What are the shipping charges for products like FPGA Development Tools?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

Where are your products like FPGA Development Tools manufactured?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like FPGA Development Tools?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

How long will it take to receive the order that I placed for FPGA Development Tools?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

Are your products FPGA Development Tools in stock?

Yes. We keep updating our stock frequently and if a product like FPGA Development Tools is not in stock then we will let you know.

FPGA Development Tools | Fpga Development Board | Fpga Board

New items

410-183, Digilent

Basys 3 Artix-7 FPGA Trainer Board The Basys 3 is an entry-level FPGA development board designed for the Vivado Design Suite, featuring Xilinx Artix-7 architecture. Vivado Design Suite WebPACK edition can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) On-board 32Mbit Quad-SPI Serial Flash memory Programmable over JTAG, Quad-SPI or USB USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector FPGA Programming-Done LED 16 x User LEDs 4-digit 7-segment LED display 5 x User Pushbuttons 16 x User Slide-Switches 3 x Standard Pmod 2 x 6-pin connectors Dual purpose XADC signal / Standard Pmod 2 x 6-pin connector Powered from either USB socket or external +5V header An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

DK-DEV-10M50-A, Altera

MAX 10 FPGA Development Kit, Altera The Altera MAX 10 FPGA development kit is a full featured design platform built around a 50 K logic elements (LEs). It is optimised for system level integration with on-die ADC, dual-configuration flash, and DDR3 memory interface support. It has a range of connectivity options including an on-board USB-Blaster II, HDMI output, and dual Ethernet for industrial Ethernet applications. The MAX 10 FPGA Development Kit provides a system-level prototyping solution for industrial, automotive and consumer applications. With the Altera MAX 10 FPGA Development Kit, you can: - Develop designs for the 10M50D, F484 package FPGA - Measure the performance of the MAX 10 FPGA ADC block conversion - Interface MAX 10 FPGAs to DDR3 memory at 300 MHz performance - Run embedded Linux using the Nios II processor - Interface to daughter cards and peripherals using HSMC and Digilent Pmod Compatible connectors - Measure FPGA power using the power monitor graphical user interface (GUI) - Reuse the PCB board and schematic as a model for your design Programming and Configuration - Embedded USB-Blaster II (JTAG) - Optional JTAG direct via 10-pin header Memory Devices - 64-Mx16 1 GB DDR3 SDRAM with soft memory controller - 128-Mx8 1 GB DDR3 SDRAM with soft memory controller - 512 MB Quad serial peripheral interface (quad SPI) flash Communication Ports - 2 x Gigabit Ethernet RJ-45 ports - mini-USB2.0 UART - HDMI video output - Universal high-speed mezzanine card (HSMC) connector - 2 x 12-pin Digilent Pmod compatible connectors Analogue - 2 x MAX 10 FPGA ADC SMA inputs - 2 x 10 ADC header - Potentiometer input to ADC - External 16-bit DAC with SMA output Clocking - 25 MHz single-ended, external oscillator clock source - Silicon labs clock generator Supplied with - Mini USB cable for on-board USB-Blaster II - 2A Power Supply and cable - Free Quartus II Web Edition design software Featu...

Product Detail

New items

360-076, Digilent

The Digilent Trenz TE0802 is a development board integrating a Xilinx Zynq UltraScale+ MPSoC device. The board features SDRAM DDR4 8GB memory, multiple connectivity interfaces, including DisplayPort, VGA, USB 3.0, and Gigabit Ethernet RJ45. The versatile onboard I/O, including push buttons, slide switches, a seven-segment LED display, and 12-pin Pmod connectors, provide everything you need in one convenient package. It can be used in Sensor Fusion, IoT, Motor Control applications

Product Detail

New items

MAX14906EVKIT#, Maxim Integrated

EVAL BOARD FOR MAX14906

Product Detail

New items

471-036-2, Digilent

The Digilent The Eclipse Z7 Zynq-7000 SoC development board with SYZYGY-compatible expansion is Digilent's newest FPGA/SoC designed to enable systems that are ultra high-speed and highly modular, featuring Xilinx's Zynq-7000 PSoC. Zynq, plus the Zmod expansions and Digilent's new software architecture results in a powerful research and prototyping platform optimized for productivity and accelerated design flow, making it the perfect product for instrumentation applications such as software defined radio, ultrasound, medical technology, and much more. MicroSD card slot Power jack

Product Detail

New items

410-328-35, Digilent

Cmod A7 Artix-7 FPGA DIP Module The Digilent Cmod A7 is a small 48-pin DIP form factor development board built around a Xilinx Artix-7 FPGA. Ideal for use with solderless breadboards. Xilinx Artix-7 FPGA (XC7A35T-1CPG236C) 33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 1800Kbit Fast Block RAM 5 x Clock Management Tiles, each with a phase-locked loop (PLL) 90 x DSP slices Internal clock speeds exceeding 450MHz On-board IS61WV5128BLL-10BLI 512KB SRAM On-board N25Q032A 4MB Quad-SPI Flash memory MicroUSB connector USB-JTAG Programming Circuit On-board FT2232HQ USB-UART Bridge 2 x User LEDs User RGB LED 2 x User Pushbuttons 48-pin DIP connector with 44 x GPIO and 2 x Analogue inputs Standard Pmod 2 x 6-pin connector Power supply: USB or external +3.3V to +5.5Vdc connected to DIP pins An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

410-292 Nexys A7-100T, Digilent

Nexys 4 DDR Artix-7 FPGA Trainer Board The Nexys 4 is an FPGA development board designed for the educational market, featuring Xilinx Artix-7 architecture. The Nexys 4 DDR is compatible with the high-performance Vivado Design Suite as well as the ISE® toolset, which includes ChipScope™ and EDK. WebPACK editions of these toolsets can be downloaded for free from Xilinx. Expanded features are available through purchase of the Design Edition. Xilinx Artix-7 FPGA (XC7A100T-1CSG324C) Features 101440 logic cells in 15850 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops) 4860Kbit Fast Block RAM 6 x Clock Management Tiles, each with a phase-locked loop (PLL) 240 x DSP slices Internal clock speeds exceeding 450MHz On-chip Analogue-to-Digital Converter (XADC) Nexys 4 DDR Board Features MT47H64M16HR-25 128MiB DDR2 SDRAM S25FL128S 16MiB Quad-SPI Serial Flash memory ADXL362 SPI bus 3-axis accelerometer ADT7420 I²C bus temperature sensor ADMP421 MEMS microphone with PDM output Programmable over JTAG, Quad-SPI or USB FPGA Programming-Done LED 2 x 4-digit 7-segment LED displays 16 x User LEDs 2 x User RGB LEDs 5 x User Pushbuttons 16 x User Slide-Switches USB-UART Bridge via microUSB socket USB-A HID Host socket for mice, keyboards and memory sticks 12-bit VGA display output on DE15 connector RJ45 socket for 10/100 Ethernet connection 3.5mm jack socket for mono audio output microSD card slot 4 x Standard Pmod™ 2 x 6-pin connectors Analogue XADC Pmod™ 2 x 6-pin connector Powered from either USB, barrel jack socket or external battery pack Supplied with Hardshell plastic case with protective foam, USB cable An FPGA i...

Product Detail

New items

DK-DEV-5AGTD7N, Altera

ARRIA V DEVELOPMENT KIT

Product Detail

New items

471-014, Digilent

The Zybo Z7 is a feature-rich, ready-to-use embedded software and digital circuit development board built around the Xilinx Zynq-7000 family. This is the second generation update to the popular Zybo that was released in 2012. The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. The Zybo Z7 surrounds the Zynq with a rich set of multimedia and connectivity peripherals to create a formidable single-board computer, even before considering the flexibility and power added by the FPGA.

Product Detail

New items

iCE40LP1K-BLINK-EVN, Lattice Semiconductor

Lattice iCEblink40-LP1K Evaluation Kit A low-cost platform for evaluating and developing with the low-power iCE40LP1K FPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40LP1K FPGA. The free iCEcube2™ development tool controls programming, accesses virtual I/O functions and runs the included demos. The tools can be downloaded from the Lattice website. Low-power, small-footprint iCE40LP1K FPGA in 84-pin QFNS package USB programming, debugging, virtual I/O functions, and power supply 4 x User LEDs 4 x Capacitive-touch buttons 3.3MHz clock source 1Mbit SPI serial configuration PROM Supported by Lattice iCEcube2 design software 63 x LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1in through-hole connections Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied) Supplied with USB cable for power & programming, QuickStart Guide An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Product Detail

New items

410-376, Digilent

Product Detail

New items

410-393, Digilent

The Eclypse Z7 is Digilent's newest FPGA/SoC designed to enable systems that are ultra high-speed and highly modular, featuring a Xilinx Zynq®-7000 SoC family device. Zynq, plus the Zmod expansions and Digilent's new software architecture results in a powerful research and prototyping platform optimized for productivity and accelerated design flow, making it the perfect product for instrumentation applications such as software defined radio, ultrasound, medical technology, and much more. As a host board for Zmods, the open-source SYZYGY-compliant expansion modules, Eclypse Z7 is designed to be highly flexible without the overhead of starting designs from scratch. Users can get started with the Eclypse Z7 immediately as Petalinux is supported right out of the box. Pre-built Linux images are accompanied by a software API for bulk data transfer. Digilent offers fully open and customizable hardware designs, Linux images, and Linux software applications. Zynq 7020 SoC667 MHz dual core ARM Cortex-A9 processor13,300 logic slices1GB DDR3L with 32-bit bus @ 1866 MHz2x SYZYGY standard interface connectors for Zmod expansionStandard supports data rates of up to 500 MHz2x Pmod connectors for Pmod expansionMicro USB port for USBUART and JTAG programmingJTAG programming headerProgramming mode select jumper: JTAG, QSPI, SDEthernet connector with 10/100/1000 Ethernet PHYMAC address loaded into QSPI flash during manufacturingMicro USB connector for user USB Host/Device/OTGMicroSD card slotPower jack12V, up to 5A2x user RGB LEDs125 MHz oscillator connected to Zynq PL for PL-only designs2x user buttons

Product Detail