New PL & New PL-P Series Single, Dual and Triple Output PSUs
Single, dual or triple output models
Models from 6V/8A up to 60V/1.5A
Linear regulation - for the best performance
Ultra-compact design - uses up less space
True Analog controls - for ease of use
S-Lock function - instantly lock settings
V-Span function - customise the voltage range
Low current range and current meter averaging
DC output switches and 'view limits' button
Selectable remote sense terminals
Independent, Isolated Tracking, Ratio Tracking and True Parallel modes on dual & triple models
High current low voltage output on triple output model
Output
PL Series
Operating modes
Constant voltage or constant current with automatic crossover
Load regulation
<0.01%
Line regulation
<0.01%
Output noise
Typically <0.5mV rms (single), <0.5mV rms (dual)
Voltage adjustment
By analogue coarse and fine controls
Current adjustment
By analogue logarithmic control
Low current range
500mA range giving greater setting and metering resolution
Meter averaging
Switchable averaging of current meter reading to reduce fluctuations
Setting stability
With S-Lock function engaged, settings are stable to better than 1 digit
Voltage limits
With V-Span function enabled, both end points of the coarse voltage control pot can be set to any values to limit the output voltage range
Meter accuracies
Voltage 0.1% ± 1digit; current 0.3% ± 1 digit
Meter resolutions
Voltage 10mV; current 1mA or 0.1mA
DC output switch
Sets voltage to zero when off (for dual output PSU, additional Both On and Both Off switches allow synchronous switching of the two outputs)
Remote sensing
Switch selectable as local or remote; remote connection via front terminals
PL-P Series
Digital Interfaces
All digital interfaces are fully isolated from the output
RS-232
Standard RS232/RS423 interface using 9 pin D connector
USB
Standard USB hardware connection. Supplied wi...
