Rates
91+
£ 1.23
Products Found: 171
Showing Results For: Instrumentation Amplifiers
Instrumentation Amplifiers
Instrumentation devices, also called In-Amps are electronic amplifiers that are a type of precision gain block employed in electronic equipment and in equipment that is being used for measuring current power. Instrumentation works the same as a differential amplifier. This is an electronic device used to amplify the voltage difference between two inputs but mitigate voltage signals that are often available at two inputs. Enrgtech offers a range of instrumentation devices from various trusted brands in the industry, such as:
- Analog Devices
- Microchip
- Texas Instruments, and so on.
How do Instrumentation Circuits work?
Operational amplifiers (op-amps), along with several resistors, make up most instrumentation devices. They perform the most crucial part of CMR (common-mode rejection) by canceling out any signals that are received by both inputs and have the same potential. Signals with varying potentials are amplified. They are employed for low-frequency signals (like those at or below 1 MHz), which they amplify while also removing any potential common-mode noise from the incoming signal.
What are the Instrumentation Amplifiers used for?
- An instrumentation amplifier measures small signals in a noisy environment. The noise is generally "common-mode noise" (the difference between the noise-free common-mode voltage and the actual common-mode voltage). An instrumentation amplifier uses its common-mode rejection to distinguish the noise from the signal of interest.
- An instrumentation amplifier is used to measure small signals in a noisy or unfavorable environment. This noise generally exists in any mode.
- These devices are used to determine the noise-free common mode and voltage and the ideal common-mode voltage.
- Thus, this particular device is being widely employed in the industry to make it possible to distinguish the noise from the desired signal.
- Nearly every area of electronics requires instrumentation devices, but the test and measurement sector is important in particular.
- They function as a voltage follower, selective inversion circuit, active rectifier, integrator, a number of filters, and voltage comparator, among other things.
What are the typical applications of Instrumentation Amplifiers?
- Medical Equipment
- Test & Measurement of Industrial Equipment
- Data Acquisition
FILTERS
Filters
Showing
1 -
New Items
New items
LMP7712MM, Texas Instruments
Precision Operational Amplifiers, Texas Instruments
A range of precision operational amplifiers from Texas Instruments featuring low input offset voltage and low offset voltage drift with temperature. These devices exhibit stable and predictable operating characteristics which are essential in many demanding applications. CMOS and JFET input types also have extremely low input bias currents making them ideal for use in circuits where high values of resistance are required.
New items
LT1101SW#PBF, Linear Technology
Instrumentation Amplifiers, Linear Technology
Instrumentation amplifiers from
Linear Technology
offer a combination of differential inputs, high input impedance, and high precision and noise specifications. Linear Technology Instrumentation amplifiers also feature low-drift and excellent PSRR and CMRR.
Instrumentation Amplifiers, Linear Technology
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
New items
LTC1100CN8#PBF, Linear Technology
Instrumentation Amplifiers, Linear Technology
Instrumentation amplifiers from
Linear Technology
offer a combination of differential inputs, high input impedance, and high precision and noise specifications. Linear Technology Instrumentation amplifiers also feature low-drift and excellent PSRR and CMRR.
Instrumentation Amplifiers, Linear Technology
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
New items
AD8496CRMZ, Analog Devices
AD8494…AD8497 Thermocouple Amplifiers, Analog Devices
A range of dedicated thermocouple amplifiers from Analog Devices. These integrated devices incorporate precision instrumentation amplifiers and thermocouple cold junction compensation to provide a high level output directly from a type J or K thermocouples.
The following versions are available:
AD8494 for type J thermocouples, optimised operating temperature range 0°C to 50°C
AD8495 for type K thermocouples, optimised operating temperature range 0°C to 50°C
AD8496 for type J thermocouples, optimised operating temperature range 25°C to 100°C
AD8497 for type K thermocouples, optimised operating temperature range 25°C to 100°C
All versions have a measurement range equal to the full range of the relevant thermocouple type.
Low cost and easy to use
Can be used as a stand-alone 5 mV/°C thermometer
Pre-trimmed for J or K type thermocouples to 1°C initial accuracy
Wide power supply range: 2.7 to 36V or ±2.7 to ±18V
Internal cold junction compensation
High impedance differential inputs
Thermocouple break detection
Thermocouple Amplifiers
New items
MAX4460ESA+, Maxim
Instrumentation Amplifiers, Maxim Integrated
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.
Instrumentation Amplifiers, Maxim Integrated
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
New items
LTC1043CN#PBF, Linear Technology
Filter ICs, Linear Technology
Linear Technology
filter ICs present continuous time and switched capacitor filters that offer flexibility as well as being easy to use. The active filters can support low pass and a wide range of frequencies. They are suitable for use in Phased locked loop, smoothing filters, discrete RC active filter replacement and many more applications.
Supports Cutoff Frequencies up to 360 kHz
Operating from voltages up to 15V
Architectures: Proprietary, Switched Capacitor and Continuous Time
Forms to 2nd,4th,5th, 8th and 10th Order Low-pass Filters and Universal Filters
Available in a variety of Surface Mount (SMT) or through-hole packages
New items
AD8226ARMZ-R7, Analog Devices
Instrumentation Amplifiers, Analog Devices
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.
Instrumentation Amplifiers, Analog Devices
A range of Instrumentation Amplifiers from Analog Devices. This range of products also includes numerous evaluation and development boards.
New items
LTC6800HMS8#PBF, Analog Devices
Instrumentation Amplifiers, Linear Technology
Instrumentation amplifiers from
Linear Technology
offer a combination of differential inputs, high input impedance, and high precision and noise specifications. Linear Technology Instrumentation amplifiers also feature low-drift and excellent PSRR and CMRR.
Instrumentation Amplifiers, Linear Technology
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
New items
LT1167AIS8#PBF, Analog Devices
Instrumentation Amplifiers, Linear Technology
Instrumentation amplifiers from
Linear Technology
offer a combination of differential inputs, high input impedance, and high precision and noise specifications. Linear Technology Instrumentation amplifiers also feature low-drift and excellent PSRR and CMRR.
Instrumentation Amplifiers, Linear Technology
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
New items
AD8227ARMZ, Analog Devices
Instrumentation Amplifiers, Analog Devices
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.
Instrumentation Amplifiers, Analog Devices
A range of Instrumentation Amplifiers from Analog Devices. This range of products also includes numerous evaluation and development boards.
New items
AD8227BRZ, Analog Devices
Instrumentation Amplifiers, Analog Devices
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.
Instrumentation Amplifiers, Analog Devices
A range of Instrumentation Amplifiers from Analog Devices. This range of products also includes numerous evaluation and development boards.
New items
AD8426ACPZ-WP, Analog Devices
Instrumentation Amplifiers, Dual, Analog Devices
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals (AC power line frequency) are present.
Instrumentation Amplifiers, Analog Devices
A range of Instrumentation Amplifiers from Analog Devices. This range of products also includes numerous evaluation and development boards.