Steca

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity...

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity. How Much power? ...

Steca Solarix 4040 Solar Charge Controller Solar charge controller Steca Solarix 4040 is a newly developed product based on the internationally renowned controller family Steca PR. With increased module and load current, the solar charge controller is now also suitable for even larger systems. The Steca Solarix 4040 also features an integrated USB charging port for charging smartphones and tablets. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring. A large display informs you about all operating modes with the aid of symbols. The state of charge is represented visually as a level meter. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Integrated data logger (energy meter) Evening, night light and daylight functions Integrated self test Graphical LCD display: for operating parameters, fault messages, self test Electronic protection functions Overcharge protection Deep discharge protection Reverse polarity protection of module, load and battery Automatic electronic fuse Short circuit protection of load and module Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Overtemperature and overload protection Load disconnection on battery overvoltage Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated loc...

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity. How Much power? The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 d...

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity...

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity...

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity. How Much power? ...

Steca Solarix 4040 Solar Charge Controller Solar charge controller Steca Solarix 4040 is a newly developed product based on the internationally renowned controller family Steca PR. With increased module and load current, the solar charge controller is now also suitable for even larger systems. The Steca Solarix 4040 also features an integrated USB charging port for charging smartphones and tablets. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring. A large display informs you about all operating modes with the aid of symbols. The state of charge is represented visually as a level meter. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Integrated data logger (energy meter) Evening, night light and daylight functions Integrated self test Graphical LCD display: for operating parameters, fault messages, self test Electronic protection functions Overcharge protection Deep discharge protection Reverse polarity protection of module, load and battery Automatic electronic fuse Short circuit protection of load and module Overvoltage protection at module input Open circuit protection without battery Reverse current protection at night Overtemperature and overload protection Load disconnection on battery overvoltage Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated loc...

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity. How Much power? The daily power production of a solar panel can be calculated by multiplying the panel’s peak power rating by between 0.5 and 6 d...

Solar Charge Regulator Steca PR The Steca PR 10-30 series of charge controllers is the highlight in the range. Use of the latest charging technologies combined with state of charge determination enable optimal battery maintenance and module power monitoring for up to 900 Wp of connected power. A large display informs the user about all operating modes with the aid of symbols. The state of charge is represented visually in the form of a tank display. Data such as voltage, current and state of charge can also be displayed digitally as figures on the display Hybrid controller State of charge determination with Steca AtonIC (SOC) Automatic detection of voltage PWM control Multistage charging technology Load disconnection depending on SOC Automatic load reconnection Temperature compensation Common positive or negative grounding on one terminal Integrated data logger / energy meter Night light and morning light function Integrated self test Monthly maintenance charge Safety Features: Electronic fuse, protection against overcurrent, overvoltage and overtemperaturer Protection against wrong polarity and short circuit Extremly low electromagnetic emission Solar Panels and Chargers Solar “photovoltaic” panels use the power of the sun to generate electricity and can be used in a variety of applications from calculators to homes. They are most effective, versatile and cost saving in many commercial and leisure applications for charging 12/24V batteries. Solar panels provide power through batteries at off grid and isolated locations and are widely used in critical telecommunications and telemetry applications. Solar panels enable rapid installation of equipment at remote sites, either temporary or permanent, avoiding the costs and inconvenience of grid connection. They are designed for very low maintenance and longevity...

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter

Steca Solarix PI In developing the Solarix PI sine wave inverter, Steca has brought about some innovations which are unprecedented in this form. These are, above all, parallel connection, the novel operating concept which uses a single rotary switch, direct communication in order to calculate the state of charge (SOC) with Steca Tarom and Steca Power Tarom, and the electronic fuse. Furthermore, our many years of experience have come into play for deploying these inverters specifically in photovoltaic systems. This comes through, for instance, in the way that a most diverse range of appliances is provided with a low operating consumption and a stable energy supply True sine wave voltage Can be connected to the Steca Power Tarom with a Steca PAx4 parallel switch box Excellent overload capabilities Optimal battery protection Automatic load detection Parallel connectable Best reliability Protective insulation according to protection class II Control by digital signal processor (DSP) Electronic protection functions Deep discharge protection Battery overvoltage shutdown Overtemperature and overload protection Short circuit protection Reverse polarity protection Automatic electronic fuse Displays Multi-coloured LeD shows operating states Sine Wave Inverter