What are the shipping charges for products like Safety IO Modules?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

Where are your products like Safety IO Modules manufactured?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Safety IO Modules?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

How long will it take to receive the order that I placed for Safety IO Modules?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

Are your products Safety IO Modules in stock?

Yes. We keep updating our stock frequently and if a product like Safety IO Modules is not in stock then we will let you know.

Safety IO Modules | ASi Safety

New items

2TLA010033R0000, ABB

Pluto BT50 Series Failsafe/Expansion Relays By using an expansion relay from ABB, such as BT50, the number of safe outputs in Pluto can be easily expanded. Several expansion relays can be connected to a single Pluto safety output while retaining the safety category 4 level Quick and easy method of expanding safe outputs 35mm DIN rail mounting type Connection via screw terminals Safety Controller

Product Detail

New items

6EP4436-8XB00-0DY0, Siemens

The Siemens SITOP CNX8600 8x2.5 A expansion module output of 24 V DC or 8x 2.5 A outputs. Simultaneous connecting in of all outputs after device booting or delay time of 25 ms, 100 ms or load optimized for sequential cutting-in of the outputs via DIP switches at power supply unit can be set. 3-color LED for operating state module 3-color LED per output for operating state output Relay contact or changeover contact, contact current capacity DC 60 V and 0.3 A for Operating state OK at power supply unit PSU8600 Snaps onto DIN rail EN 60715 35x15 Suitability for interaction modular system Removable terminal at output Design of short-circuit protection- electronic overload cut-off

Product Detail

New items

XPSMCMEN0200, Schneider Electric

Your request could not be completed at this time

Product Detail

New items

772171, Pilz

PNOZmulti 2 Motion Monitoring Modules The PNOZ m EF *MM expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Two models are available: PNOZ m EF 1MM provides safe monitoring of one axis and PNOZ m EF 2MM provides safe monitoring of two independent axes. Features and Benefits Can be configured in the PNOZmulti Configurator Monitoring of 1 axis, stock no. 918-6617 Monitoring of two independent axes, stock no. 918-6611 Measured value recorded by proximity switch and encoder LED display for supply voltage, diagnostics, axis status and errors Support the safe drive function in accordance with EN 61800-5-2 Applications Safe speed monitoring (SSM) Safe speed range monitoring (SSRM) Safe direction of movement monitoring (SDIM) Safe operating stop monitoring (SOSM) Analogue voltage (track S) Standards EN ISO 13849-1 PLe; EN ISO 13849-1 Cat. 4; EN IEC 62061 SIL CL 3; IEC 61511 SIL 3. Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Screw terminals. Safety Controller

Product Detail

New items

3SK1211-1BB40, Siemens

SIRIUS 3SK1 Expansion Module The 3SK1 output expansion units are used to expand the enabling circuits. The maximum Performance Level PL / Cat. in accordance with ISO 13849-1, SILCL in accordance with IEC 62061, SIL in accordance with IEC 61508 corresponds to the Performance Level PL and SIL of the basic unit when the connection between basic unit and output expansion is configured as fail safe (e.g. basic unit and output expansion are connected using 3ZY12 device connector ). The output expansions can be activated via the supply voltage (A1/A2) or using 3ZY device connectors.The operating state of the 3SK1 output expansions is displayed on the LED. The output expansions 3SK1211(4RO) have four safety related enabling circuits as NO circuits, and the output expansions 3SK1213 (3RO) have three. They each have one positively driven NC circuit. The output expansions can be activated via any enabling circuit / output of the basic unit via (A1). The NC circuit 51/52 of 3SK1211 (4RO) or 41/42 of 3SK1213 (3RO) is used for monitoring the output expansions. In the 24 V DC variants, the expansion units can be activated and evaluated via the 3ZY device connectors.Output expansion 3SK1211 Slide switch for selecting the activation type (time delayed / instantaneous - for 24 Vdc variant only)1 LED for status display4 enabling circuits (safe circuits, NO contacts)1 NC circuit as feedback contact for output expansion 3SK1211 to the up-circuit basic unitEnclosure width 22.5 mmRemovable terminalsOutput expansion 3SK1213 Slide switch for selecting the activation type (time delayed / instantaneous - for 24 Vdc variant only)1 LED for status display3 enabling circuits (safe circuits, NO contacts)1 NC circuit as feedback contact for output expansion 3SK1213 for the up-circuit basic unitEnclosure width 90 mmRemovable terminalsNote ...

Product Detail

New items

NX-SOD400, Omron

Omron NX Standalone Safety Controller The NX series safety control units offer simple and flexible design for high-speed, high-precision motion control and safety control in an integrated engineering environment when used in conjunction with the NJ series machine automation controller and the automation software Sysmac Studio. This functionality contributes to productivity improvements and assurance of safety conforming to international standards and rules. Integrated safety into machine automation possible by connecting with the NX-series EtherCAT Coupler The Safety CPU Unit controls up to 128 Safety I/O Units 4 or 8 points per Safety Input Unit, the 4-point Safety Input Unit can be directly connected with OMRON Non-contact Switches and Single beam Sensors 2 or 4 points per Safety Output Unit, the 2-point Safety Output Unit is characterized by large output breaking current of 2.0 A The Safety Units can be freely allocated in any combination with standard NX I/O Compliant with IEC61131-3 Safety programs can be standardized and reused efficiently by using POUs for design and operation EN ISO13849-1 (PLe/Safety Category4), IEC 61508 (SIL3) certified One connection using Safety over EtherCAT (FSoE) protocol enables flexible configuration by mixing the Safety Units with standard NX I/O Hardware and safety circuits can be configured using the Sysmac Studio (Ver. 1.07) Safety Controller

Product Detail

New items

R1.190.1060.0, Wieland

The Wieland samosPRO IO-module has 8 non-safe inputs, 4 non-safe outputs and 4 configurable nonsafe I/O. It has pluggable push-in terminals. Spring clamp type connection available Inputs and outputs are configurable It has short circuit protection

Product Detail

New items

440R-ENETR, Allen Bradley Guardmaster

Allen-Bradley Guardmaster 440R-ENETR EtherNet/IP Network Interface The 440R-ENETR network interface allows Guardmaster Safety Relays (GSR) with embedded optical bus technology to seamlessly communicate on an EtherNet/IP network. The E/IP Interface gathers information from the GSR safety relays and helps minimise unplanned downtime and increase start-up efficiency. Up to six GSRs can be connected to a single network interface providing a compact solution for your application. As part of the Rockwell Automation Integrated Architecture, EtherNet/IP Network Interface provides comprehensive real-time terminal-level diagnostics (such as cross faults and over currents) making it simple to troubleshoot your application. Supports the DI, DIS, EM, EMD, GLP and GLT safety relays. Connectivity for Guardmaster Safety Relays to EtherNet/IP networks Optical link technology means no physical connectors Compliant with ODVA requirements for linear, star, and ring EtherNet/IP network topology Real-time terminal-level diagnostics of your safety system helps to minimize unplanned downtime Connect up to six Guardmaster safety relays on a single network interface Removable terminations accelerate commissioning No routing tables and network scheduling required Fast, simple configuration and integration Full add-on profile in Logix Designer, no other software is needed Slim, 22.5 mm wide DIN Rail mounted design

Product Detail

New items

PDM-IOP-4CC-IOP, Schmersal

Input expander / PDM For parallel IO devices Passive distribution module for series-wiring Cage clamps For up to 4 safety switchgears Fuse protected device ports For installation in terminal boxes Protection class IP00

Product Detail

New items

LG5925.48/61 AC/DC24V, Dold

LG 5925 - Emergency stop module, LG 5929 - Expansion module Applications Emergency stop and expansion modules for - Machine emergency stop switching - Monitoring sliding grill guards General data Safety category 4 in accordance with EN954-1 Operating status indicator 22.5 mm overall width Emergency stop module LG 5925.48 1 or 2-channel configuration Line termination recognition on the ON button with or without crossover recognition Expansion module LG 5929.60 Use only with a higher-level emergency stop module Redundant and force guided contacts 1-channel configuration Input Emergency stop module Expansion module Nom. voltage: 230 VAC or 24 VAC / DC 230 VAC or 24 VAC / DC Control voltage: 22 VDC at S11 with U N - Control current: 25 mA with U N 75 mA Output Contact assignment: 3 N/O / 1 N/C 5 N/O / 1 N/C Therm. current I th : 5 A max. 5 A max. Switching capability according to AC 15: - N/O: 3 A / 230 VAC - N/O: 3 A / 230 VAC - N/C: 2 A / 230 VAC - N/C: 2 A / 230 VAC Mechanical lifespan: >20 x 10 6 switching cycles >20 x 10 6 switching cycles General data Rated operating current type: Continuous operation Continuous operation Mounting: DIN rail DIN rail Housing material: Thermoplast Thermoplast Protection class: - Housing: IP40 - Housing: IP40 - Terminals: IP20 - Terminals: IP20 Dimensions (H x W x D): 22.5 x 90 x 121 mm 22.5 x 90 x 121 mm Weight: 220 g 205 g Ambient temperature: -15 °C → +55 °C -15 °C → +55 °C Approvals CE Standards EN 60204-1 (stop functions), EN 418, prEN574, prEN 954-1, IEC / EN 60204-01, EN 954-1

Product Detail

New items

SMS31, Carlo Gavazzi

The Carlo Gavazzi safety modules are designed in Category 4, performance Level e in accordance with the Machine Directive EN ISO 13849-1 to monitor and control safely the safety circuits in applications with emergency stops, safety gates, safety magnetic switches, safety limit switches and electromechanical interlocks. They are also used to control safely the safety circuits of the lift car levelling and the lift pit inspection, in compliance with the lifts standards EN81-20 and EN81-50. Multiple types inputs Machinery directive compliance. Cat. 4, PL e in accordance with EN ISO 13849-1 Lift directive compliance- EN81-20 and EN81-50 standards Multiple operating modes Electromechanical forcibly guided safety relays with 3NO+1NC Flexible wiring- Diagnostic- LED indications for power supply

Product Detail

New items

773603, Pilz

The Pilz decentralized passive distributor is designed for connecting PSENcode, PSENslock, and PSENini safety sensors to a Pilz control system. It supports a maximum of 4 sensors and features protection type IP67, making it dust-tight and water-resistant for reliable operation in harsh environments. This distributor ensures safe and efficient integration of sensors into automation systems. CE and UKCA listed Supply voltage is 24 V Screw interlocked terminal

Product Detail