Featured Products
KIH40 Incremental Encoder Professional range of Kubler incremental encoders from the KIH40 series. The encoders have optical technology that has...
6 Digit Multifunction, Backlit LCD Display Counter, Tachometer and Timer all in one device Can be used as a...
Rack and Pinion A complete solution for quick and easy linear measurement The rotary transducer holder ensures opti...
Codix 54U Multipurpose Device with Dual Function 4x dual functions in one device Operating modes: Electron...
6 Digit Multifunction, Backlit LCD Display Counter, Tachometer and Timer all in one device Can be used as a...
Codix 565 - Temperature Controller The process controller Codix 565 with totaliser function displays V and...
Non Reset Totalising Counters Magnifying lens increases readout to 4mm Retains count during power failure U...
Miniature cable pull sensor, analogue Miniature cable pull sensor with analogue output For length or distan...
Kuebler HK17 Series - Hour Meters HK17 Hour Meters feature a very high shock resistance, they can be used in many d...
Popular Categories For Kubler
Popular Items
Popular items
Popular items
8.KIH40.5442.2048, Kubler
KIH40 Incremental Encoder
Professional range of Kubler incremental encoders from the KIH40 series. The encoders have optical technology that has been designed for high-cost effectiveness. Resolutions of up to 2500 Pulses per revolutions available. The encoders are ideal for tight mounting spaces and small machines and appliances.
Radial Cable
Push-Pull or RS422 output circuit
Popular items
6.924.0103.000, Kubler
6 Digit Multifunction, Backlit LCD Display
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD display with green backlight
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter settings
Tracking presets eliminate the need for reprogramming of the pre-signal
4 stage RESET modes and 3 stage key lockout
Kubler Panel Mounting 48 x 48 - Electronic Counters
Range of Resettable Counters / Timers / Rate Meters. All have 45 x 45mm panel cut out and are sealed to IP65 (front fascia). Data retention greater than 10 years.
Popular items
Popular items
8.0000.6901.0003, Kubler
Rack and Pinion
A complete solution for quick and easy linear measurement
The rotary transducer holder ensures optimum loading of the transducer shaft on the gear rack
Longitudinal measurement kit with rack and pinion
Typical System Requirements
1 x rotary transducer type 5810
1 x pre-assembled cable 3m and 5 way mating connector
1 x rotary transducer holder
1 x single pre-set counter 716 90-250Vac or 1 x dual pre-set counter 717
1 x Pinion 16 teeth
Inter Rack link (optional)
Rack
Technical Specification - Encoders
Type
Max Axial Load (N)
Weight (g)
Material
Max Pulse Fequency
Signal type
Supply voltage (Vdc)
5810
40
400
Stainless steel
2kHz
Push - Pull
10 - 30
Popular items
6.924.0101.300, Kubler
6 Digit Multifunction, Backlit LCD Display
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD display with green backlight
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter settings
Tracking presets eliminate the need for reprogramming of the pre-signal
4 stage RESET modes and 3 stage key lockout
Kubler Panel Mounting 48 x 48 - Electronic Counters
Range of Resettable Counters / Timers / Rate Meters. All have 45 x 45mm panel cut out and are sealed to IP65 (front fascia). Data retention greater than 10 years.
Popular items
6.54U.012.000, Kubler
Codix 54U Multipurpose Device with Dual Function
4x dual functions in one device
Operating modes: Electronic totaliser and frequency counter; counter with 2 totalising ranges; totaliser and timer; timer with 2 time ranges
Separate multiplication and scaling factor for pulse and frequency counter
Reset time: 5ms
Count frequency: 60kHz (can be damped to 30kHz)
Data retention via internal Eeprom
Popular items
6.565.010.000, Kubler
Codix 565 - Temperature Controller
The process controller Codix 565 with totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values.
These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to- understand running help texts and a practical quick-start guide eliminate the need to wade through time-consuming full instruction manuals.
6-digit display, 14-segment LED, 14 mm high
Simple programming via 4 keys on the front
One front key as well as 2 additional inputs can be programmed for specific applications
Sampling rate of 10 readings per second
Time-controlled totaliser function for totalising the measured values. Can be reset separately
MIN/MAX memory function, individually resettable
Customer-specific characteristic (linearization) curve via 12 control points for all measurement signal inputs
2 relay outputs (changeover contacts) for limit monitoring with hysteresis and ON/OFF delay function for current measured or totaliser values
Inputs and outputs galvanically isolated
Digital filter (first-order) for smoothing display fluctuations with unstable input signals
Wide range of supply voltage 10 → 30 Vdc/90 → 260 Vac
Wide input range: 0/4-20mA, 0/2-10 Vdc, +/-10V
Kubler Controller
Popular items
1.130.920.012, Kubler
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Popular items
8.0000.15FS.1212, Kubler
Sendix SIL 5814FS2 / 5834FS2 (Shaft / Hollow Shaft)
The incremental encoders 5814FS2 and 5834FS2 of the Sendix SIL family are suited for use in safety-related applications, specially in the field of safe drive technology.
Safety-Lock™ Design
High rotational speed
Shaft and hollow shaft versions
High shaft load capacity
Shock and vibration resistant
Magnetic field proof
Optical sensor
Incremental SinCos tracks
Reverse polarity protection
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Popular items
Popular items
8.3700.1322.0050, Kubler
Solid/Hollow Shaft
Supply voltage 5-30Vdc
Permissible Max. Load (mA)
20
Pulse Frequency (kHz)
250 (Max)
Radial Shaft Load (N)
20
Short Circuit Protection
Yes
Torque (Nm)
0.2
Weight (kg)
0.1
Body Diameter (mm)
37
Axial Shaft Load (N)
10
Body-Housing Material
Composite PPA
Cable Length (m)
1
Flange Material
40 % KF (Carbon Fibre)
IP Rating (Housing)
IP67
IP Rating (Shaft)
IP65
Maximum Speed (rpm)
6000
Moment Of Inertia
0.1 x 10
6
Kgm
2
(Rotor)
Operating Temperature Range (°C)
-20 → +80
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
New Items
New items
8.KIH40.5442.2048, Kubler
KIH40 Incremental Encoder
Professional range of Kubler incremental encoders from the KIH40 series. The encoders have optical technology that has been designed for high-cost effectiveness. Resolutions of up to 2500 Pulses per revolutions available. The encoders are ideal for tight mounting spaces and small machines and appliances.
Radial Cable
Push-Pull or RS422 output circuit
New items
New items
New items
6.924.0103.000, Kubler
6 Digit Multifunction, Backlit LCD Display
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD display with green backlight
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter settings
Tracking presets eliminate the need for reprogramming of the pre-signal
4 stage RESET modes and 3 stage key lockout
Kubler Panel Mounting 48 x 48 - Electronic Counters
Range of Resettable Counters / Timers / Rate Meters. All have 45 x 45mm panel cut out and are sealed to IP65 (front fascia). Data retention greater than 10 years.
New items
8.0000.6901.0003, Kubler
Rack and Pinion
A complete solution for quick and easy linear measurement
The rotary transducer holder ensures optimum loading of the transducer shaft on the gear rack
Longitudinal measurement kit with rack and pinion
Typical System Requirements
1 x rotary transducer type 5810
1 x pre-assembled cable 3m and 5 way mating connector
1 x rotary transducer holder
1 x single pre-set counter 716 90-250Vac or 1 x dual pre-set counter 717
1 x Pinion 16 teeth
Inter Rack link (optional)
Rack
Technical Specification - Encoders
Type
Max Axial Load (N)
Weight (g)
Material
Max Pulse Fequency
Signal type
Supply voltage (Vdc)
5810
40
400
Stainless steel
2kHz
Push - Pull
10 - 30
New items
6.54U.012.000, Kubler
Codix 54U Multipurpose Device with Dual Function
4x dual functions in one device
Operating modes: Electronic totaliser and frequency counter; counter with 2 totalising ranges; totaliser and timer; timer with 2 time ranges
Separate multiplication and scaling factor for pulse and frequency counter
Reset time: 5ms
Count frequency: 60kHz (can be damped to 30kHz)
Data retention via internal Eeprom
New items
6.924.0101.300, Kubler
6 Digit Multifunction, Backlit LCD Display
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD display with green backlight
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter settings
Tracking presets eliminate the need for reprogramming of the pre-signal
4 stage RESET modes and 3 stage key lockout
Kubler Panel Mounting 48 x 48 - Electronic Counters
Range of Resettable Counters / Timers / Rate Meters. All have 45 x 45mm panel cut out and are sealed to IP65 (front fascia). Data retention greater than 10 years.
New items
6.565.010.000, Kubler
Codix 565 - Temperature Controller
The process controller Codix 565 with totaliser function displays V and mA analogue input signals in high resolution. In addition it can monitor and control 2 limit values.
These fast displays set new standards when it comes to user friendliness. Their easy-to-read 14-segment LED display, easy-to- understand running help texts and a practical quick-start guide eliminate the need to wade through time-consuming full instruction manuals.
6-digit display, 14-segment LED, 14 mm high
Simple programming via 4 keys on the front
One front key as well as 2 additional inputs can be programmed for specific applications
Sampling rate of 10 readings per second
Time-controlled totaliser function for totalising the measured values. Can be reset separately
MIN/MAX memory function, individually resettable
Customer-specific characteristic (linearization) curve via 12 control points for all measurement signal inputs
2 relay outputs (changeover contacts) for limit monitoring with hysteresis and ON/OFF delay function for current measured or totaliser values
Inputs and outputs galvanically isolated
Digital filter (first-order) for smoothing display fluctuations with unstable input signals
Wide range of supply voltage 10 → 30 Vdc/90 → 260 Vac
Wide input range: 0/4-20mA, 0/2-10 Vdc, +/-10V
Kubler Controller
New items
1.130.920.012, Kubler
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
New items
New items
D5.3501.A111.0000, Kubler
Miniature cable pull sensor, analogue
Miniature cable pull sensor with analogue output
For length or distance measurement in machine and
plant construction
Tried and proven, manageable solution
Converts linear movements by extending and retracting a cable into rotational motions
Compact
Measurement length up to 1000 mm
Robust design
Simple evaluation with digital display via
analogue signal
Low-cost alternative to the rotary transducer design
Current or voltage output
Dimensions: 74 x 43 x 40 mm
Steel cable, plastic-coated
Power supply 15 V DC to 28 V DC
Potentiometer
Electrical characteristic values
Analogue output
0 V-10 V
4 mA-20 mA
Potentiometer 10 KΩ
Power supply
15-28 V DC
Temperature range
0 °C → +50 °C
Load
Max. 500 Ω
Cable colour at output
Brown
24V DC
Plus
Initial position
White
GND
Minus
Final position
Green
Vout
Minus
Loop contact
Mechanical characteristic values of cable pull sensor
Measurement range:
Up to 1000 mm
Absolute accuracy
±0.1%
Resolution:
Analogue output signal
1 m equal to 0 to 10 V DC
1 m equal to 4 to 20 mA
1 m equal to 0 to 10 kOhm
Traversing speed:
max. 800 mm/s
Required extraction force:
approx. 2 N (at cable)
Weight:
approx. 0.210 kg
Cross-reference to manufacturer's part number
Stock no.
Manuf. Part no.
Stock no.
Manuf. Part no.
447-6209
D5.3501.A111.0000
447-6265
8.0000.7000.0033
447-6192
D5.3501.A221.0000
447-6259
8.0000.7000.0034
447-6186
D5.3501.A331.0000
447-6164
8.0000.7000.0035
447-6293
8.0000.7000.0031
New items
3.130.251.351.056, Kubler
Kuebler HK17 Series - Hour Meters
HK17 Hour Meters feature a very high shock resistance, they can be used in many different fields of application.
7-digit Hour Meter
without reset
Hight of figures 3.8 mm
High shock resistance
Small dimensions
Cut out size 22x33 mm
Protection IP65 on the front side
Different voltage types available:
- 10-30V DC - stock no.
309-6060
- 100-130V (60Hz) - stock no.
915-5935
- 187-264V (50Hz) - stock no.
309-6098
- 100-130V (60Hz) - stock no.
915-5910
Applications:
- General time measurement
- Maintenance intervals for medical equipment
- UV lamps
- Display panels in vehicles
Don’t hesitate to ask questions for better clarification.