Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

0.0 / 5

Reviews 0 Not Rated Yet
LKMelectronic Profile

Website
Manufacturer Type
Company Size
Location
Founded
Specialties
Reviews
5 star
(0%)
4 star
(0%)
3 star
(0%)
2 star
(0%)
1 star
(0%)

Be the first to review this manufacturer.
Don’t hesitate to ask questions for better clarification.

Featured Products


Popular Categories For LKMelectronic




New Items
New items
LKM102/K3, LKMelectronic

LKM102/K3, LKMelectronic

The LKMelectronic analog transmitter for thermocouples according to DIN EN 60584 and DIN43510. It is suitable for direct connection to evaluation devices with voltage input such as PLCs or AD converter cards in PCs. The temperature compensation takes place in the transmitter itself. The transmitter type 102 is delivered calibrated according to customer specifications. Depending on the measuring range and the type of thermocouple, the adjustment is carried out in such a way that the occurring temperature errors are minimized. Smaller corrections can be carried out on site by means of a zero and span controller. Operating temperature range -40 to 85 °C Potting compound polyurethane
New items
LKM114, LKMelectronic

LKM114, LKMelectronic

The LKMelectronic digital configurable transmitter for Pt100/Pt1000 with 4 to 20mA current output. Via four DIP switches 12 different measuring ranges can be set. Smaller corrections can be made on site by means of a zero controller. The sensor is connected in 3/2 wire circuit. Clamp type screw terminals Operating temperature range -40 to 85 °C
New items
LKM223/6, LKMelectronic

LKM223/6, LKMelectronic

The LKMelectronic analog transmitter for Pt100, Pt1000 temperature sensors according to DIN EN 60751. Events for mounting on the 35mm DIN-rail. The output signal is highly accurate temperature linear. The transmitter is delivered from the factory calibrated to customer specifications. A span and zero controller allows subsequent fine adjustment. The influence of lead resistances is largely eliminated by the use of a 3 wire circuit. A larger distance between sensor and transmitter is therefore possible without loss of accuracy. If possible, all three leads should be of the same length and have the same cross-section. Material polycarbonate Clamping type screw terminals
New items
LKM212/K1, LKMelectronic

LKM212/K1, LKMelectronic

The LKMelectronic Temperature Transmitter is an analogue transmitter for rail mounting. It can be designed for different thermocouples according to DIN EN 60584 or DIN 43710. It converts the temperature dependent thermoelectric voltage of the sensors into an output voltage signal of 0 to 10V. The temperature compensation takes place in the transmitter itself. It is delivered from the factory calibrated to customer specifications. Zero and span controller Reverse polarity protected Temperature errors are minimized Emission and immunity acc. To EN 61326 standard
New items
LKM400/3, LKMelectronic

LKM400/3, LKMelectronic

The LKMelectronic Temperature Transmitter is a digital, programmable transmitter for resistance sensors with 4 to 20mA current output. On request, this can be potted. Subsequent programming is only possible after consultation. By means of PC and programming cable sensor type and measuring range can be defined. It is operated in 3 wire circuit. Possible corrections to eliminate the line resistance can be made during programming. Solder tags connection Reverse polarity protected 16 bit input and 14 bit output resolution Emission and noise immunity acc. To EN 61326 standard
New items
LKM400/4, LKMelectronic

LKM400/4, LKMelectronic

The LKMelectronic Temperature Transmitter is a digital, programmable transmitter for resistance sensors with 4 to 20mA current output. On request, this can be potted. Subsequent programming is only possible after consultation. By means of PC and programming cable sensor type and measuring range can be defined. It is operated in 3 wire circuit. Possible corrections to eliminate the line resistance can be made during programming. Solder tags connection Reverse polarity protected 16 bit input and 14 bit output resolution Emission and noise immunity acc. To EN 61326 standard
New items
LKM400/6, LKMelectronic

LKM400/6, LKMelectronic

The LKMelectronic Temperature Transmitter is a digital, programmable transmitter for resistance sensors with 4 to 20mA current output. On request, this can be potted. Subsequent programming is only possible after consultation. By means of PC and programming cable sensor type and measuring range can be defined. It is operated in 3 wire circuit. Possible corrections to eliminate the line resistance can be made during programming. Solder tags connection Reverse polarity protected 16 bit input and 14 bit output resolution Emission and noise immunity acc. To EN 61326 standard
New items
LKM436, LKMelectronic

LKM436, LKMelectronic

The LKMelectronic Temperature Transmitter was designed as a programmable over temperature switch for control systems. As soon as the switching point is reached, a potential free relay contact switches. With a program available free of charge, other parameters such as switching point, hysteresis and an optional self locking function can be set in addition to the sensor. Screw terminals clamping Better switching accuracy as 0.2 degree Celsius Operating and switching status display by LED Emission and immunity acc. To EN 61326 standard
New items
LKM437, LKMelectronic

LKM437, LKMelectronic

The LKMelectronic Temperature Transmitters was designed as a programmable over temperature switch for control systems. When the switching point is reached, a potential free relay contact switches. With a program available free of charge, in addition to the sensor, other parameters such as switching point, hysteresis and an optional self locking function can be set. Screw terminals clamping Operating and switching status display by LED Better drift of switching point as 0.1 degree Celsius Emission and immunity acc. To EN 61326 standard
New items
LKM 213/4, LKMelectronic

LKM 213/4, LKMelectronic

LKM 211 / 213 / 214 — Transducer for PT100 and Thermocouples Analogue temperature transducer for PT100 sensors and type J, K thermocouples Housing: EMG25, polycarbonate Sensor break and short-circuit detection EMC according to EN 50081-1 and EN 50082-2 General Loop voltage: 10 → 36 VDC Output: 4 → 20 mA, current loop resistant to inverted polarity Output: 0 → 10 V, protected against short-circuits Operating temperature: -40°C → +85°C Storage temperature: -40 °C → +120 °C LKM 211 for thermocouples, 4 → 20 mA Linearity fault: Fault reference junction: ±0.5 °C Sensor break: >20 mA LKM 213 for PT100, 4 → 20 mA 2, 3 or 4-conductor circuit Linearity fault: Alignment fault: ±0.1 °C Sensor break: >20 mA Sensor short-circuit: LKM 214 for PT100, 0 → 10 V 2, 3 or 4-conductor circuit Supply voltage: 18 → 36 VDC Power consumption: approx. 30 mA Load resistance: >5 kΩ Linearity fault: Alignment fault: ±0.1 °C Sensor break: >10 V Sensor short-circuit:
New items
LKM 103/4, LKMelectronic

LKM 103/4, LKMelectronic

Transducer for Terminal Head, Shape B (DIN) for PT100 and Thermocouples, Type K Analogue temperature transducer for PT100 sensors and type K thermocouples Screw terminals, clamping range 0.13 → 1.5 mm 2 Sensor break and short-circuit detection EMC according to EN 50081-1 and EN 50082-2 General Loop voltage: 10 → 36 VDC Output: 4 → 20 mA, current loop resistant to inverted polarity Output: 0 → 10 V, protected against short-circuits Operating temperature: -40°C → +85°C Storage temperature: -40 °C → +120 °C LKM 101 for type K thermocouples, 4 → 20 mA Sensor break: Linearity fault: Fault reference junction: ±0.5 °C LKM 103 for PT100, 4 → 20 mA 2 / 3-conductor circuit Linearity fault: Alignment fault: ±0.1 °C Sensor break: >20 mA Sensor short-circuit: LKM 104 PT100, 0 → 10 V 2-conductor circuit Supply voltage: 18 → 36 VDC Min. load resistance: 5 kΩ No-load current: max. 40 mA Linearity fault: Sensor break: >10 V Sensor short-circuit:
New items
LKM294, LKMelectronic

LKM294, LKMelectronic

The LKMelectronic Temperature Transmitter is a digital, configurable transmitter for mounting on the standard rail and can be set for various resistance sensors according to DIN EN 60751. It converts the temperature dependent resistance value of the sensor into a standard signal of 0 to 10V or inverse 10 to 0V. Four DIP switches can be used to set 16 different measuring ranges, one of which is freely programmable. Lead resistances are compensated by means of a four wire circuit. A three or two wire circuit can also be implemented. Screw terminals clamp Reverse polarity protected Offset can be set by software Emission and noise immunity acc. To EN 61326 standard