Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 270

Showing Results For: Machine Guarding Accessories

Machine Guarding Accessories

Machine guarding accessories are the complete set of extra parts or components designed to provide adequate protection to the operators and prevent equipment from damage. These accessories and machine guarding are the first-line defense for the safety of workers. They protect in terms of physical barriers, for instance, a cage guard for protection against sparks or hazardous substances. 

Types of machines guarding accessories:

As the types of equipment being secured might vary greatly, machine guarding and accessories span a wide range. However, some common categories of accessories are given below:

  • locks and keys (for extra security)
  • labelling accessories
  • guards (with a range of sizes and shapes)
  • installation accessories for assisting the guards in setting up.

Typical Uses of machine guarding accessories:

  • The primary purpose of machine guarding is to protect the operator and others in the work area from hazards that may arise during machine operation. These include the risk of problems such as pinch points, cornering points, reciprocating, traversing, and splinters and sparks.
  • Some guards also provide safety to workers from shavings and flying shards of metal produced by working machines.
  • The machine guarding helps prevent cuts, lacerations, bumps, and abrasions. Without this protection, injuries can result in severe illness or death.

Note: Even if you think you can work faster without a guard on a machine, there is no good reason to remove it from your machine. The guards are there to protect you!


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
106833 LS-XG-ZBZ, Eaton
6 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.80
106831 LS-XFG-ZBZ, Eaton
14 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 27.67
106872 LS-XB-ZB, Eaton
42 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.08
106838 LS-XWA-ZBZ, Eaton
42 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.61
106839 LS-XW-ZBZ, Eaton
11 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.98
Schneider Electric
Rohs Verified
XCSZ100, Schneider Electric
8 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 4.14
Schneider Electric
Rohs Verified
XCSZR1, Schneider Electric
999997 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.72
Schneider Electric
XCSZ90, Schneider Electric
87 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 70.50
Rohs Verified
2TLA020007R1200, ABB
19 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 59.01
Schneider Electric
Rohs Verified
XCSZCR, Schneider Electric
75 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 10.00
Schneider Electric
Rohs Verified
XIOT11SE0MRCL, Schneider Electric
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 263.15
Schneider Electric
XY2CZ918, Schneider Electric
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 38.79
Rohs Verified
2TLA020054R1800, ABB
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 89.28
Schneider Electric
Rohs Verified
XY2CZ107, Schneider Electric
94 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 370.20
Schneider Electric
Rohs Verified
XY2CZ403, Schneider Electric
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 12.22
Rohs Verified
2TLA020005R1100, ABB
18 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 104.00
106839 & LS-XW-ZBZ, Eaton
28 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.80
106838 & LS-XWA-ZBZ, Eaton
13 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.80
106833 & LS-XG-ZBZ, Eaton
12 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.80
106831 & LS-XFG-ZBZ, Eaton
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 22.98
106872 & LS-XB-ZB, Eaton
86 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.08
106872 | LS-XB-ZB, Eaton
4 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.32
106839 | LS-XW-ZBZ, Eaton
17 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.40
106833 | LS-XG-ZBZ, Eaton
28 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.98
106838 | LS-XWA-ZBZ, Eaton
10 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 4.40
Showing
1 -

New Items
New items
2TLA020072R0000, ABB

2TLA020072R0000, ABB

ABB AS-i Safe Input Slave This professional ABB safe input slave are for AS-i bus and come with 1 safe input for dynamic sensors and are available with various amounts of non-safe outputs. Actuator Sensor Interface (AS-I) Actuator Sensor Interface, AS-I AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC. A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189 ) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used). By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours. The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network. Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments. Benefits of AS-I Replaces hard wiring High data speed Low cost installation Intelligent diagnostics Easy to learn and install Highly flexible Can connect to other fieldbus systems User-friendly Off-site pre-assembly and test Easy maintenance Faster on-site commissioning Host or stand alone use Able to...
New items
GKZ56, Honeywell

GKZ56, Honeywell

GKZ Series Accessories The GKZ series keys are designed to be used with the GKN series safety interlock switches. A variety of different style keys are available to choose from to suit many different applications. Interlock Switch
New items
2TLA020070R2000, ABB

2TLA020070R2000, ABB

Pluto Safety PLC, Base Unit Pluto from ABB is an "All-Master" safety PLC concept, which simplifies the design of safety systems and achieves the highest safety category 4 according to EN 954-1. All Pluto's are Master units and can see the other Pluto's inputs, outputs and global memories. This enables the Pluto to evaluate the information from the other Pluto's and then take decisions concerning its own safety devices. The Gateway units are available for several different bus systems, i.e. Profibus ( 733-4836 ), CanOpen ( 733-4830 ), Devicenet ( 733-4849 ) and Ethernet ( 733-4842 ). Of Pluto's inputs (the smallest unit has 16 I/O), thus can be configured as either inputs or outputs. In the Pluto family by ABB most modules have dual safety outputs - potential free or PNP types. In a two-wire bus system up to 32 Pluto units can be safely connected and communicate with a superior system via a Gateway or HMI displays. Therefore within a maximum extended system 1472 I/O's can be connected. Also all input components may be connected in series for even more complexity and optimisation. Simple and easy programming facilities Easy to configure and install Up to 640 I/O's Multiple Plutos can be connected on a bus (via using the IDFIX identifier) and then further interfaced with external networks by using a Gateway, typical example RS stock number ( 733-4842 ) High safety level Free software available Programming over the bus 35 mm DIN rail mounting The IDFIX ( 733-4824 ) is an identification circuit which allows multiple Plutos to be identified when connected on a bus system. This module is available to distribute a PLC program within a network of Pluto devices. Tina adapters such as ( 733-2477 ) can be used to connect external safety monitoring equipment Note The IDFIX device ( 733-4824 ) is connected between the input terminals ID and 0V (also note that the ID...
New items
140016, IDEM

140016, IDEM

IDEM Guardian Line Safety Rope Pull Accessories A range of accessories to support the Guardian Line rope pull switches. 826-4136 , 5m rope kit, 3 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4145 , 10m rope kit, 5 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4148 , 15m rope kit, 7 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4142 , 20m rope kit, 9 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4151 , 30m rope kit, 12 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4154 , 50m rope kit, 20 eyebolts, 1 tensioner/gripper, 1 Allen key 826-4158 , 80m rope kit, 30 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4167 , 100m rope kit, 37 eyebolts, 2 tensioner/grippers, 2 Allen keys 826-4160 , safety end spring 826-4164 , universal pulley (inside & outside corners) 826-4173 , cable gland, M20 x 1.5 123-7509 , Flexible Roller Eyebolt with Adjustment 123-7510 , Flexible Roller Eyebolt with Nuts
New items
RS_855-8282, Banner

RS_855-8282, Banner

Turck MINI-ARRAY Series The Turck Banner A-Gage MINI-ARRAY series of light screens can be used in a wide range of applications such as on-the-fly product sizing and profiling, Edge-guiding and centre guiding, Loop tensioning control, Hole detection, Parts counting, Die ejection verification and other similar uses. The MINI-ARRAY Series of measuring light screens are available in heights from 133 to 1819 mm depending on model and a offers programmable controller with a selection of measurement modes, Scan modes and output configurations. Features a low-profile, Programmable measuring light screen systems for inspections and profiling Offers emitters/receivers for detecting objects as small as 12.7 mm Available in models for central monitoring and control over a DeviceNet control network Includes advanced configuration software Light Curtain
New items
Omega mounting kit (M4000,C4000 Select), Sick

Omega mounting kit (M4000,C4000 Select), Sick

Device Column with External Mounting Grooves and Muting Accessories Device columns are used where there are problems mounting opto-electronic protective devices. On machining centres the opto-electronic protective devices must be positioned in the open room. An Entry/Exit system is often used at the gates for automatic material transport. The device columns with the 2 external mounting grooves in combination with the muting arms, brackets and protective plates ensure flexible attachment of the muting sensors. Protective field height of 300 to 1350mm Maximum installation length: 1720mm Column height: 1740mm Suitable for use with M2000, M4000, C2000, C4000 Note Mounting kits and muting arms must be purchased separately Light Curtain
New items
2TLA020056R2100, ABB Jokab

2TLA020056R2100, ABB Jokab

3 m cable 5 x 0,.34 mm2 + shield with straight M12-5 female + male connectors. Shield connected to pin3 (0V) on male connector.
New items
2TLA020056R2400, ABB Jokab

2TLA020056R2400, ABB Jokab

20 m cable 5 x 0.34 mm2 + shield with straight M12 female + male connectors. Shield connected to pin3 (0V) on male connector.
New items
2TLA020056R5100, ABB Jokab

2TLA020056R5100, ABB Jokab

3 m cable 8 x 0.34 mm2 + shield with straight M12-8 female + male connectors. Shield connected to pin7 (0V) on male connector.
New items
XCSZ05, Telemecanique

XCSZ05, Telemecanique

XCSA Safety Interlock Switch 3 positive opening contacts as standard (on guard opening) A key operated lock enables positive locking of the guard Optional version with orange LED to indicate guard open/closed Heavy duty metal DIN style Turret heads can be rotated through 360° in 90 steps 8 actuator entries and 1 tapped entry 20N minimum operating force for positive opening IP67 rating Productivity is increased due to the third contact dedicated to diagnostics Preventa XCS Safety Switches Note Actuators must be purchased separately, see accessories table Standards Conforms to EN1088, EN60204 Interlock Switch
New items
2TLA850102R5100, ABB

2TLA850102R5100, ABB

Enabling Switch, JSNA Series Professional range of ABB accessories from the JSNA series. Accessories include receptacle plates, shorting plugs, port blocks and pendant holsters. 3 Position 4 or 5 pole versions available Enabling Switch
New items
2TLA022312R1100, ABB

2TLA022312R1100, ABB

ABB Orion Light Grid Accessories A selection of accessories for the Orion Light Grids from ABB. 920-9647 - JSM Orion05 Rotation Brackets for Orion3, 4 piece 920-9641 - JSM Orion02 Standard Brackets for Orion3, 4 piece 920-9650 - JSM Orion08 Mounting Kit for Orion3, 4 piece 920-9653 - JSM Orion09 Mounting Kit for Orion3, 6 piece 920-9657 - Orion K050 Deviating Mirror in Stand, 1000mm 920-9666 - Orion K080 Deviating Mirror in Stand, 1200mm 920-9669 - Orion K090 Deviating Mirror in Stand, 1650mm 920-9663 - Orion K120 Deviating Mirror in Stand, 1650mm 920-9672 - Orion 060 Protective Stand, 600mm 920-9675 - Orion 100 Protective Stand, 1000mm 920-9679 - Orion 120 Protective Stand, 1200mm 920-9688 - Orion 165 Protective Stand, 1650mm 920-9681 - Orion 190 Protective Stand, 1900mm 920-9685 - Orion Adjustment Stand Plate Perimeter and Access Guard
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Machine Guarding Accessories and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Machine Guarding Accessories or any other product.
This depends on the Machine Guarding Accessories individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Machine Guarding Accessories and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Machine Guarding Accessories.
Yes. We keep updating our stock frequently and if a product like Machine Guarding Accessories is not in stock then we will let you know.