What are the shipping charges for products like Phase Rotation Testers?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

Where are your products like Phase Rotation Testers manufactured?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Phase Rotation Testers?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

How long will it take to receive the order that I placed for Phase Rotation Testers?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

Are your products Phase Rotation Testers in stock?

Yes. We keep updating our stock frequently and if a product like Phase Rotation Testers is not in stock then we will let you know.

Phase Rotation Testers | Phase Sequence Meter

New items

MS152, Catu

Phase order indicator Rotating fields indicated via LED. Rotation direction indicated by "OK" and "Reverse" arrows. Fault detection LEDs for connection errors, cut or absent phase or neutral amongst the phases. Operating range: 90 → 400 V, 50 // 60 Hz Protection index: IP43-3 Dimensions (mm): 60 x 25 x 100 Weight: 100 g Supplied with test prods, alligator clips and carry case

Product Detail

New items

PRM-6-EUR, Beha-Amprobe

Product Detail

New items

KEW8031F, Kyoritsu

KEW8031F Phase Rotation Tester The 8031F tester indicates phase sequence by a rotating disc which gives clear feedback. A system of lamps also indicates open circuit phases. Small, lightweight and compact in design with no exposed metal parts. A test button is incorporated in the design. The unit is supplied with 1.5 m GS38 fused test lead with probe clip and crocodile clip options. The unit has a wide operating range from 110 V → 600 V and 40 Hz → 400 Hz. Phase indicator designed to check the presence of open phase and phase sequence by rotating disk lamps Wide check range of 3 phase power source from 110 V → 600 V Colour coded to conform with both old and new EU colour regulations 1.5 m fused leads with screw-in crocodile clips Operational Voltage: 110 V ac to 600 V ac Time limit for continuous >500 V: Within 5 min Frequency Response: 40 Hz to 200 Hz (AC 110 to 200 V) 40 Hz to 400 Hz (AC 200 V to 600 V) Safety Standard: IEC61010 to1 CATIII 600 V Pollution Degree 2 Supplied with GS38 test leads, carry pouch and instructions.

Product Detail

New items

123-1933, RS Pro

RS Pro RS9010 Phase Rotation Indicator LCD RS Pro RS9010 is a great value hand held instrument designed to detect the rotary field of 3 phase systems. Nominal Voltage: 40 V to 690 V ac Frequency Range: 15 Hz to 400 Hz Current Pickup: 1 mA Nominal test current (per phase) 1 mA Power supply from unit under test Electrical safety IEC61010/EN61010, IEC61557-7/EN61557-7 Protection level CAT III 600 V to ground Protection to IP40 Operating temperature 0°C to 40°C 3 Phase indication Indication of the phase rotation direction Clear LCD display No battery required Pollution Degree: 2 Dimensions: 130 mm x 69 mm x 32 mm Weight: 130 g Standards IEC61010 / EN61010, IEC61557-7 / EN61557-7 Supplied with Self-retaining test leads x3, alligator clips x3, carrying case and user manual

Product Detail

New items

FLUKE-9062, Fluke

Fluke 9062 Motor & Phase Rotation Indicator Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection. Suitable for commercial and industrial environments. Fluke provides rapid indication of 3 phase rotation using the test leads supplied. It can be used to determine motor rotation on synchronous and asynchronous 3 phase motors. The contact-less detection is ideal for use on motors where the shaft is not visible. The test probes supplied have a variable clamping range for safe contact, notably with industrial sockets. 3 phase indication via LED Indication of phase rotation Indication of motor rotation direction Contact free determination of the rotation direction of running motors Determine the presence of phase sequence of multiphase electrical supplies Determine the rotation of running motors simply by placing the instrument on the motor casing Check the correct rotation of motors prior to connection Fused test leads with 4 mm exposed metal tips Voltage Range: Up to 400 V Phase Display: 120 V ac - 400 V ac Frequency Range: 2 Hz - 400 Hz Operating Timer: Continuous Operating Temperature: 0⁰C to 40⁰C Operating Altitude: Up to 2000 m Humidity (Without Condensation): 15% to 80% Protection Degree: IP 40 Size: 124 mm x 61 mm x 27 mm Weight: 0.15 Kg Batteries: 1 x 9 V Measurement Category: CAT III, 300 V Safety Complying with: IEC61010 / EN61010, IEC61557-7 / EN61557-7 Caution The above unit should be checked for correct operation using a known voltage before and after use. Supplied with 3 test leads (black), 3 flexible test probes (black), 3 alligator clips (black), 1 x 9 V battery and user manual Caution The above unit should be checked for correct operation using a known voltage before and after use.

Product Detail

New items

FLUKE 9040/UK, Fluke

Fluke 9040 Indication of the three phases via LCD Indication of the phase rotation direction via LCD Swift determination of the phase sequence in three-phase networks Voltage and frequency range suitable for industrial systems LC-display with good visibility in bright areas (i.e. outdoor) Non-Fused test probes (500mA 1000V fast acting) Technical Specification Voltage Range 40 to 700 V Current Consumption approx. 1 mA @ 700 V Frequency Range 15 to 400 Hz Measurement category CAT III, 600 V / CAT IV, 300V Safety Complying with IEC61010 / EN61010, IEC61557-7 / EN61557-7 Supplied with 3 Non-Fused test probes, 3 crocodile clips, instruction manual. Caution The above unit should be checked for correct operation using a known voltage before and after use.

Product Detail

New items

M620A, Gossen Metrawatt

Phase sequence indicator MetraPhase 1 Phase sequence indicator with electronic rotary disk, frequency display and nominal voltage display Rotary field direction display by 6 optically rotating LEDs with colour switching Nominal supply voltage displayed by 3 LEDs Nominal supply frequency displayed by 6 LEDs Error indication: imbalance and missing phases Safety: CAT III 600V Optional accessories Protective rubber holster GH18 (stock no.: 292-1375 ) Nominal supply voltages 120 / 208 V; 230 / 400 V; 400 / 690 V Total voltage range 100 → 690 V Supply frequencies 50; 60; 100; 200; 300 and 400 Hz Total frequency range 15 → 410 Hz Supplied with METRAPHASE 1, 3 pluggable measuring leads with contact-protected connectors, 3 push-on measuring tips for contact-protected connector, 1 push-on alligator clip for contact-protected connector, 4 batteries, operating instructions, 1 carry case Sorry Your request could not be completed at this time

Product Detail

New items

891-0961, RS Pro

Product Detail

New items

PC15250, Martindale

Phase Rotation & Continuity Indicator Martindale PC15250 This indicator will prove continuity, or identify fault condition, of all three lines and shows the sequence of phase rotation. It's a fast, effective method of identifying worn or unmarked cables and ensures 3-phase outlets and machines are wired correctly. The retractable GS38 probe shields give a choice of long, exposed tips for inaccessible contacts or safer, shorter lengths for increased safety. Caution The above unit should be checked for correct operation using a known voltage before and after use. Supplied with One fused crocodile clip, two fused prods with retractable GS38 shrouds, instructions Both versions supplied with: A plastic wallet and full instructions for use. Caution The above unit should be checked for correct operation using a known voltage before and after use.

Product Detail

New items

FLUKE 9062, Fluke

Fluke 9062 Motor & Phase Rotation Indicator Fluke 9062 provides rotary field and motor rotation indication with the benefits of contact-less detection. Suitable for commercial and industrial environments. Fluke provides rapid indication of 3 phase rotation using the test leads supplied. It can be used to determine motor rotation on synchronous and asynchronous 3 phase motors. The contact-less detection is ideal for use on motors where the shaft is not visible. The test probes supplied have a variable clamping range for safe contact, notably with industrial sockets. 3 phase indication via LED Indication of phase rotation Indication of motor rotation direction Contact free determination of the rotation direction of running motors Determine the presence of phase sequence of multiphase electrical supplies Determine the rotation of running motors simply by placing the instrument on the motor casing Check the correct rotation of motors prior to connection Fused test leads with 4 mm exposed metal tips Voltage Range: Up to 400 V Phase Display: 120 V ac - 400 V ac Frequency Range: 2 Hz - 400 Hz Operating Timer: Continuous Operating Temperature: 0⁰C to 40⁰C Operating Altitude: Up to 2000 m Humidity (Without Condensation): 15% to 80% Protection Degree: IP 40 Size: 124 mm x 61 mm x 27 mm Weight: 0.15 Kg Batteries: 1 x 9 V Measurement Category: CAT III, 300 V Safety Complying with: IEC61010 / EN61010, IEC61557-7 / EN61557-7 Caution The above unit should be checked for correct operation using a known voltage before and after use. Supplied with 3 test leads (black), 3 flexible test probes (black), 3 alligator clips (black), 1 x 9 V battery and user manual Caution The above unit should be checked for correct operation using a known voltage before and after use.

Product Detail

New items

DR706IVXFR, Sibille

The Sibille phase rotation indicator provides a safe, reliable and comfortable phase rotation indication. The unique bright LED display can be read in direct sunlight and it is ergonomically shaped to fit comfortably in the palm with a range that can be adapted to your needs. The heavy duty waterproof housing (can be used in rain), it can be used in all weathers and it is supplied in a soft case. It comes with replaceable leads with European colour codes and L1/L2/L3 marking (other markings or colours to order).All functions can be operated whilst wearing insulating gloves Indication by chasing green LEDs for clockwise rotation and chasing red LEDs for the counter-clockwise rotation Voltage range from 90Vac to 400 Vac AC frequency range from 50 Hz & 60 Hz Maximum rated voltage of 400 V three phase system It is 600V cat III (IP54) or cat. IV (IP65)

Product Detail

New items

891-0970, RS Pro

RS-9020 Motor and Phase Rotation Indicator with Contact Free Detection The RS-9020 motor and phase rotation indicator is a great value, handheld, battery-operated instrument designed to detect the rotary field of three-phase systems and to determine motor-rotation direction. Rotary field Indicator – LED indication of the three phases Motor rotation Indicator – LED display of motor rotation direction Contact free determination of the rotation direction of running motors Magnetic field detection to detect AC solenoid valve Dimensions 130 x 69 x 32 mm Weight 130 g Standards IEC61010 / EN61010, IEC61557-7 / EN61557-7 Supplied with Self-retaining test leads (x3), alligator clips (x3), carrying case, user manual

Product Detail