Featured Products
HS10 Soldering Wire The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quali...
Stannol Kristall series Stannol Kristall solder wires have been specially formulated to complement No Clean wave an...
Sn62Pb36Ag2 soldering wire, HS10/HF32 Sn62Pb36Ag2 alloy, solder with low melting point In contrast with other alloys, already solidus at 179 °C...
HS10 Soldering Wire The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was...
Trapezoidal soldering rod, Stannol Sn60Pb40 Highly pure soldering alloy—60% tin, 40% lead—ideal for solderi...
HF32 Soldering Wire, Sn60Pb39Cu1 Sn60Pb39Cu1 alloy with flux core Reduced wear of soldering iron tips, thus more productive soldering of copper...
HF32 Soldering Wire, Sn60Pb39Cu1 Sn60Pb39Cu1 alloy with flux core Reduced wear of soldering iron tips, thus more productive soldering of copper...
HS10 Soldering Wire The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was...
Stannol Kristall series Stannol Kristall solder wires have been specially formulated to complement No Clean wave an...
Stannol Kristall series Stannol Kristall solder wires have been specially formulated to complement No Clean wave an...
PCB holder, helping hand PCB holder for support during small assembly and soldering tasks Stable cast-iron...
Stannol Trilence series The Trilence flux system has been designed for demanding soldering tasks in automated solde...
Popular Categories For Stannol
Popular Items
Popular items
520441, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
Popular items
810791, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
Popular items
639005, Stannol
Sn62Pb36Ag2 soldering wire, HS10/HF32
Sn62Pb36Ag2 alloy, solder with low melting point
In contrast with other alloys, already solidus at 179 °C — useful for repairs to manufactured PCBs
Thanks to careful temperature control, heat damage can be reduced to a minimum
Extraordinary wetting and flow capabilities
Silver content prevents leaching out when welding silver-plated surfaces, as well as preventing brittling, making for significantly more stable welds
Filling weight of 2.5%, HF version 3.5%
Standards
EN ISO 9453:2006
Popular items
599103, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
Popular items
310510, Stannol
Trapezoidal soldering rod, Stannol Sn60Pb40
Highly pure soldering alloy—60% tin, 40% lead—ideal for soldering baths and soldering pots
Less slag is produced during the initial melting due to the lack of oxides and other undesirable elements
More soldering joints per soldering weight and better wetting is achieved
Solid at 183 °C, liquid at 215 °C.
Cross-section 6 x 5.5 x 4 mm, weight per rod 48 g, length 210 mm
Standards: EN ISO 9453:2006
Leaded Stick Solder
Popular items
639004, Stannol
HF32 Soldering Wire, Sn60Pb39Cu1
Sn60Pb39Cu1 alloy with flux core
Reduced wear of soldering iron tips, thus more productive soldering of copper wires
Solidus at 183 °C, liquidus at 215 °C
Flux content of 3.5%
Standards
EN ISO 9453:2006
Popular items
639002, Stannol
HF32 Soldering Wire, Sn60Pb39Cu1
Sn60Pb39Cu1 alloy with flux core
Reduced wear of soldering iron tips, thus more productive soldering of copper wires
Solidus at 183 °C, liquidus at 215 °C
Flux content of 3.5%
Standards
EN ISO 9453:2006
Popular items
599105, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
Popular items
810797, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
Popular items
810811, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
Popular items
261417, Stannol
PCB holder, helping hand
PCB holder for support during small assembly and soldering tasks
Stable cast-iron stand, 50 x 50 mm
All-metal design, with sliding arm and clips
Version with 60 mm magnifying glass for improved visibility
Dimensions (W x H): 260 x 190 mm, clip width 10 mm
PCB Assembly Equipment
Popular items
570001, Stannol
Stannol Trilence series
The Trilence flux system has been designed for demanding soldering tasks in automated soldering processes. Due to its optimised properties, the flux system is also suitable for manual soldering and rework.
The Trilence flux system has been designed for demanding soldering tasks in automated soldering processes. Due to its optimised properties, the flux system is also suitable for manual soldering and rework.
Trilence solder wires can be used as conventional solder wires. Thanks to its low tendency of spitting, transparent residues and high thermal capacity, the Trilence wire produces clean solder joints. As there is nearly no spitting, your soldering machine requires less servicing and you have fewer shutdown periods.
Features & Benefits
Minimum spitting
Good wetting properties
Transparent residues
New Items
New items
520441, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
New items
810791, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
New items
639005, Stannol
Sn62Pb36Ag2 soldering wire, HS10/HF32
Sn62Pb36Ag2 alloy, solder with low melting point
In contrast with other alloys, already solidus at 179 °C — useful for repairs to manufactured PCBs
Thanks to careful temperature control, heat damage can be reduced to a minimum
Extraordinary wetting and flow capabilities
Silver content prevents leaching out when welding silver-plated surfaces, as well as preventing brittling, making for significantly more stable welds
Filling weight of 2.5%, HF version 3.5%
Standards
EN ISO 9453:2006
New items
599103, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
New items
310510, Stannol
Trapezoidal soldering rod, Stannol Sn60Pb40
Highly pure soldering alloy—60% tin, 40% lead—ideal for soldering baths and soldering pots
Less slag is produced during the initial melting due to the lack of oxides and other undesirable elements
More soldering joints per soldering weight and better wetting is achieved
Solid at 183 °C, liquid at 215 °C.
Cross-section 6 x 5.5 x 4 mm, weight per rod 48 g, length 210 mm
Standards: EN ISO 9453:2006
Leaded Stick Solder
New items
639004, Stannol
HF32 Soldering Wire, Sn60Pb39Cu1
Sn60Pb39Cu1 alloy with flux core
Reduced wear of soldering iron tips, thus more productive soldering of copper wires
Solidus at 183 °C, liquidus at 215 °C
Flux content of 3.5%
Standards
EN ISO 9453:2006
New items
639002, Stannol
HF32 Soldering Wire, Sn60Pb39Cu1
Sn60Pb39Cu1 alloy with flux core
Reduced wear of soldering iron tips, thus more productive soldering of copper wires
Solidus at 183 °C, liquidus at 215 °C
Flux content of 3.5%
Standards
EN ISO 9453:2006
New items
599105, Stannol
HS10 Soldering Wire
The electronic solder wire HS10 is a proven and reliable product of Stannol research, which was developed to meet high-quality requirements in industrial electronic production and for quick rework. The solder wire HS10 is efficient by its high activity, which results in quick spread of solder and electrical safe residues. It is a halide activated rosin (colophony) flux. The solder wire HS10 conforms to IEC 61190-1-3 type ROM1
Features & Benefits
Solid and dry residues, pin testable
Fast soldering, high spread speed
High reliability
Soldering Wire, SN60Pb40 alloy with a flux core
Well suited to high-quality works, at low melting temperature
Solidus at 183°C, liquidus at 188°C
Flux of 2.5% type 1.1.2B / ROM1
Standards
EN ISO 9453:2006
New items
810797, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
New items
810811, Stannol
Stannol Kristall series
Stannol Kristall solder wires have been specially formulated to complement No Clean wave and reflow soldering processes. They are also applicable to repair operations carried out after a cleaning process, eliminating the need for further cleaning. Stannol Kristall solder wires provide fast soldering on copper and brass surfaces and solder coated materials. Activity of the halide activated versions on nickel is also good depending on the state of oxidation of the nickel finish. The good thermal stability of Stannol Kristall fluxes means that they are also suited to soldering applications requiring high melting temperature alloys. The resin and flux systems are designed to leave relatively low residues and to minimise residual activity. This is achieved by ensuring some decomposition and volatilisation takes place during the soldering process. In some situations, this may generate visible fuming but in all cases, rosin fumes must be removed from the breathing zone of operators.
Features & Benefits
Fast soldering (wide range of activities to suit all applications)
Good spread (on copper, brass and nickel)
Clear residues
Heat stable (low spitting)
Mild odour
New items
261417, Stannol
PCB holder, helping hand
PCB holder for support during small assembly and soldering tasks
Stable cast-iron stand, 50 x 50 mm
All-metal design, with sliding arm and clips
Version with 60 mm magnifying glass for improved visibility
Dimensions (W x H): 260 x 190 mm, clip width 10 mm
PCB Assembly Equipment
New items
570001, Stannol
Stannol Trilence series
The Trilence flux system has been designed for demanding soldering tasks in automated soldering processes. Due to its optimised properties, the flux system is also suitable for manual soldering and rework.
The Trilence flux system has been designed for demanding soldering tasks in automated soldering processes. Due to its optimised properties, the flux system is also suitable for manual soldering and rework.
Trilence solder wires can be used as conventional solder wires. Thanks to its low tendency of spitting, transparent residues and high thermal capacity, the Trilence wire produces clean solder joints. As there is nearly no spitting, your soldering machine requires less servicing and you have fewer shutdown periods.
Features & Benefits
Minimum spitting
Good wetting properties
Transparent residues
Don’t hesitate to ask questions for better clarification.