What are the shipping charges for products like RF ICs?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

Where are your products like RF ICs manufactured?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like RF ICs?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

How long will it take to receive the order that I placed for RF ICs?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

Are your products RF ICs in stock?

Yes. We keep updating our stock frequently and if a product like RF ICs is not in stock then we will let you know.

RF IC | Wireless Communication Module

New items

F2977NEGK, Renesas Electronics

The Renesas Electronics F2977 is a 50Ω single-pole double-throw (SP2T) reflective RF switch featuring high linearity and wide bandwidth. This device is optimized from 30MHz to 6GHz to support a multitude of wireless RF applications. The F2977 uses a single positive supply voltage of either +3.3V or +5.0V and is compatible with either 1.8V or 3.3V control logic. Low insertion loss 0.38dB at 2.4GHz 0.45dB at 6GHz High Isolation: 34dB at 2.4GHz 26dB at 6GHz High Linearity: IIP2 +120dBm at 2.4GHz IIP3 +77dBm at 2.4GHz P0.1dB compression of +40dBm Second Harmonic: -86dBc at Fin = 1.8GHz, Pin = 33dBm Third Harmonic: -89dBc Fin = 1.8GHz, Pin = 33dBm

Product Detail

New items

ADF7021BCPZ, Analog Devices

ADF7021 Sub-1GHz RF Transceiver The ADF7021 device is a low-power narrowband dual-VCO RF transceiver, designed for operation in the sub-1GHz frequency bands. RF Frequency Ranges: 80 to 650MHz and 862 to 950MHz RF Output Power: up to +13dBm Receiver Sensitivity: -130dBm @ 100bps, FSK Modulation: FSK, GFSK, MSK, 3FSK or 4FSK Support for Gaussian and Raised-Cosine transmit data filtering Programmable IF filter bandwidth: 12.5kHz, 18.75kHz & 25kHz OTA data rate: up to 32.8kbps Digital RSSI Host communication: serial UART, SPI Temperature sensor On-chip 7-bit ADC Power supply: +2.3V to +3.6Vdc Operating temperature range: -40 to +85°C Applications: Home automation, Process & building control, Wireless metering, Remote control, Local communication for the Internet of Things (IoT) RS Product Codes 697-7565 ADF7021BCPZ Approvals ETSI, FCC, ARIB

Product Detail

New items

Si4460-B1B-FM, Silicon Labs

EZRadioPRO® Sub-1GHz Wireless Transmitters/Receivers/Transceivers The EZRadioPRO ® family of highly integrated, flexible wireless RF transmitters, receivers and transceivers offers enhanced parameters and features over those in the EZRadio® range of devices. Designed for more sophisticated ISM band applications these ICs feature support for IEEE 802.15.4g and wireless M-Bus operation. Depending on the device, frequency coverage ranges from 119MHz to 1050MHz with output power of up to +20 dBm and receiver sensitivity down to -133dBm. Other features include a wake-up timer, low-battery detector, transmit and receive data FIFO buffers, power-on reset circuit and general purpose digital I/O. All are housed in a QFN20 package. RS Product Codes 759-6472 Si4032-B1-FM Transmitter, 240-930MHz, +20dBm, FSK 819-6900 Si4063-B1B-FM Transmitter, 142-1050MHz,+20dBm, FSK 759-6498 Si4330-B1-FM Receiver, 240-960MHz, -121dBm, FSK 819-6913 Si4362-B1B-FM Receiver, 142-1050MHz, -126dBm, FSK 759-6501 Si4431-B1-FM Transceiver, 240-930MHz, +13dBm, -121dBm, FSK 759-6505 Si4432-B1-FM Transceiver, 240-930MHz, +20dBm, -121dBm, FSK 865-9843 Si4438-C2A-GM Transceiver, 425-525MHz, +20dBm, -124dBm, FSK 865-9852 Si4455-C2A-GM Transceiver, 284-960MHz, +13dBm, -116dBm, FSK 819-6922 Si4460-B1B-FM Transceiver, 142-1050MHz, +13dBm, -126dBm, FSK 865-9855 Si4460-C2A-GM Transceiver, 142-1050MHz, +13dBm, -126dBm, FSK 819-6938 Si4461-B1B-FM Transceiver, 142-1050MHz, +16dBm, -126dBm, FSK 865-9859 Si4461-C2A-GM Transceiver, 142-1050MHz, +16dBm, -126dBm, FSK 819-6950 Si4463-B1B-FM Transceiver, 142-1050MHz, +20dBm, -126dBm, FSK 865-9868 Si4463-C2A-GM Transceiver, 142-1050MHz, +20dBm, -126dBm, FSK 819-6979 Si4464-B1B-FM Transceiver, 119-1050MHz, +20dBm, -126dBm, FSK 865-9861 Si4467-A2A-IM Transceiver, 142-1050MHz, +13dBm, -133dBm, FSK 865-9865 Si4468-A2A-IM Transceiver, 142-1050MHz, +20dBm, -133dBm, FSK

Product Detail

New items

SI4464-B1B-FM, Silicon Labs

IC RF TXRX+MCU ISM

Product Detail

New items

BGSA14GN10E6327XTSA1, Infineon

The Infineon BGSA14GN10 is a Single Pole Quad Throw (SP4T) RF antenna tuning switch optimized for low COFF enabling applications up to 6.0 GHz. This single supply chip integrates on-chip CMOS logic driven by a simple, single-pin CMOS or TTL compatible control input signal. Unlike GaAs technology, the 0.1 dB compression point exceeds the switch maximum input power level, resulting in linear performance at all signal levels and external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally. High-linearity SP4T for antenna tuning switching applications Ultra-Low RON of 1.6 Ω in ON state Ultra-Low COFF of 120 fF in OFF state High max RF voltage state handling Low harmonic generation

Product Detail

New items

F2933NBGP, Renesas Electronics

The Renesas Electronics RF Switch is a high-reliability, low-insertion loss, 50 Ω SP2T absorptive RF switch designed for a wide range of markets and applications. This device covers a broad frequency range from 50 MHz to 8000 MHz, has an operating temperature range of -40 to 105°C and wide supply voltage range of 2.7 - 5.5 VDC. Designed for high-power handling, the RF Switch has a P1 dB as high as 36.5 dBm, supporting a peak operating power of 34 dBm in the through path and a hot switching power of 27 dBm into the terminated RF port. In addition to providing low-insertion loss, the RF Switch also delivers high isolation and low distortion performance while providing a 50 Ω termination to the unused RF ports. The RF Switch uses a single positive supply voltage supporting three logic control pins using either 3.3 V or 1.8 V control logic. Dual symmetric broad band, absorptive RF ports RFC-RFX isolation of 67 dB Insertion loss of 0.79 dB High continuous RF CW power handling 3.3 V and 1.8 V compatible control logic Operating temperature of -40 °C to +105 °C

Product Detail

New items

BGSA403ML10E6327XTSA1, Infineon

The Infineon Low resistance antenna is a versatile shunt to ground 4 x single-pole single-throw (4xSPST) RF antenna tuning switch, it is optimized for low Coff as well as low Ron enabling applications up to 7.125 GHz and is ideal for antenna tuning application also this chip integrates on-chip CMOS logic and power supply regulation., its digital control interface is compliant with MIPI2, RFFE specification and each switch throw can be programmed individually or all together in the same RFFE command frame. Low Ron resistance of 0.98 ohm in ON state Low Coff capacitance of 205 fF in OFF state High RF operating peak voltage handling of 50 V in OFF state MIPI RFFE 2.1 control interface Extremely low current consumption of 22 μA 4 USID addresses enabled by external condition at USID_SEL pin Small form factor 1.1 mm x 1.5 mm

Product Detail

New items

ST25R100, STMicroelectronics

The STMicroelectronics compact NFC/RFID reader IC optimized for high-performance contactless interactions. Its versatile design supports multiple NFC standards and custom protocols, making it suitable for various applications. The chip features advanced low power card detection and high output power for robust performance. It operates efficiently across a wide voltage range and is housed in a small 4x4 mm package. Ideal for applications in healthcare, access control, and IoT, it offers reliable performance even in noisy environments. ISO14443A/B and ISO15693/NFC-V communication standards Adjustable ASK modulation depth with dynamic power output Improved low power card detection with inductive wake-up Connects two independent single-ended antennas High output power and automatic gain control

Product Detail

New items

NCH-RSL15-512-101Q40-ACG, onsemi

RSL15 QFN 512KB

Product Detail

New items

nRF7001-QFAA-R7, Nordic Semiconductor

The Nordic Semiconductor wireless companion IC is featured with adding low-power Wi-Fi 6 capabilities to another System on Chip(SoC), Memory Protection Unit (MPU), or Microcontroller Unit (MCU) host. It is designed for IoT applications, and is ideal for adding modern Wi-Fi 6 capabilities to existing Bluetooth Low Energy, Thread or Zigbee systems. It has 6x6 mm QFN48 package. Supports IEEE 802.11 ax and earlier standards (IEEE 802.11 b/g/n) Supports Target Wake Time (TWT), Orthogonal Frequency Division Multiple Access (OFDMA), Basic Service Set (BSS) Coloring Supports Wi-Fi CERTIFIED 6 Wi-Fi CERTIFIED, Wi-Fi Enhanced Open Supports WPA3, WPA2, WPA- Personal and Enterprise, Protected Management Frames Supports WMM, WMM - Power Save, Wi-Fi Agile Multiband, Wi-Fi Direct Maximum output power 21 dBm Single-band 2.4 GHz SPI or QSPI host interface, 3-wire or 4-wire coexistence interface

Product Detail

New items

TDA5240XUMA1, Infineon

The Infineon SmartLEWIS RX+ IC is a low power ASK/FSK Receiver for the frequency bands 300-320, 425-450, 863-870 and 902-928 MHz. Bi-phase modulation schemes, like Manchester, bi-phase mark, bi-phase space and differential Manchester are supported. The chip offers best-in-class sensitivity performance at a very high level of integration and needs only a few external components. The device is qualified to automotive quality standards and operates between -40 and +105°C at supply voltage ranges of 3.0-3.6 Volts or 4.5-5.5 Volts. The receiver is realized as a double down conversion super-heterodyne/low-IF architecture each with image rejection supplemented by digital signal processing in the baseband. Separate outputs for recovered data and clock RSSI peak detectors Wake-up generator and polling timer unit Message ID scanning Unique 32-bit serial number On-chip temperature sensor Integrated timer usable for external watch unit Integrated 4-wire SPI interface bus

Product Detail

New items

BGT60LTR11AIPE6327XUMA2, Infineon

The Infineon fully integrated microwave motion sensor including antennas in package as well as built-in detectors for motion and direction of motion. A state machine enables operation of the sensor without any external microcontroller. In this autonomous mode, it detects a human target up to 7 m with a low power consumption. The BGT60LTR11AIP enables radar technology for everyone, since it does not require know-how in RF, antenna design or radar signal processing. These features make the small sized radar solution a compelling smart and cost effective replacement for conventional PIR sensors in low power or battery-powered applications. 3.3 x 6.7 x 0.56 mm package size 1Tx 1Rx antennas in package with 80 ° half power beam-width Built-in motion detector Built-in direction of motion detector Multiple modes of operation includes a completely autonomous mode Adjustable performance parameters detection sensitivity, hold time and frequency of operation

Product Detail