Emergency Lighting Kits
Ideal for integrating into existing control gear. Supplied with a fused terminal block and pre-cut connection wires.,The modules can be tuned specifically to the lamp, giving better performance for the cell capacity.
Lamp compatibility/Ballast Lumen Factor
Stock No.
T5
T8
2-D
PL-L
PL-C
PL-S
466-3330
4 / 0.59
15 / 0.32
21 / 0.29
18 / 0.33
18 / 0.28
5 @ 0.46
6 / 0.62
18 / 0.32
28 / 0.21
24 / 0.19
26 / 0.23
7 @ 0.56
8 / 0.62
30 / 0.15
38 / 0.18
34 / 0.17
-
9 @ 0.44
13 / 0.30
36 / 0.15
-
36 / 0.18
-
11 @ 0.47
14 / 0.25
-
-
-
-
-
21 / 0.25
-
-
-
-
-
22 / 0.18
-
-
-
-
-
466-3346
n/a
70 / 0.09
n/a
n/a
n/a
n/a
Note: Wattage/Ballast Lumen Factor shown for applicable lamp sizes
Lamp compatibility/Ballast Lumen Factor
Stock No.
T8
466-3346
70/0.09
Note: Wattage/Ballast Lumen Factor shown for applicable lamp size
Note
Nominal tube diameter - T5=16mm, T8=26mm, T12=38mm
Conversion Kits
Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.
