Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

We hope you are enjoying our new upgraded website. Bringing you faster search results and a greater variety of products. Please click here to share your comments/experience.

Products Found: 71

Showing Results For: Wi-Fi Modules

Wi-Fi Modules


FILTERS
Filters
Enrgtech #
Manufacturer Part No
Description
Availability
Rating
Rohs Verified
MRF24J40ME is a 2.4 GHz 802.15.4 radio transceiver module intended for longer range applications. The MRF24J40ME has an external antenna connector, matching circuitry, and supports the ZigBee®, MiWi™ and MiWi P2P protocols. The MRF24J40ME module connects to hundreds of PIC® microcontrollers via a 4-wire SPI interface and is an ideal solution for AMR/AMI metering, wireless sensor networks, home automation, building automation and consumer applications. 2.4 GHz Transceiver Module Supports ZigBee®, MiWi™, and MiWi P2P protocols Pin Compatible with MRF24J40MB and MRF24J40MC External antenna connector: ultra miniature coaxial (U.FL), 50Ω with simple four-wire SPI interface to PIC® microcontroller Integrated Crystal, Internal Voltage Regulator, Matching Circuitry, Power Amplifier, Low Noise Amplifier Easy Integration into Final Product: Minimize Product Development, Quicker Time to Market
Check Stock & Lead Times Packaging Options
Rohs Verified
Microchip's ATWINC1500 is an 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The ATWINC1500 connects to any SAM or PIC MCU with minimal resource requirements. The ATWINC1500's most advanced mode is a single stream 1x1 802.11n mode. The ATWINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI. Single-band 2.4GHz b/g/n IoT Network Controller Extreme low power Operating voltage: 3.0V to 4.2V Serial host interface: SPI Security protocols supported: WPA/WPA2 Personal, TLS, SSL Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS Integrated into Atmel Studio 7 - See ASF release notes Atmel Software Framework (ASF) Free Software download available Small form factor module measures just 21.7 x 14.7mm
Check Stock & Lead Times Packaging Options
Rohs Verified
ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces. The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. 20MHz (1x1) Wi-Fi plus Bluetooth 5 Low Energy Module Single spatial stream in 2.4GHz ISM band Integrated PA and T/R Switch Superior Sensitivity and Range via advanced PHY signal processing Wi-Fi Direct and Soft-AP support Supports Personal & Enterprise WEP, WPA, WPA2 Security On-chip memory management engine to reduce host load SPI, SDIO, I2C, and UART host interfaces HCI (Host Control Interface) via high speed UART Operating temperature range of -40C to +85C
Check Stock & Lead Times Packaging Options
Silicon Labs
Rohs Verified
RF TXRX MODULE WIFI CHIP ANT
Check Stock & Lead Times Packaging Options
Silicon Labs
Rohs Verified
MGM210P MIGHTY GECKO MODULE +10
Check Stock & Lead Times Packaging Options
Microchip
Rohs Verified
Ultra-low power for battery powered applications Firmware configurable transmit power: 0dBm to +12dBm Hardware interfaces: UART and SPI Slave Supports SoftAP and infrastructure networking modes RF pad for external antenna User programmable GPIO & ADCs Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes Run directly from batteries or regulated power supplies Configuration over serial or wireless interface using simple ASCII commands Over the air firmware upgrade Secure Wi-Fi authentication schemes (WEP/WPA/WPA2) Full onboard TCP/IP stack (no external drivers required).
Check Stock & Lead Times Packaging Options
Microchip
Rohs Verified
RN-171-XV 802.11b/g WiFi Modules The RN-171-XV series from Microchip are certified IEEE 802.11b/g WiFi modules that incorporate a 32 bit SPARC processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and an analogue sensor interface. These modules are specially designed to allow the migration from existing 802.15.4 architecture to a more standard TCP/IP-based platform without the need for hardware redesign. RF Carrier Frequency: 2.4GHz ISM Band RF Transmit Power: up to +12dBm Receiver sensitivity: -83dBm Host communication: serial UART Host data rate: 464kbps with RTS/CTS flow control 8 x GPIO pins 3 x analogue sensor inputs Real-time clock for wakeup and time stamping Antenna options: Wire (RS 769-4144 ), SMA connector (RS 769-4141 ), U.FL connector (RS 841-7481 ) On-board TCP/IP stack No custom profiles needed Embedded networking applications: DHCP, DNS, ARP, ICMP UDP, Telnet, FTP client and HTML client Security: WEP, WPA and WPA2-PSK WPS mode for easy configuration Drop in WiFi replacement for existing systems that currently use 802.15.4 modules Ultra-low power: 4μA sleep, 40mA Rx, 180mA Tx @ 10dBm Power supply: +3.0V to +3.7Vdc Operating temperature range: -40 to +85°C FCC/CE/ICS certified Applications: Industrial metering, HVAC control, Room temperature sensors, Pump configuration and control, Telemetry, PV/solar controllers, Robotics, local communication for the Internet of Things (IoT) WLAN (Wireless Local Area Network) - Microchip Technology
Check Stock & Lead Times Packaging Options
WIZnet Inc
Rohs Verified
WizFi220 Low Power “Serial to WiFi” Module with Additional Power Amplifier Bring WiFi connectivity via Serial Host Interface Quick Booting Time : under 20ms Ultra Low Power through Dynamic Power Management (34μA at the Standby mode) Operates with standard 802.11b/g/n access point at speed up to11Mbps (IEEE 802.11b) Security Protocol: WEP, WPA/WPA2-PSK, Enterprise EAP-FAST, EAP-TLS, EAP-TTLS, PEAP Operation Temperature -40 to 85℃ Compact Size 32 x 23.5 x 2.9 mm CE, FCC, KCC Certified WLAN - WIZnet
Check Stock & Lead Times Packaging Options
Wurth Elektronik
Rohs Verified
The Wurth Elektronik calypso WIFI module used UART interface and fully integrated single 2.4GHz band 802.11 b/g/n module. It provide a low cost and simple Wi-Fi solution for devices that run an operating system and a TCP/IP stack on-board and its height is 4mm and has 19 mm of length. Operating temperature -40 up to +85 °C
Check Stock & Lead Times Packaging Options
Laird Connectivity
Rohs Verified
The Laird Connectivity dual band 2x2 802.11ac WLAN plus Bluetooth 5.1 dual mode adapter it complies with M.2 2230 E-Key standard. WLAN/Bluetooth coexistence protocol support Shared LNA with WLAN/Bluetooth 20/40/80 MHz channel bandwidths support
Check Stock & Lead Times Packaging Options
Laird Connectivity
Rohs Verified
The Laird Connectivity dual band 2x2 802.11ac WLAN plus Bluetooth 5.1 dual mode adapter it complies with M.2 2230 E-Key standard. WLAN/Bluetooth coexistence protocol support Shared LNA with WLAN/Bluetooth 20/40/80 MHz channel bandwidths support
Check Stock & Lead Times Packaging Options
Rohs Verified
MRF24WN0MA/MB 2.4 GHz 802.11b/g/n Wireless Modules The Microchip MRF24WN0 is a family of 2.4GHz 802.11b/g/n Wireless Modules that integrate all the required RF components into one compact form factor. The module includes a Voltage Regulator, Crystal Oscillator, RF Matching Circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA) and encryption support. Provided is a 4-wire SPI with which to interface to a host controller. Two module variants are available; the MRF24WN0MA with Integral Antenna and the MRF24WN0MB with External Antenna Connection. Features Fully integrated wireless module IEEE 802.11b/g/n compliant transceiver 2.4 GHz IEEE 802.11n Single Stream 1x1 4-Wire SPI Interface to Host Controller (including interrupt) Works with Microchip's MPLAB® Harmony Integrated Software Framework Compact surface mount module: 17.8 mm x 26.7 mm x 2.2 mm Castellated surface mount pads for easy and reliable PCB mounting Environmentally friendly, RoHS compliant WLAN (Wireless Local Area Network) - Microchip Technology
Check Stock & Lead Times Packaging Options

Silicon Labs WGM110A1MV2

Silicon Labs MGM210P022JIA2

Microchip RN171XVS-I/RM WiFi Module

Calypso WIFI module


New Items
New items
Microchip MRF24J40ME-I/RM 3 → 3.6V WLAN Module SPI

Microchip MRF24J40ME-I/RM 3 → 3.6V WLAN Module SPI

MRF24J40ME is a 2.4 GHz 802.15.4 radio transceiver module intended for longer range applications. The MRF24J40ME has an external antenna connector, matching circuitry, and supports the ZigBee®, MiWi™ and MiWi P2P protocols. The MRF24J40ME module connects to hundreds of PIC® microcontrollers via a 4-wire SPI interface and is an ideal solution for AMR/AMI metering, wireless sensor networks, home automation, building automation and consumer applications. 2.4 GHz Transceiver Module Supports ZigBee®, MiWi™, and MiWi P2P protocols Pin Compatible with MRF24J40MB and MRF24J40MC External antenna connector: ultra miniature coaxial (U.FL), 50Ω with simple four-wire SPI interface to PIC® microcontroller Integrated Crystal, Internal Voltage Regulator, Matching Circuitry, Power Amplifier, Low Noise Amplifier Easy Integration into Final Product: Minimize Product Development, Quicker Time to Market
New items
Microchip Technology ATWINC1500-MR210PB1172 2.7 → 3.6V WLAN Module SPI

Microchip Technology ATWINC1500-MR210PB1172 2.7 → 3.6V WLAN Module SPI

Microchip's ATWINC1500 is an 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The ATWINC1500 connects to any SAM or PIC MCU with minimal resource requirements. The ATWINC1500's most advanced mode is a single stream 1x1 802.11n mode. The ATWINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI. Single-band 2.4GHz b/g/n IoT Network Controller Extreme low power Operating voltage: 3.0V to 4.2V Serial host interface: SPI Security protocols supported: WPA/WPA2 Personal, TLS, SSL Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS Integrated into Atmel Studio 7 - See ASF release notes Atmel Software Framework (ASF) Free Software download available Small form factor module measures just 21.7 x 14.7mm
New items
Microchip Technology ATWILC3000-MR110CA 3 → 3.6V WLAN Module SDIO, SPI

Microchip Technology ATWILC3000-MR110CA 3 → 3.6V WLAN Module SDIO, SPI

ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces. The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. 20MHz (1x1) Wi-Fi plus Bluetooth 5 Low Energy Module Single spatial stream in 2.4GHz ISM band Integrated PA and T/R Switch Superior Sensitivity and Range via advanced PHY signal processing Wi-Fi Direct and Soft-AP support Supports Personal & Enterprise WEP, WPA, WPA2 Security On-chip memory management engine to reduce host load SPI, SDIO, I2C, and UART host interfaces HCI (Host Control Interface) via high speed UART Operating temperature range of -40C to +85C
New items
Silicon Labs WGM110A1MV2

Silicon Labs WGM110A1MV2

RF TXRX MODULE WIFI CHIP ANT
New items
Silicon Labs MGM210P022JIA2

Silicon Labs MGM210P022JIA2

MGM210P MIGHTY GECKO MODULE +10
New items
Microchip Technology RN171-I/RM481 3.7V dc WLAN Module, 2.4 GHz IEEE Std. 802.11 b/g 2-Wire UART

Microchip Technology RN171-I/RM481 3.7V dc WLAN Module, 2.4 GHz IEEE Std. 802.11 b/g 2-Wire UART

Ultra-low power for battery powered applications Firmware configurable transmit power: 0dBm to +12dBm Hardware interfaces: UART and SPI Slave Supports SoftAP and infrastructure networking modes RF pad for external antenna User programmable GPIO & ADCs Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes Run directly from batteries or regulated power supplies Configuration over serial or wireless interface using simple ASCII commands Over the air firmware upgrade Secure Wi-Fi authentication schemes (WEP/WPA/WPA2) Full onboard TCP/IP stack (no external drivers required).
New items
Microchip RN171XVS-I/RM WiFi Module

Microchip RN171XVS-I/RM WiFi Module

RN-171-XV 802.11b/g WiFi Modules The RN-171-XV series from Microchip are certified IEEE 802.11b/g WiFi modules that incorporate a 32 bit SPARC processor, TCP/IP stack, real-time clock, crypto accelerator, power management unit and an analogue sensor interface. These modules are specially designed to allow the migration from existing 802.15.4 architecture to a more standard TCP/IP-based platform without the need for hardware redesign. RF Carrier Frequency: 2.4GHz ISM Band RF Transmit Power: up to +12dBm Receiver sensitivity: -83dBm Host communication: serial UART Host data rate: 464kbps with RTS/CTS flow control 8 x GPIO pins 3 x analogue sensor inputs Real-time clock for wakeup and time stamping Antenna options: Wire (RS 769-4144 ), SMA connector (RS 769-4141 ), U.FL connector (RS 841-7481 ) On-board TCP/IP stack No custom profiles needed Embedded networking applications: DHCP, DNS, ARP, ICMP UDP, Telnet, FTP client and HTML client Security: WEP, WPA and WPA2-PSK WPS mode for easy configuration Drop in WiFi replacement for existing systems that currently use 802.15.4 modules Ultra-low power: 4μA sleep, 40mA Rx, 180mA Tx @ 10dBm Power supply: +3.0V to +3.7Vdc Operating temperature range: -40 to +85°C FCC/CE/ICS certified Applications: Industrial metering, HVAC control, Room temperature sensors, Pump configuration and control, Telemetry, PV/solar controllers, Robotics, local communication for the Internet of Things (IoT) WLAN (Wireless Local Area Network) - Microchip Technology
New items
WIZnet Inc WIZFI220 3.3V WLAN Module, 802.11b/g/n ALARM, GPIO, I2C, SPI, UART, WAKE

WIZnet Inc WIZFI220 3.3V WLAN Module, 802.11b/g/n ALARM, GPIO, I2C, SPI, UART, WAKE

WizFi220 Low Power “Serial to WiFi” Module with Additional Power Amplifier Bring WiFi connectivity via Serial Host Interface Quick Booting Time : under 20ms Ultra Low Power through Dynamic Power Management (34μA at the Standby mode) Operates with standard 802.11b/g/n access point at speed up to11Mbps (IEEE 802.11b) Security Protocol: WEP, WPA/WPA2-PSK, Enterprise EAP-FAST, EAP-TLS, EAP-TTLS, PEAP Operation Temperature -40 to 85℃ Compact Size 32 x 23.5 x 2.9 mm CE, FCC, KCC Certified WLAN - WIZnet
New items
Calypso WIFI module

Calypso WIFI module

The Wurth Elektronik calypso WIFI module used UART interface and fully integrated single 2.4GHz band 802.11 b/g/n module. It provide a low cost and simple Wi-Fi solution for devices that run an operating system and a TCP/IP stack on-board and its height is 4mm and has 19 mm of length. Operating temperature -40 up to +85 °C
New items
Microchip RN171-I/RM475 3.3V WiFi Module ASCII, GPIO, ISP, SPI, UART

Microchip RN171-I/RM475 3.3V WiFi Module ASCII, GPIO, ISP, SPI, UART

RN-171 802.11b/g WiFi Modules The Microchip RN171 is a compact 802.11b/g WiFi Module that simplifies adding WiFi connectivity into designs. The module integrates all the required hardware with an on-board TCP/IP stack to provide a full featured 802.11b/g module. Configuration of the RN171 is via simple ASCII commands over UART. The Power Management features of the RN171 are ideal for portable, battery powered applications. The module features Battery Boost Circuitry and in Sleep Mode consumes only 4 μA. Device Features Complete, Embedded 2.4 GHz IEEE 802.11b/g Wireless LAN Module 14 GPIO Pins (Four GPIOs shared with UART) Eight Analogue Sensor Inputs Compact Form Factor: 26.67 x 17.78 x 3.18 mm Integrated Crystal, Internal Voltage Regulator, Matching Circuitry, Power Amplifier Configured using Simple ASCII Commands Supports Infrastructure and SoftAp Networking Modes Built-in Networking Applications: TCP, UDP, DHCP, DNS, ICMP, ARP, HTTP Client, and FTP Client Complete On-Board TCP/IP Networking Stack Unique MAC Address Upgrade Firmware Over the Air using FTP Supports WiFi Protected Setup (WPS) Security: WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES) RF Features Frequency: 2.412 to 2.462 GHz 802.11b Modulation Compatibility: DSSS (CCK-11, CCK-5.5, DQPSK-2, DBPSK-1) 802.11g Modulation Compatibility: OFDM Receive (Rx) Sensitivity: -83 dBm (typical) Power Output: 0 to +12 dBm Power Management Features Ultra Low-Power Sleep Mode (4 μA) Battery Boost Control Circuitry Real-Time Clock for Time Stamping, Auto-Sleep, and Auto-Wake WLAN (Wireless Local Area Network) - Microchip Technology
New items
Microchip MRF24WN0MA-I/RM100 3.15 → 3.45V WiFi Module, 802.11b/g/n SPI

Microchip MRF24WN0MA-I/RM100 3.15 → 3.45V WiFi Module, 802.11b/g/n SPI

MRF24WN0MA/MB 2.4 GHz 802.11b/g/n Wireless Modules The Microchip MRF24WN0 is a family of 2.4GHz 802.11b/g/n Wireless Modules that integrate all the required RF components into one compact form factor. The module includes a Voltage Regulator, Crystal Oscillator, RF Matching Circuitry, Power Amplifier (PA), Low Noise Amplifier (LNA) and encryption support. Provided is a 4-wire SPI with which to interface to a host controller. Two module variants are available; the MRF24WN0MA with Integral Antenna and the MRF24WN0MB with External Antenna Connection. Features Fully integrated wireless module IEEE 802.11b/g/n compliant transceiver 2.4 GHz IEEE 802.11n Single Stream 1x1 4-Wire SPI Interface to Host Controller (including interrupt) Works with Microchip's MPLAB® Harmony Integrated Software Framework Compact surface mount module: 17.8 mm x 26.7 mm x 2.2 mm Castellated surface mount pads for easy and reliable PCB mounting Environmentally friendly, RoHS compliant WLAN (Wireless Local Area Network) - Microchip Technology
New items
Laird Connectivity ST60-2230C-UU 3.3V BLE/WiFi Module

Laird Connectivity ST60-2230C-UU 3.3V BLE/WiFi Module

The Laird Connectivity dual band 2x2 802.11ac WLAN plus Bluetooth 5.1 dual mode adapter it complies with M.2 2230 E-Key standard. WLAN/Bluetooth coexistence protocol support Shared LNA with WLAN/Bluetooth 20/40/80 MHz channel bandwidths support
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Wi-Fi Modules and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Wi-Fi Modules or any other product.
This depends on the Wi-Fi Modules individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Wi-Fi Modules and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Wi-Fi Modules.
Yes. We keep updating our stock frequently and if a product like Wi-Fi Modules is not in stock then we will let you know.