Featured Products
KEW8031F Phase Rotation Tester The 8031F tester indicates phase sequence by a rotating disc which gives clear feedb...
The Kyoritsu has large display with 6000 counts and backlight. It has enhanced current measuring function using an external clamp sensor. This pr...
The Kyoritsu microprocessor controlled digital insulation tester. They not only permit insulation resistance measurement on three rated test volt...
The Kyoritsu multimeter has high accuracy, high performance and reliable measurements. TRMS measurement ensures accurate readings, avoiding error...
The Kyoritsu AC digital clamp meter has ergonomic over-molded body gives convenient one-hand operation. It has large easy-to-read display with 0....
The Kyoritsu phase detector has voltage measurement range from 200 to 480 V. Phase order and open phase can be checked with both the LEDs and buz...
The Kyoritsu clamp meter can be measure the voltage and current in both very high and low power circuit. Thus, it is very useful for power distri...
The Kyoritsu earth and insulation tester suitable for the photovoltaic panel market correct measuring for insulation resistance even if the panel...
KEW8035 Non-contact Phase Rotation Tester KEW8035 the first non-contact phase rotation tester. Safely test...
Popular Categories For Kyoritsu
Categories For Kyoritsu
Popular Items
Popular items
KEW8031F, Kyoritsu
KEW8031F Phase Rotation Tester
The 8031F tester indicates phase sequence by a rotating disc which gives clear feedback. A system of lamps also indicates open circuit phases.
Small, lightweight and compact in design with no exposed metal parts. A test button is incorporated in the design.
The unit is supplied with 1.5 m GS38 fused test lead with probe clip and crocodile clip options. The unit has a wide operating range from 110 V → 600 V and 40 Hz → 400 Hz.
Phase indicator designed to check the presence of open phase and phase sequence by rotating disk lamps
Wide check range of 3 phase power source from 110 V → 600 V
Colour coded to conform with both old and new EU colour regulations
1.5 m fused leads with screw-in crocodile clips
Operational Voltage: 110 V ac to 600 V ac
Time limit for continuous >500 V: Within 5 min
Frequency Response: 40 Hz to 200 Hz (AC 110 to 200 V) 40 Hz to 400 Hz (AC 200 V to 600 V)
Safety Standard: IEC61010 to1 CATIII 600 V Pollution Degree 2
Supplied with
GS38 test leads, carry pouch and instructions.
Popular items
K1021R, Kyoritsu
The Kyoritsu has large display with 6000 counts and backlight. It has enhanced current measuring function using an external clamp sensor. This product has two detachable holders, flat and wing type. Also it has accurate reading with true RMS safety standard.
Elegant and easy-to-use cabinet
Wing-type holder and flat-type holder
Popular items
K3132A, Kyoritsu
The Kyoritsu microprocessor controlled digital insulation tester. They not only permit insulation resistance measurement on three rated test voltage and continuity testing, but also offer a number of advanced feature such as a bargraph reading of insulation resistance, auto null function for continuity testing.
Live circuit warning buzzer and neon lamp
Small and lightweight
Shock resistant new case material
Easy-to-read scale
Popular items
K1051, Kyoritsu
The Kyoritsu multimeter has high accuracy, high performance and reliable measurements. TRMS measurement ensures accurate readings, avoiding errors which can occur when non-sinusoidal waveforms, created by common non linear loads such PCs, Inverters, switch-mode power supplies are measured.
Low-pass filter for motor drive measurements
User calibration function
Dual display
Popular items
K2117R, Kyoritsu
The Kyoritsu AC digital clamp meter has ergonomic over-molded body gives convenient one-hand operation. It has large easy-to-read display with 0.01 A resolution and long battery life.
Fully safety jaw
Accurate reading with True RMS
Popular items
KEW 8033, Kyoritsu
The Kyoritsu phase detector has voltage measurement range from 200 to 480 V. Phase order and open phase can be checked with both the LEDs and buzzer.
Work efficiency is improved by using the suction plate attached to the measurement code
Popular items
K2046R, Kyoritsu
The Kyoritsu clamp meter can be measure the voltage and current in both very high and low power circuit. Thus, it is very useful for power distribution companies, power utilize and maintenance fields. It has double molding gives comfortable feeling in palm.
True RMS enables an accurate measurement
6039 counts with bar graph display
Popular items
K6024PV, Kyoritsu
The Kyoritsu earth and insulation tester suitable for the photovoltaic panel market correct measuring for insulation resistance even if the panel is under generating power. It has waterproof design so can measure under the bad weather condition.
Memory function up to 1000 data
Luminescence button and backlight
Popular items
KEW8035, Kyoritsu
KEW8035 Non-contact Phase Rotation Tester
KEW8035 the first non-contact phase rotation tester. Safely test phase rotation without the need to expose live contacts. The unit requires no metal contact ideal for safer and faster testing. Super bright mode gives clear indication even in bright sunlight.
KEW8035 uses a combination of LED and audible tones to indicate phase direction. Green LEDs are used for clockwise direction with an intermittent tone. Red LEDs are used for anti clockwise direction with a continuous tone. The tester is suitable for a wide range of 3 phase installations from 70 V to 1000 V ac. It comes with a magnetised back for attachment to a metallic surface for hands-free testing.
Permits safe testing, without the need of direct contact between probes and live wires
Wide measuring range for 3 phase installations from 70 V → 1000 V ac
The insulated crocodile clips can clip insulated cables from Ø 2.4 mm → 30 mm
Double insulated cables, length approx. 70 cm
KEW8035 can be fixed to a metal panel via the magnet on the back
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
Complies with IEC61010-1 CAT.IV 600 V and CAT.III 1000 V
Supplied with
9096 (Carrying case), Alkaline battery (LR6)
´
4 and Instruction manual
Popular items
New Items
New items
KEW8031F, Kyoritsu
KEW8031F Phase Rotation Tester
The 8031F tester indicates phase sequence by a rotating disc which gives clear feedback. A system of lamps also indicates open circuit phases.
Small, lightweight and compact in design with no exposed metal parts. A test button is incorporated in the design.
The unit is supplied with 1.5 m GS38 fused test lead with probe clip and crocodile clip options. The unit has a wide operating range from 110 V → 600 V and 40 Hz → 400 Hz.
Phase indicator designed to check the presence of open phase and phase sequence by rotating disk lamps
Wide check range of 3 phase power source from 110 V → 600 V
Colour coded to conform with both old and new EU colour regulations
1.5 m fused leads with screw-in crocodile clips
Operational Voltage: 110 V ac to 600 V ac
Time limit for continuous >500 V: Within 5 min
Frequency Response: 40 Hz to 200 Hz (AC 110 to 200 V) 40 Hz to 400 Hz (AC 200 V to 600 V)
Safety Standard: IEC61010 to1 CATIII 600 V Pollution Degree 2
Supplied with
GS38 test leads, carry pouch and instructions.
New items
K1021R, Kyoritsu
The Kyoritsu has large display with 6000 counts and backlight. It has enhanced current measuring function using an external clamp sensor. This product has two detachable holders, flat and wing type. Also it has accurate reading with true RMS safety standard.
Elegant and easy-to-use cabinet
Wing-type holder and flat-type holder
New items
K3132A, Kyoritsu
The Kyoritsu microprocessor controlled digital insulation tester. They not only permit insulation resistance measurement on three rated test voltage and continuity testing, but also offer a number of advanced feature such as a bargraph reading of insulation resistance, auto null function for continuity testing.
Live circuit warning buzzer and neon lamp
Small and lightweight
Shock resistant new case material
Easy-to-read scale
New items
K1051, Kyoritsu
The Kyoritsu multimeter has high accuracy, high performance and reliable measurements. TRMS measurement ensures accurate readings, avoiding errors which can occur when non-sinusoidal waveforms, created by common non linear loads such PCs, Inverters, switch-mode power supplies are measured.
Low-pass filter for motor drive measurements
User calibration function
Dual display
New items
K2117R, Kyoritsu
The Kyoritsu AC digital clamp meter has ergonomic over-molded body gives convenient one-hand operation. It has large easy-to-read display with 0.01 A resolution and long battery life.
Fully safety jaw
Accurate reading with True RMS
New items
KEW 8033, Kyoritsu
The Kyoritsu phase detector has voltage measurement range from 200 to 480 V. Phase order and open phase can be checked with both the LEDs and buzzer.
Work efficiency is improved by using the suction plate attached to the measurement code
New items
K2046R, Kyoritsu
The Kyoritsu clamp meter can be measure the voltage and current in both very high and low power circuit. Thus, it is very useful for power distribution companies, power utilize and maintenance fields. It has double molding gives comfortable feeling in palm.
True RMS enables an accurate measurement
6039 counts with bar graph display
New items
K6024PV, Kyoritsu
The Kyoritsu earth and insulation tester suitable for the photovoltaic panel market correct measuring for insulation resistance even if the panel is under generating power. It has waterproof design so can measure under the bad weather condition.
Memory function up to 1000 data
Luminescence button and backlight
New items
KEW8035, Kyoritsu
KEW8035 Non-contact Phase Rotation Tester
KEW8035 the first non-contact phase rotation tester. Safely test phase rotation without the need to expose live contacts. The unit requires no metal contact ideal for safer and faster testing. Super bright mode gives clear indication even in bright sunlight.
KEW8035 uses a combination of LED and audible tones to indicate phase direction. Green LEDs are used for clockwise direction with an intermittent tone. Red LEDs are used for anti clockwise direction with a continuous tone. The tester is suitable for a wide range of 3 phase installations from 70 V to 1000 V ac. It comes with a magnetised back for attachment to a metallic surface for hands-free testing.
Permits safe testing, without the need of direct contact between probes and live wires
Wide measuring range for 3 phase installations from 70 V → 1000 V ac
The insulated crocodile clips can clip insulated cables from Ø 2.4 mm → 30 mm
Double insulated cables, length approx. 70 cm
KEW8035 can be fixed to a metal panel via the magnet on the back
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
Complies with IEC61010-1 CAT.IV 600 V and CAT.III 1000 V
Supplied with
9096 (Carrying case), Alkaline battery (LR6)
´
4 and Instruction manual
New items
Don’t hesitate to ask questions for better clarification.