What are the shipping charges for products like Temperature Transmitters?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

Where are your products like Temperature Transmitters manufactured?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Temperature Transmitters?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

How long will it take to receive the order that I placed for Temperature Transmitters?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

Are your products Temperature Transmitters in stock?

Yes. We keep updating our stock frequently and if a product like Temperature Transmitters is not in stock then we will let you know.

Temperature Transmitters | Temperature Transmitter 4 20ma

New items

TMT188-AKAFA, Endress+Hauser

The Endress+Hauser transmitter is designed for the transformation of a thermocouple sensor signal in a fixed measuring range. The standardized output signal used for process measurement is a 4 to 20 mA signal. This means fast, easy and cost saving temperature measuring as well as reliable and precise measured values for for a wide range of industry applications. High accuracy in complete ambient temperature range Marine approval Galvanic isolation

Product Detail

New items

707010/888-888-888/000 0..100°C Pt100vl, Jumo

T01 Series transmitters Programmable measurement converter with 4 → 20 mA output. For fitting onto B-shape connection head per DIN 43 729. Can be configured using the setup software + lead.

Product Detail

New items

LKM 213/2, LKMelectronic

LKM 211 / 213 / 214 — Transducer for PT100 and Thermocouples Analogue temperature transducer for PT100 sensors and type J, K thermocouples Housing: EMG25, polycarbonate Sensor break and short-circuit detection EMC according to EN 50081-1 and EN 50082-2 General Loop voltage: 10 → 36 VDC Output: 4 → 20 mA, current loop resistant to inverted polarity Output: 0 → 10 V, protected against short-circuits Operating temperature: -40°C → +85°C Storage temperature: -40 °C → +120 °C LKM 211 for thermocouples, 4 → 20 mA Linearity fault: Fault reference junction: ±0.5 °C Sensor break: >20 mA LKM 213 for PT100, 4 → 20 mA 2, 3 or 4-conductor circuit Linearity fault: Alignment fault: ±0.1 °C Sensor break: >20 mA Sensor short-circuit: LKM 214 for PT100, 0 → 10 V 2, 3 or 4-conductor circuit Supply voltage: 18 → 36 VDC Power consumption: approx. 30 mA Load resistance: >5 kΩ Linearity fault: Alignment fault: ±0.1 °C Sensor break: >10 V Sensor short-circuit:

Product Detail

New items

LKM 213/4, LKMelectronic

LKM 211 / 213 / 214 — Transducer for PT100 and Thermocouples Analogue temperature transducer for PT100 sensors and type J, K thermocouples Housing: EMG25, polycarbonate Sensor break and short-circuit detection EMC according to EN 50081-1 and EN 50082-2 General Loop voltage: 10 → 36 VDC Output: 4 → 20 mA, current loop resistant to inverted polarity Output: 0 → 10 V, protected against short-circuits Operating temperature: -40°C → +85°C Storage temperature: -40 °C → +120 °C LKM 211 for thermocouples, 4 → 20 mA Linearity fault: Fault reference junction: ±0.5 °C Sensor break: >20 mA LKM 213 for PT100, 4 → 20 mA 2, 3 or 4-conductor circuit Linearity fault: Alignment fault: ±0.1 °C Sensor break: >20 mA Sensor short-circuit: LKM 214 for PT100, 0 → 10 V 2, 3 or 4-conductor circuit Supply voltage: 18 → 36 VDC Power consumption: approx. 30 mA Load resistance: >5 kΩ Linearity fault: Alignment fault: ±0.1 °C Sensor break: >10 V Sensor short-circuit:

Product Detail

New items

LKM 103/4, LKMelectronic

Transducer for Terminal Head, Shape B (DIN) for PT100 and Thermocouples, Type K Analogue temperature transducer for PT100 sensors and type K thermocouples Screw terminals, clamping range 0.13 → 1.5 mm 2 Sensor break and short-circuit detection EMC according to EN 50081-1 and EN 50082-2 General Loop voltage: 10 → 36 VDC Output: 4 → 20 mA, current loop resistant to inverted polarity Output: 0 → 10 V, protected against short-circuits Operating temperature: -40°C → +85°C Storage temperature: -40 °C → +120 °C LKM 101 for type K thermocouples, 4 → 20 mA Sensor break: Linearity fault: Fault reference junction: ±0.5 °C LKM 103 for PT100, 4 → 20 mA 2 / 3-conductor circuit Linearity fault: Alignment fault: ±0.1 °C Sensor break: >20 mA Sensor short-circuit: LKM 104 PT100, 0 → 10 V 2-conductor circuit Supply voltage: 18 → 36 VDC Min. load resistance: 5 kΩ No-load current: max. 40 mA Linearity fault: Sensor break: >10 V Sensor short-circuit:

Product Detail

New items

7NG32110NN00, Siemens

Product Detail

New items

6331A2A, PR Electronics

6331A - 2-wire Programmable Transmitter The 6331A is a 2-wire programmable transmitter. The transmitter is for conversion of linear resistance variation to a standard analog current signal, for instance from valves or ohmic level sensors. 2-wire Programmable Transmitter 1-channel version, stock-no. 827-5508 2-channel version, stock-no. 796-6922 Amplification of a bipolar mV signal to a standard 4-20 mA current signal RTD, TC, Ohm or mV input Linearized temperature measurement with Pt, Ni or TC sensor RTD and resistance inputs have cable compensation for 2-, 3- and 4-wire connection Programmable sensor error value A limit can be programmed on the output signal Extremely high measurement accuracy Galvanic isolation DIN rail mounting Temperature Transmitters 4 to 20mA loop powered output and reverse polarity protection, configurable without the need for a PC or software

Product Detail

New items

872-2758, RS Pro

RTD In-Head Mounted Temperature Transmitters with PT100 Input In-head mounted temperature transmitters with Pt100 input and 4-20mA output. Compatible with Pt100 platinum resistance thermometers Surface mounting for remote installation Entry threads M16 1m of 7/0.2mm cable -50 ºC to +150 ºC or 0 ºC to +400 ºC ranges available Temperature Transmitters 4 to 20mA loop powered output and reverse polarity protection, configurable without the need for a PC or software

Product Detail

New items

644SAI1, Rosemount

Engineered for versatility, the Rosemount 644 Temperature Transmitter is the perfect solution to connect to your RTD or thermocouple for reliable and accurate temperature measurement. The Rosemount temperature transmitter has single or dual sensor inputs for RTD, thermocouple, mV and ohm. It reduces complexity and simplify the day-to-day operations. Enhanced display with LOI Integral transient protection Enhanced accuracy and stability

Product Detail

New items

RMPT50BD, Schneider Electric

The Schneider Electrics temperature transmitter are designed to convert signals from sensors or electrical measurement devices into standard electrical signal. The Zelio Control Relays transmitter monitor and detect abnormal operating conditions about phases, current, voltage, frequency, speed, or temperature. It has current consumption of 40 mA for voltage output and 60 mA for current output. This product type is converter for optimum Pt100 probes. Tightening torque 0.6 to 1.1 N.m Marking CE Maximum wiring resistance 0.2 Ohm connection in 2 wires

Product Detail

New items

6337A2A, PR Electronics

6337A 2-Wire HART Transmitter 2-wire HART transmitter is designed according to strict safety requirements and is suitable for applications in SIL installations. Features and Benefits 2 Analogue inputs and 5 device selectable variables with status available HART protocol revision selectable from HART 5 or HART 7 1 ( 136-8682 ) or 2 ( 136-8683 ) channel converter for RTD, TC, Ohm and bipolar mV signals Continuous check of vital stored data Linearised temperature measurement with TC and RTD sensors HART communication and 4…20 mA analogue PV output for individual, difference or average temperature measurement of up to two RTD or TC input sensors Conversation of linear resistance to a standard analogue current signal Amplification of bipolar mV signals to standard 4…20 mA current signals Up to 63 transmitters (HART 7) can be connected in a multi-drop communication setup DIN Rail mounting in Safe Area or Zone 2/22 Meets NAMUR NE 21, NE43 and NE89 recommendations and ensures top measurements performance in harsh EMC environments Temperature Transmitters 4 to 20mA loop powered output and reverse polarity protection, configurable without the need for a PC or software

Product Detail

New items