Featured Products
Moflash Industrial ECO LED Beacons - LEDD100 Series The LEDD100 economy series are suitable for light commercial & industrial signalling applica...
E-flare Portable LED Beacon Portable obstacle warning device (hazardous ATEX and non-hazardous approved ver...
Moflash A6BM / A8BM Solenoid Driven Bell The Moflash A6BM and A8BM solenoid driven bells have been designed...
Moflash Industrial ECO LED Beacons - LED100 Series The LED100 economy series is suitable for light commerci...
Moflash Industrial ECO LED Beacons - LEDD100 Series The LEDD100 economy series are suitable for light comme...
Moflash Industrial ECO LED Beacons - LED100 Series The LED100 economy series is suitable for light commerci...
Moflash Dual Function LED Beacon - LED80 Series 12 extra-bright LED's Continuously-rated UV-stable polycarb...
Explosion Proof Sounder, SD125 & SD150 Series These electronic sounders have been approved for use in potentially explosive atmospheres, hazardo...
Xenon, DIN Base - X125 Series Suitable for fire, security, materials handling and light industrial applicat...
XA125 Sounder / Xenon Beacon The XA125 DIN Base Sounder / Beacon utilises a discharge capacitor and converter circu...
Xenon, DIN Base - X125 Series Suitable for fire, security, materials handling and light industrial applicat...
Moflash Industrial ECO LED Beacons with Piezo Buzzer - LEDA100 Series The LEDA100 economy series incorporat...
Popular Categories For Moflash
Popular Items
Popular items
LEDD100-01-02, Moflash
Moflash Industrial ECO LED Beacons - LEDD100 Series
The LEDD100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDD beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
3 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
Popular items
50173, Moflash
E-flare Portable LED Beacon
Portable obstacle warning device (hazardous ATEX and non-hazardous approved versions) providing a quick and easy method to enhance safety by creating a highly visible warning zone. Impact resistant ABS body and cap, and shatterproof polycarbonate lens designed to survive a drop from 1m high onto a concrete surface.
Long life LED
Shock resistant
High luminosity
360° visibility
Visible for 1km at night
IP66 waterproof protection
Activated on and off by turning the head of the unit
Accessories available include: Magnetic or free standing bases, hood, suction cup and flotation collar
Note
Double handle version takes 2 x D cell alkaline batteries offering up to 40 hours life. Single handle version takes 4 x AA cell alkaline batteries offering up to 30 hours life. Batteries not included.
Popular items
A8BM-24DC, Moflash
Moflash A6BM / A8BM Solenoid Driven Bell
The Moflash A6BM and A8BM solenoid driven bells have been designed and manufactured to withstand harsh environmental conditions. They are ideally suited to heavy duty industrial & marine applications where rugged construction and a high weatherproof classification is required. The bells produce a rich and clear traditional sound that is free from mechanical clatter. Up to 4 x M20 cabling entry knockouts, two from above and one on either side allow for loop in/loop out cabling applications. The A6BM and A8BM caters for 4 x 2.5mm
2
termination inside the enclosure.
3 point fix with adjustment slots
Dustproof and weatherproof
Loop in & loop out cabling option
IP66 protection
106 dB or 108 dB
Duty cycle: max 10 mins ON, 30 mins OFF
AC supply 50/60 Hz
UV stable polypropelene back box
Zinc powder coated steel gong
RoHS compliant
Approvals
IEC 60533:1999 approved for installation on ships.
AEN 50130-4:2011 approved for Fire/Security.
Bell
Popular items
LED100-01-01, Moflash
Moflash Industrial ECO LED Beacons - LED100 Series
The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LED beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
Optional wall bracket & guard available
2 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE marked
Popular items
LEDD100-05-04, Moflash
Moflash Industrial ECO LED Beacons - LEDD100 Series
The LEDD100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDD beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
3 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
Popular items
LED100-05-04, Moflash
Moflash Industrial ECO LED Beacons - LED100 Series
The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LED beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
Optional wall bracket & guard available
2 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE marked
Popular items
LED80-02-04, Moflash
Moflash Dual Function LED Beacon - LED80 Series
12 extra-bright LED's
Continuously-rated
UV-stable polycarbonate lens and body
Wide operating voltage
180° visibility
Easy, snap-fit installation (with base plate for surface mounbt option)
May be used in genaral signalling applications
Popular items
SD150DCNNARDN, Moflash
Explosion Proof Sounder, SD125 & SD150 Series
These electronic sounders have been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
The sounder incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
The design of these alarm sounders allow for termination inside the enclosure. Both the SD125 & SD150 are supplied with a stainless steel mounting bracket as standard.
3 stage alarm with 63 selectable tones
5-20 watts adjustable power rating
Sound output up to 115dB at 1 metre
Volume control
Dustproof and weatherproof
Red (RAL3001)
316 stainless steel or GRP (Glass Reinforced Plastic) enclosure
IP66 / IP67 protection
Temperature -40 to +70°C
Accepts upto ≤2.5mm
2
incorporating rising clamp protectors
Cable entry 4 x M20
RoHS compliant and CE marked
Approvals
Approved by ATEX and CQST
, IMETRO and IECEX (pending)
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22 (pending)
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.
Hazardous Area
Popular items
X125-64, Moflash
Xenon, DIN Base - X125 Series
Suitable for fire, security, materials handling and light industrial applications
Bright xenon signal
Low current consumption
Note
Lens is not supplied and must be ordered separately (Essential accessory lenses include: Red
698-7215
Amber
698-7219
Blue
698-7221
Green
698-7228
Clear
698-7225
)
Popular items
XA125-63, Moflash
XA125 Sounder / Xenon Beacon
The XA125 DIN Base Sounder / Beacon utilises a discharge capacitor and converter circuit to ignite Xenon gas inside a tube, resulting in 3 joules of flash energy yet with the advantage of low current consumption. Two Piezo sounders located in the base of the unit offer either a continuous or pulsed tone which can operate independently of the beacon.
Combined audible and visual signal
3 joules of flash energy
2 Piezo sounders, 90 dB
Continuously rated
360° visibility
3 point fixing
UV stable polycarbonate lens and ABS base
IP65 protection
RoHS compliant
CE marking
Note
The lenses are supplied seperately, as follows:
698-7221
blue,
698-7225
clear,
698-7215
red,
698-7228
green and
698-7219
amber.
Xenon Strobe/Electronic
Popular items
X125-62, Moflash
Xenon, DIN Base - X125 Series
Suitable for fire, security, materials handling and light industrial applications
Bright xenon signal
Low current consumption
Note
Lens is not supplied and must be ordered separately (Essential accessory lenses include: Red
698-7215
Amber
698-7219
Blue
698-7221
Green
698-7228
Clear
698-7225
)
Popular items
LEDA100-05-01, Moflash
Moflash Industrial ECO LED Beacons with Piezo Buzzer - LEDA100 Series
The LEDA100 economy series incorporate a piezo buzzer, situated in the base of the unit, that is synchronised to the flash rate offering a combined audible & visual warning signal (Note: the buzzer cannot be controlled independently of the light).
These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDA beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
80 dB piezo buzzer which only activates with the flashing mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
3 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
LED/Buzzer
New Items
New items
LEDD100-01-02, Moflash
Moflash Industrial ECO LED Beacons - LEDD100 Series
The LEDD100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDD beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
The design allows for termination inside the enclosure through the base.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
3 point fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
New items
SD125ACNNARDN, Moflash
Explosion Proof Sounder, SD125 & SD150 Series
These electronic sounders have been approved for use in potentially explosive atmospheres, hazardous areas and very harsh environmental conditions.
Typical applications are Oil and Gas, On-shore & Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
The sounder incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
The design of these alarm sounders allow for termination inside the enclosure. Both the SD125 & SD150 are supplied with a stainless steel mounting bracket as standard.
3 stage alarm with 63 selectable tones
5-20 watts adjustable power rating
Sound output up to 115dB at 1 metre
Volume control
Dustproof and weatherproof
Red (RAL3001)
316 stainless steel or GRP (Glass Reinforced Plastic) enclosure
IP66 / IP67 protection
Temperature -40 to +70°C
Accepts upto ≤2.5mm
2
incorporating rising clamp protectors
Cable entry 4 x M20
RoHS compliant and CE marked
Approvals
Approved by ATEX and CQST
, IMETRO and IECEX (pending)
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1 & 2, zones 21 & 22 (pending)
Standards
Conforms to EN (IEC) 60079-0, EN (IEC) 60079-1 and EN54.
Hazardous Area
New items
XA125-63, Moflash
XA125 Sounder / Xenon Beacon
The XA125 DIN Base Sounder / Beacon utilises a discharge capacitor and converter circuit to ignite Xenon gas inside a tube, resulting in 3 joules of flash energy yet with the advantage of low current consumption. Two Piezo sounders located in the base of the unit offer either a continuous or pulsed tone which can operate independently of the beacon.
Combined audible and visual signal
3 joules of flash energy
2 Piezo sounders, 90 dB
Continuously rated
360° visibility
3 point fixing
UV stable polycarbonate lens and ABS base
IP65 protection
RoHS compliant
CE marking
Note
The lenses are supplied seperately, as follows:
698-7221
blue,
698-7225
clear,
698-7215
red,
698-7228
green and
698-7219
amber.
Xenon Strobe/Electronic
New items
50176, Moflash
E-flare Portable LED Beacon
Portable obstacle warning device (hazardous ATEX and non-hazardous approved versions) providing a quick and easy method to enhance safety by creating a highly visible warning zone. Impact resistant ABS body and cap, and shatterproof polycarbonate lens designed to survive a drop from 1m high onto a concrete surface.
Long life LED
Shock resistant
High luminosity
360° visibility
Visible for 1km at night
IP66 waterproof protection
Activated on and off by turning the head of the unit
Accessories available include: Magnetic or free standing bases, hood, suction cup and flotation collar
Note
Double handle version takes 2 x D cell alkaline batteries offering up to 40 hours life. Single handle version takes 4 x AA cell alkaline batteries offering up to 30 hours life. Batteries not included.
New items
LEDS100-05-02, Moflash
Moflash Industrial ECO LED Beacon - LEDS100 Series
The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.
The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.
This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.
Dual function, flashing or continuous (static) mode
Continuously rated
LED long life
Low current consumption
Suitable for surface, conduit box or wall mounting
2 stud fixing
360° light output around the vertical axis
Dustproof and weatherproof
UV stable polycarbonate lens
UV stable ABS plastic base
160 flashes per minute (FPM)
IP65 protection
RoHS compliant
CE Marked
New items
JB15010ARD, Moflash
Moflash IP66 Explosion Proof Junction Boxes
The Moflash JB125 and JB150 junction boxes have been approved for use in potentially explosive atmospheres and harsh environmental conditions. They are suitable for applications such as Oil and Gas, On-shore and Offshore, Chemical, Petrochemical, Refineries & Marine locations, etc.
The junction boxes are machined from marine grade 316 stainless steel or glass reinforced plastic (GRP), and are supplied with four pre-drilled conduit entries.
The JB125 and JB150 have been designed to offer maximum space for cable termination with a choice of either an 8 or 10 way terminal block.
Approved by ATEX, IECEx
ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB)
Zones 1, 2, 21 & 22
Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54
Dustproof & weatherproof
IP66 protection
Stainless steel or GRP
RoHS compliant
New items
LED195-01WH-01, Moflash
Moflash Industrial LED Beacon - LED195 Series
Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.
Continuously rated
LED long life
Low current consumption
Dustproof
Weatherproof
Cable termination inside the enclosure
Deep or Shallow base options
New items
LED195-02WH-04, Moflash
Moflash Industrial LED Beacon - LED195 Series
Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.
Continuously rated
LED long life
Low current consumption
Dustproof
Weatherproof
Cable termination inside the enclosure
Deep or Shallow base options
New items
LED-TL-01-02-04, Moflash
Moflash Industrial LED Traffic Light - TL Series
Professional range of Moflash industrial LED beacons from the TL series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solution are required. Suitable applications include car park management, factory traffic control, automatic gate or door control systems. The beacons require external input signals or PLC controls to switch visual indication functions. Suitable for indoor or outdoor applications. The beacons can be surface mounted onto any flat vertical surface or conduit boxes.
Continuously rated
IP65 Rated
LED long life
Low current consumption
Dustproof
Weatherproof
Cable termination inside the enclosure
New items
X195-05WH-04, Moflash
X195 Xenon
The X195 offers a low current consumption with a brilliant flash.
Suitable for surface or wall mounting
Suitable for use with conduit BESA box
M20 side entry (deep base) or bottom cable entry
IP65 rating
Polycarbonate lens and ABS plastic base
New items
X700-22-05, Moflash
Xenon Beacon - X700 Series
Professional range of xenon beacons from the X700 synchronous series. The beacons are designed to work both independently or as part of a synchronised string of beacons. Suitable for industrial and marine signalling applications.
Features and Benefits
IP66/67 rated
Surface Mount or Wall Mount
Polycarbonate lens and base
Continuously rated
New items
LED195-05WH-03, Moflash
Moflash Industrial LED Beacon - LED195 Series
Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.
Continuously rated
LED long life
Low current consumption
Dustproof
Weatherproof
Cable termination inside the enclosure
Deep or Shallow base options
Don’t hesitate to ask questions for better clarification.