50 → 60 Hz • The maximum admissible ambient temperature of 50 °C • Able to work on all variable controllers, at the start or the end of phase • Able to tap into the primary circuit to supply the other HTLs • High efficiency • Line frequency: 50…60 Hz • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Electrical isolation between the primary side and the secondary side • Energy efficiency: ≥ 91 % (according to ErP regulation 2012/1194/EC) • Dimmable on the leading edge and trailing edge • Suitable for emergency installation Approvals and Certification: ...

QUICKTRONIC Intelligent DIM Dimmable Electronic Control Gear The Osram Quicktronic Intelligent DIM T5 is a dimmable electronic control gear for fluorescent lamps. This ECG guarantees the same luminous flux with direct and alternating current. The Quicktronic Intelligent DIM T5 is the perfect electronic ballast for use with motion sensor lighting. Ideal applications for the Quicktronic-M ECG are in emergency installations, public buildings, open plan offices, corridors and storage rooms. Also suitable for luminaires of protection class I. Same luminous flux with direct and alternating current Perfect lamp start for applications with motion sensors Dimming of amalgam lamps without flickering or reduced lifespan Very high efficiency thanks to cut-off technology Automatic restart after lamp replacement ECGs comply with MINERGIE standard due to very low standby consumption Configurable emergency power characteristics Control via DALI Supply voltage: 220-240 V Line frequency: 0 Hz | 50 Hz | 60 Hz Line voltage: 198-264 V Dimming range: 1-100 % luminous flux Lamp start: within 0.6 s Lifetime up to 100,000 hours Automatic shutdown of defective lamps and at end of life Energy Efficiency Index EEI: A1 BAT Overtemperature protection: Thermal management at high tc temperatures

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?

OSRAM HALOTRONIC COMPACT Transformers 281-8128 281-8134 Features and Benefits: Approvals and Certification: Typical Applications: FAQs: Is this transformer suitable for LEDs?

POWERTRONIC PT-FIT I Electronic Control Gear for HID Lamps with Cable Lamp The Osram Powertronic PT-FIT I is an electronic control gear with cable clamp for HID lamps. This ECG guarantees a long lamp life at maximum permitted temperatures. The Powertronic PT-FIT I features extended terminal section, which enables mains looping. This ECG has an ergonomic strain relief for correct installation in suspended ceilings. Ideal applications for the Powertronic PT-FIT I are in shop lighting, health and fitness areas, effect and accent lighting. ECG with ergonomic strain relief Optimized cost/benefit factor Automatic safety shutdown of lamps in the event of a defect or at end of life Energy Efficiency Index EEI: A2 Supply voltage: 220-240 V Line frequency: 50-60 Hz

QUICKTRONIC Intelligent DIM Dimmable Electronic Control Gear The Osram Quicktronic Intelligent DIM T5 is a dimmable electronic control gear for fluorescent lamps. This ECG guarantees the same luminous flux with direct and alternating current. The Quicktronic Intelligent DIM T5 is the perfect electronic ballast for use with motion sensor lighting. Ideal applications for the Quicktronic-M ECG are in emergency installations, public buildings, open plan offices, corridors and storage rooms. Also suitable for luminaires of protection class I. Same luminous flux with direct and alternating current Perfect lamp start for applications with motion sensors Dimming of amalgam lamps without flickering or reduced lifespan Very high efficiency thanks to cut-off technology Automatic restart after lamp replacement ECGs comply with MINERGIE standard due to very low standby consumption Configurable emergency power characteristics Control via DALI Supply voltage: 220-240 V Line frequency: 0 Hz | 50 Hz | 60 Hz Line voltage: 198-264 V Dimming range: 1-100 % luminous flux Lamp start: within 0.6 s Lifetime up to 100,000 hours Automatic shutdown of defective lamps and at end of life Energy Efficiency Index EEI: A1 BAT Overtemperature protection: Thermal management at high tc temperatures

OSRAM HALOTRONIC PROFESSIONAL HTL Transformer Introducing the HALOTRONIC PROFESSIONAL HTL, a dimmable on the leading and trailing edge, electronic transformer. It protects from short-circuit, overtemperature and overload (electronically reversible) and has electrical isolation between the primary and secondary sides. Switching between the electronic transformer and the lamp is not permitted. With high levels of energy efficiency, this transformer has many applications but is particularly good for effect and accent lighting, object lighting and furniture luminaires (recessed and surface-mounted). It is also good for living rooms, conference and event rooms, shop lighting and restaurant lighting. High efficacy means that little power is lost, and HALOTRONIC PROFESSIONAL HTL covers a large temperature range. Protective operation throughout the partial-load range prolongs lamp life, and you can through-wire on the primary side. Features and Benefits: • Very low power loss thanks to high efficacy • Through-wiring possible on the primary side • Large temperature range • Protective operation throughout the entire partial-load range for long lamp life • Electronic transformers for converting and lowering voltages for 12 V, very low-voltage halogen lights • Operates on 230 → 240 V power supplies; 0.50 → 60 Hz • The maximum admissible ambient temperature of 50 °C • Able to work on all variable controllers, at the start or the end of phase • Able to tap into the primary circuit to supply the other HTLs • High efficiency • Line frequency: 50…60 Hz • Short-circuit protection, overload protection, overtemperature protection: electronically reversible • Electrical isolation between the primary side and the secondary side • Energy efficiency: ≥ 91 % (according to ErP regulation 2012/1194/EC) • Dimmable on the leading edge and trailing edge • Suitable for emergency installation Approvals and Certification: ...