Electro-pneumatic servo distributors
Compact, single unit assemblies including solenoid valve, electronic regulator, and pressure sensor.
Pipe diameters are equivalent at the incoming and outgoing points, ensuring very short response times both increasing and reducing pressure.
The guide value is compared and adjusted in real time with the outgoing pressure: closed-loop regulation.
The conjugated action of these elements leads to functioning with very low hysteresis.
Fluids:
filtered air or neutral gas 50 μm, without condensate, lubricated or not
Max. pressure torque:
12 bar (60100048 and 60100002)
8 bar (60100003)
Regulation field:
0 to 10 bar (60100048 and 60100002)
0 to 3 bar (60100003)
Operating temperature:
0 to +60°C (fluid)
0 to +40°C (ambient)
Rate at 6 bar:
210 Nl/minute (G1/8), 700 Nl/minute (G1/4)
Analogue load:
0 to 10 V (sensitivity
Hysteresis:
Linearity:
Reproducibility:
Minimum load:
50 ±20 mV (0.1 mA) with closure function
Constant stabilised voltage:
24 Vdc ±10%
Max. power:
15 W (G1/8), 29 W (G1/4)
Max. current:
600 mA (G1/8), 1200 mA (G1/4)
Connection:
7-pin DIN 43651 connector
Protection level:
IP 65