Rates
1+
£ 37.87
Products Found: 10
Showing Results For: Continuity Testers
Continuity Testers
FILTERS
Filters
Showing
1 -
New Items
New items
P01191611, Chauvin Arnoux
The Chauvin Arnoux CA 6011 continuity tester with built-in reeling box designed for your systematic earth bond continuity tests. It has large backlit display for easier measurement readings and compensation of the resistance of the measurement leads.
Comfortable use
Automatic polarity reversal
Management of the visual and audible indications
New items
TEK404, Martindale
Continuity Checkers TEK 402/TEK 404
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB buzzer makes it ideal for use in noisy environments where many continuity buzzers, multimeters or 17th Edition multi function testers cannot be heard.
TEK404 can be used for the same low voltage applications as the TEK402. But the TEK 404 is also suitable for use in CAT II and CAT III environments. There is an additional safety feature which pulses to alert the user when connected to live circuits >30 V ac. There is a convenient belt clip and the TEK404 is supplied with CATIII 600 V rated TL47 test leads.
Features and Benefits
Dimensions: 50 x 64 x 30 mm
Weight: approx. 260 g
Belt Clip: On rear face
Power Supply: 9 V, MN1604 / PP3 alkaline battery
TEK 402
Audible indication
Probe Voltage: 2.2 V dc
Test Current: < 50 μA across short circuit
Continuity Range (audible): 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resistance
Compliance: BS EN61010-2001, CAT I 50 V Peak. Not for use in CAT II, III or IV environments
TEK 404
Audible and visual indication, plus overvoltage protection
Probe Voltage: 2.2 V dc
Test Current: <50 μA across short circuit
Continuity Range: 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resistance
LED Indication: Bright Orange LED, buzzer and LED intensity reduce with increasing continuity resistance
Alarm Function: Pulsed buzzer and LED indication if unit is connected to live circuit voltage >30 V ac or >30 V dc +/- 20 V
Supplied with test leads (TL47), insulated crocodile clips and MN1604 battery
Ingress: IP40
Compliance: BS EN61010-2001, CAT III 600 V overvoltage
New items
TEK 404, Martindale
Continuity Checkers TEK 402/TEK 404
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB buzzer makes it ideal for use in noisy environments where many continuity buzzers, multimeters or 17th Edition multi function testers cannot be heard.
TEK404 can be used for the same low voltage applications as the TEK402. But the TEK 404 is also suitable for use in CAT II and CAT III environments. There is an additional safety feature which pulses to alert the user when connected to live circuits >30 V ac. There is a convenient belt clip and the TEK404 is supplied with CATIII 600 V rated TL47 test leads.
Features and Benefits
Dimensions: 50 x 64 x 30 mm
Weight: approx. 260 g
Belt Clip: On rear face
Power Supply: 9 V, MN1604 / PP3 alkaline battery
TEK 402
Audible indication
Probe Voltage: 2.2 V dc
Test Current:
Continuity Range (audible): 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resistance
Compliance: BS EN61010-2001, CAT I 50 V Peak. Not for use in CAT II, III or IV environments
TEK 404
Audible and visual indication, plus overvoltage protection
Probe Voltage: 2.2 V dc
Test Current:
Continuity Range: 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resis...
New items
45222, Wiha
The Wiha Tools continuity tester of voltage rating 400 V AC, electrical circuits and electrical consumers can be quickly and easily tested for continuity. In addition, the continuity tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit working environments. If the device is not in use for 30 seconds, it automatically switches off to save energy.
CAT II up to 600 V
IP 40 CE certified
New items
DX.V12APB, Facom
The Facom electric car tester is 100% automatic. It has 3-color screen for easy interpretation of values. Also it is shock resistant can detect bad contacts, measure direct current voltage up to 49 V and automatic detection of MLI / PWM signals.
Automatic power check
New items
45222, Wiha Tools
The Wiha Tools continuity tester of voltage rating 400 V AC, electrical circuits and electrical consumers can be quickly and easily tested for continuity. In addition, the continuity tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit working environments. If the device is not in use for 30 seconds, it automatically switches off to save energy.
CAT II up to 600 V
IP 40 CE certified
New items
P01299926, Chauvin Arnoux
The Chauvin Arnoux 6011 series continuity tester has been specially designed for periodic testing of the protective earth conductors of electrical equipment, appliances and installations, linked in particular to the standards and regulations.
Large backlit display (the largest on the market
4 buttons on the front panel to access all the functions directly
Long battery life: up to 30,000 measurements
New items
CA 6011, Chauvin Arnoux
The Chauvin Arnoux 6011 series continuity tester has been specially designed for periodic testing of the protective earth conductors of electrical equipment, appliances and installations, linked in particular to the standards and regulations.
Large backlit display (the largest on the market
4 buttons on the front panel to access all the functions directly
Long battery life: up to 30,000 measurements
New items
New items
RSTEK402, Martindale
Continuity Checkers TEK 402/TEK 404
TEK 402/404 are compact, versatile, battery powered instruments suitable for use in noisy environments. The tough construction makes it ideal for industrial and commercial environments including low voltage signalling, process control and training or educational applications. The loud 85 dB buzzer makes it ideal for use in noisy environments where many continuity buzzers, multimeters or 17th Edition multi function testers cannot be heard.
TEK404 can be used for the same low voltage applications as the TEK402. But the TEK 404 is also suitable for use in CAT II and CAT III environments. There is an additional safety feature which pulses to alert the user when connected to live circuits >30 V ac. There is a convenient belt clip and the TEK404 is supplied with CATIII 600 V rated TL47 test leads.
Features and Benefits
Dimensions: 50 x 64 x 30 mm
Weight: approx. 260 g
Belt Clip: On rear face
Power Supply: 9 V, MN1604 / PP3 alkaline battery
TEK 402
Audible indication
Probe Voltage: 2.2 V dc
Test Current:
Continuity Range (audible): 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resistance
Compliance: BS EN61010-2001, CAT I 50 V Peak. Not for use in CAT II, III or IV environments
TEK 404
Audible and visual indication, plus overvoltage protection
Probe Voltage: 2.2 V dc
Test Current:
Continuity Range: 2.2kΩ +/- 10%
Audible Output Level: 85 dB minimum at 30 cm with 0Ω continuity resis...