Rates
10+
£ 1.74
Products Found: 329
Showing Results For: Splice Connectors
Splice Connectors
FILTERS
Filters
Showing
1 -
New Items
New items
New items
148-90054, HellermannTyton
The Hellermann Tyton helaCon connectors are used for fast, easy and reliable connection and distribution of cable and conductors in electrical installation applications. The new generation of HelaCon Plus Mini wire connectors can be applied tool-free using the push-in technology. HelaCon Plus Mini uses a double spring which is approved for solid and stranded wires.
40 % smaller Space saving design
Low insertion force, Easy to use, saves time on installation
Easy access to voltage test entry and innovative port shape design
Correct installation can be visually checked through transparent housing
Different colour codes for easy identification of size
Allows different conductor diameters in each entry
Safe application, installation and maintenance
New items
D-200-83, TE Connectivity
TE Connectivity D-200 MiniSeal Crimp Splices
D-200 MiniSeal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 MiniSeal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and strain relief, meltable thermoplastic rings and nickel plated (SAE AMS-QQ-N-290) copper alloy (101 or 102 per ASTM B75) splice barrels. Suitable applications for these D-200 MiniSeal splices include aerospace and defence applications and for protecting and sealing RCW and BMS13-60 nickel-plated wires.
Stock number
782-4831
is for use with a wire range of 26-20 AWG and is colour coded red
Stock number
782-4822
is for use with a wire range of 20-16 AWG and is colour coded blue
Stock number
782-4828
is for use with a wire range of 16-12 AWG and is colour coded yellow
For suitable crimp tool see stock number
444-5693
Standards
Specification Control Document D-200-82/-83/-84
Met or exceeded the following requirements successfully: SAE-AMS-DTL-23053/13 (applies only to insulation sleeve), SAE-AS81824/1 (modified for 200˚C applications)
Under qualification for EN 3373-014
Splices
New items
63130-2, TE Connectivity
The TE Connectivity splice connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.
EU RoHS complaint
EU ELV complaint
New items
148-00114 HECP-3-32-PC-CL/OG, HellermannTyton
HelaCon Plus
HelaCon Plus is a sophisticated push-in wire connector for professional cable connections in electrical housing applications. The newly developed double spring allows easy processing of single core and multi-core conductors and will support installers especially in tricky situations like overhead work. This ensures proper fixing that can optically be checked through the transparent housings. Different colour codes provide a comfortable identification of the different connectors. A separate voltage test entry on the front guarantees safety during application, installation and maintenance.
Transparent housing allows quick and easy checking of conductor fitting
Separate test entry on front allows use of voltage meter
Connector depth 19mm
New items
19039-0005, Molex
The Molex avikrimp snap plug receptacle for 18-22 AWG wire. Insulation is made up of nylon and fits male plug diameter of 4.57mm.
Barrel type closed
Color - Resin Red
Flammability 94V-2
Gender female
Glow-wire capable no
Insulation nylon (PA)
Wire size AWG 18, 20, 22
New items
19205-0007, Molex
The Molex versakrimp parallel splice for 4 AWG wire.
Barrel type closed - Brazed
Material - metal Copper
Material - plating mating tin
Material - Plating termination tin
Net weight 6.659/g
Packaging type Bag
Wire size AWG 4
New items
MP50, MECATRACTION
The Mecatraction copper parallel connectors are made from tin plated copper with funnel entry.
Tin plated copper
Funnel entry
New items
MP70, MECATRACTION
The Mecatraction copper parallel connectors are made from tin plated copper with funnel entry.
Tin plated copper
Funnel entry
New items
7TAI029580R0003, ABB
The ABB 2F-4 non-insulated butt splice has 1.12 inches in length and has width of 0.377 inch. It is ideal for temperatures of up to 150 degree celsius.
Rated for voltages of up to 600V
New items
7TAI029010R0014, ABB
The ABB insulation piercing magnet wire splice has 2,580 to 12,330 circular mil area. The material used is copper alloy (tin plated).
Length 0.44 inches
Width 0.25 inches
Height 0.22 inches
Wire range 16 AWG to 12 AWG
New items
323975, TE Connectivity
TE Connectivity PIDG Closed Barrel Butt Splice
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both a copper and nylon colour coded sleeve. The copper sleeve surrounding the barrel provides improved wire insulation support after crimping allowing the wire to bend without fraying the insulation or breaking the conductor. The nylon sleeves are colour coded according to wire-size to assist with identification. Inside the PIDG splice terminal wire barrel are serrations which provide maximum contact and tensile strength after crimping. The construction of these PIDG terminals and the use of specialised tool dies allows for uniform insulation thickness under crimping pressure. This pressure is then transmitted evenly to the centre of the crimping area to produce a uniform and reliable crimp. Available with various wire and barrel sizes, these PIDG splice terminals offer a versatile solution to a wide range of wiring applications
Features & Benefits
High conductivity copper body
Copper sleeve for improved wire insulation support
Serrations in wire barrel for maximum contact and tensile strength
Colour coded sleeves for easy wire size and tooling identification
Design enables a reliable and uniform crimp
Product Application Information
These PIDG splice terminals are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.
Approvals
UL recognised (Approvals only apply to the packs of 10...