Rates
1+
£ 171.67
Products Found: 337
Showing Results For: Surge Protection Devices
Surge Protection Devices
FILTERS
Filters
Showing
1 -
New Items
New items
2909636, Phoenix Contact
The Phoenix Contact type 2 surge protection plug has optical and mechanical status indicator. It is a high-performance gas-filled surge arrester for N/PE protection.
Pluggable
Free of leakage current
New items
2907387, Phoenix Contact
The Phoenix Contact combination type 1/2 protective device has optical and mechanical status indicator. It comes with floating remote indication contact.
Pluggable
High continuous voltage
New items
1069191, Phoenix Contact
The Phoenix Contact sensor is a pulse measuring device sensor for the real-time recording of surge currents and transient overvoltage.
It is designed for use in combination with the Impulse Check evaluation unit
New items
SG2DGK10M3R, Lovato
The Lovato product is a type 2 surge protection device with plug in cartridge for photovoltaic applications. It is suitable for installation on the direct current end of a photovoltaic installation and protects against induced overvoltage conditions.
Single module status indicator
Versions with or without output for remote status indication
Tested according to EN/BS 50539-11
IEC degree of protection is IP20
New items
1077106, Phoenix Contact
The Phoenix Contact Surge protection device use for security and protection against unexpected surges and disturbances to analog and digital telecommunications interfaces. It is space saving and inexpensive with a narrow overall width of just 6.2 mm. It has integrated overload protection.
Quick and tool-free installation
Safe behaviour in the event of overload with integrated short-circuit mechanism and electronic current limiter
New items
2404843, Phoenix Contact
The Phoenix Contact string combiner box for photovoltaic systems up to 1000 V DC for connecting 6x 1 string and has push-in connection method for input/output side.
Polycarbonate material housing
New items
1351650000, Weidmüller
The Weidmuller Type III surge protection compact type III arrester for AC/DC protection acc. to IEC 61643-11:2012 suitable for protecting terminals installed in the vicinity of the equipment to be protected can be used as single-port arrester when nominal current is greater than 16 A.
Arrestor serves as surge protection and is used in application in accordance with IEC 61643-12
If there is no longer any protection, the colour of the LEDs changes from green to red
New items
MLLS05K-277V-S, MTL
The MTL Surge Technologies LS05K series range of surge protection devices are versatile, high performance surge protection devices which can be used within a wide variety of equipment in industrial and commercial applications. The circuitry will protect equipment from damaging electrical transients and disturbances. The space saving footprint allows the range to be mounted in confined locations whilst providing protection the Line/Neutral, Line/Ground, and Neutral/Ground modes. A high performance to size ratio is provided utilizing a Thermally Protected Metal Oxide Varistor (TP-MOV) together with a state of the art failure disconnect network giving added peace of mind.
10kA surge protection per mode
Protects LED lighting systems and drivers
Space saving footprint for mounting in confined locations
Protects 120V-277V,347V & 440-480V systems
High performance to size ratio and fully automatic operation
New items
5SY1702-2, Siemens
The Siemens device circuit breaker having 1-pole with auxiliary switch NO contact characteristic, the mechanical life is 6000 cycles.
Halogen-free
Sealable
Silicon-free
New items
5SY1708-4, Siemens
The Siemens device circuit breaker having 1-pole with auxiliary switch NO contact characteristic, the mechanical life is 6000 cycles.
Halogen-free
Sealable
Silicon-free
New items
5SD7443-1, Siemens
The Siemens 5SD series is a combination arresters,type 1+2 with requirement class B+C and Pluggable protective modules. 3+0 circuit for TN-S and TT systems with remote display .
It has Protection class rating of IP20
Type of distributive system is TT,TN-S
New items
5SD7461-0, Siemens
The Siemens 5SD series is a surge arresters,type 2 with requirement class c and Pluggable protective modules. L-N circuit for TN-S and TT systems .
It has Protection class rating of IP20
Type of distributive system is TT,TN-S