Products Found: 8
Showing Results For: Processing Chemicals
Processing Chemicals
FILTERS
Filters
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Fortex
RS_567-812, Fortex
7 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 107.82
CRC
82009, CRC
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 14.05
Mega Electronics
600-006, Mega Electronics
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.22
Mega Electronics
600-014, Mega Electronics
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 32.13
Sunhayato
DP-50, Sunhayato
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 3.07
CIF
AT521, CIF
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 13.61
Mega Electronics
600-004, Mega Electronics
Pre Order
Check Stock & Lead Times Packaging Options
CIF
AR4122, CIF
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 25.73
10 +
£ 21.87
25 +
£ 19.30
Showing
1 -
New Items
New items
600-006, Mega Electronics
PCB Preparation Seno Chemical Applicators
Three applicators each containing safe, ready-to-use PCB chemistry, which offers a clean and efficient alternative to processing in trays
Each applicator is sealed with a valve mechanism terminated by a sponge which dispenses precisely the right amount on the board
All applicators work at room temperature, are waste free, and when exhausted can be disposed of without any special precautions
363-6517
SN110 (Universal Developer):
Applicator which
develops
all alkaline positive working resists. Contains 50ml of developer sufficient to process approximately 40 standard Eurocards (100 x 160mm)
363-6523
SN120 (Resist Strip):
Applicator which quickly removes
(strips)
all remaining
Photoresist
from etched boards. Contains 80ml of resist-strip sufficient to process approximately 30 standard Eurocards (100 x 160mm)
363-6539
SN140 (Flux):
Applicator which applies a protective lacquer to a clean etched circuit, preventing any further oxidation. Lacquer also acts as an excellent solder
flux
. Contains approximately 80ml of flux sufficient to process aproximately 70 standard Eurocards (100 x 160mm)
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
New items
RS_567-812, Fortex
Tin-Plating Crystals
These crystals produce a bright plated finish PCB track and other copper alloys. The plating provides a highly solderable keying surface. Deposition rates of tin to tin of 1.5 to 2.0 microns in the first half hour and 3 to 4 microns in up to 2 hours can be achieved at an optimum room temperature. 5 litres of solution can be made by dissolving the crystals in water at 50°C, which is sufficient to cover 2.7m
2
of board. Instruction leaflet supplied.
Solid form
Colourless
Odourless
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
Warning
Always wear suitable protective gloves and faceshield when handling.
New items
600-004, Mega Electronics
PCB Preparation Seno Chemical Applicators
Three applicators each containing safe, ready-to-use PCB chemistry, which offers a clean and efficient alternative to processing in trays
Each applicator is sealed with a valve mechanism terminated by a sponge which dispenses precisely the right amount on the board
All applicators work at room temperature, are waste free, and when exhausted can be disposed of without any special precautions
363-6517
SN110 (Universal Developer):
Applicator which
develops
all alkaline positive working resists. Contains 50ml of developer sufficient to process approximately 40 standard Eurocards (100 x 160mm)
363-6523
SN120 (Resist Strip):
Applicator which quickly removes
(strips)
all remaining
Photoresist
from etched boards. Contains 80ml of resist-strip sufficient to process approximately 30 standard Eurocards (100 x 160mm)
363-6539
SN140 (Flux):
Applicator which applies a protective lacquer to a clean etched circuit, preventing any further oxidation. Lacquer also acts as an excellent solder
flux
. Contains approximately 80ml of flux sufficient to process aproximately 70 standard Eurocards (100 x 160mm)
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
New items
600-014, Mega Electronics
PCB Preparation Fine Etch Crystals
An effective alternative to Ferric Chloride, this etchant eliminates the staining and mess caused by traditional etchants
The mixed solution remains odourless and any splashes or drips can be wiped away with a damp cloth, preventing staining
6-8 minute etching times at 50°C should be expected with fresh solution
4-6 week life expected in tank (can be increased by adding a little more powder to exhausted solution)
Supplied in 1kg powder bag sufficient to make 5 litres of etching solution
Based on a Sodium Persulphate and Stabiliser formula
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
Warning
This is a hazardous product. It may intensify fire. It is harmful if swallowed. It can cause: serious eye irritation; allergy or asthma symptoms or breathing difficulties if inhaled; an allergic skin reaction.
New items
82009, CRC
KONTAKT POSITIV 20 - positive photo-sensitive lacquer
Positive photo-sensitive lacquer for manufacturing printed circuit boards, with clear copper tracks laminated onto epoxy FR4 or Bakelite.
Positive work: can be used with a Mylar transparent film or a single traced design; the printed circuit diagram is always the image of the original positive.
Blue sensitive layer is resistant to etching agents when not insulated.
Perfectly uniform, even layer.
Colour:
Light blue
Density at 20 °C:
0.78 g / cm3
Lacquer flashpoint (without propellant):
21 °C
Recommended thickness:
6 → 8 microns
Coverage:
approx. 0.75 m2 per aerosol spray
Drying time:
15 min. at 70 °C (recommended) or 24 hours at 20 °C
Required source of radiation:
Ultraviolet light sensitive within 340 nm to 440 nm zone
Capacity:
270 ml gross - 200 ml net
New items
DP-50, Sunhayato
Developing Agent for Photosensitive Boards
Power-type developer for developing positive photosensitive boards after exposure to light
Comparison table
Part name
Development guide
NET
DP-10
Single-side 100
´
150 mm, approx. 3 pcs
10 g (for 200 cc)
DP-50
Single-side 100
´
150 mm, approx. 15 pcs
50 g (for 1000 cc)
New items
AR4122, CIF
Ferric Chloride
Granulated ferric chloride pellets, for making up volumes of 2 litres
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.
New items
AT521, CIF
Coating Resin
Coating resin providing protection for printed circuits
Can be used to keep component design secret
Allows moulding at ambient temperature with cold polymerisation
Kit comprises 2 parts: Resin and Hardener totalling 250g
Density: 1.35
Dielectric strength: 350KV/cm
Hardening : 4 to 9 h at 25°C
Temperature range: -50°C to +120°C
Processing Chemicals
Suitable for use with the RS PCB tanks, these processing chemicals are supplied conveniently packaged to make up sufficient working solution for one tank fill. Instructions for the use of these chemicals are printed on the package, and are repeated in the instruction leaflet supplied with all tanks in the range.