Featured Products
PSS Restraint Titan Rope Lanyard 1 m MOB.PLATF PSS PA 3 Titan restraint rope lanyard is 1 m long and comes equipped...
Titan Restraint Kit Restraint Kit with a 1 point Titan harness (dorsal D ring, with fast release buckles and adjust...
Miller Kernmantel Forked Restraint Lanyard Miller kernmantel forked restraint lanyard complete with one aluminium t...
PSS Restraint Lanyard WK Position 2 m PSS WK Position 2 m restraint lanyard is a 12 mm rope adjustable lanyard with...
PSS 2 Point Titan Harness PSS 2 point Titan harness is a perfect for all as it is a one size harness. The 2...
PSS Titan Web Anchorage Sling PAM080 PSS Titan web anchorage sling (PAM080) made from polyamide orange and black we...
PSS Falcon 10 m Cable Galva Self Retracting Lifeline PSS Falcon 10 m cable self-retracting lifeline is one...
PSS Titan Scaffolding Kit The Titan scaffolding kit is a complete kit which provides the protection needed when wor...
PSS Turbolite 2M Web Self Retracting Webbing Lifeline PSS Turbo-lite 2 m self-retracting webbing lifeline is an alt...
PSS Web Shock Lanyard PSS web shock ABS 2 m scaffolding lanyard. The lanyard is complete with a shock absor...
PSS Web Mobile Lifeline The Web mobile lifeline is a valuable piece of fall arrest equipment providing you with a 2...
Miller H Design Hi-Vis Vest Harness Miller H-Design Hi-Vis vest and harness have been designed to use with the H-De...
Popular Categories For Miller By Honeywell
Popular Items
Popular items
1031453, Miller By Honeywell
PSS Restraint Titan Rope Lanyard 1 m MOB.PLATF
PSS PA 3 Titan restraint rope lanyard is 1 m long and comes equipped with 1 screwgate karabiner.
ROPE:
3 Strand polyamide rope
Breaking strength 2200 daN
CS20 CONNECTOR:
Steel
Opening 17 mm
Weight 0.165 kg
Dimensions 104 x 58 mm
SCAFF HOOK CONNECTOR:
Steel
Opening 50 mm
Weight 0.165 kg
Dimensions 218 x 115 mm
Temperature range -30°C to +50°C
Standards
EN 354
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders mu...
Popular items
1011897, Miller By Honeywell
Titan Restraint Kit
Restraint Kit with a 1 point Titan harness (dorsal D ring, with fast release buckles and adjustable leg straps), a 2m restraint lanyard and 2 karabiners. Suitable for roof maintenance. Easy to use, the kit contains all the essentials for Restraint.,1 point Titan Harness: blue with black line webbing, made from polyamide. Width: 45mm.,Dorsal D Ring: made from stainless steel.,Fast Release Buckles: made from galvanised steel. Weight: 0.500kg, breaking strength: >15daN.,2m Restraint Lanyard: made from 12mm polyamide rope.,Karabiners: made from stainless steel. Opening: 18mm, breaking strength: 2500daN.
Standards
Harness: EN 361, Lanyard: EN 354, Karabiners: EN 362.
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;...
Popular items
1032354, Miller By Honeywell
Miller Kernmantel Forked Restraint Lanyard
Miller kernmantel forked restraint lanyard complete with one aluminium twist lock karabiner and two GO60 aluminium scaffold hooks. The kernmantel is a new design and made with a light green rope with black stripes. The colours making the rope visible from a distance plus increasing the safety at work. The stitches in the rope are also highly visible which ensures a safety check before use. Restraint lanyards restrict a workers movement which prevents reaching areas where a fall hazard exists. The rope used in this kernmantel is two times more abrasion resistant than standard ropes.
FEATURES and BENEFITS:
Forked restraint lanyard
1 Aluminium twist lock karabiner
2 GO60 aluminium scaffold hooks
Light green rope with black stripes
Highly visible stitches
2 times more abrasion resistance
Restricts movement
1 m long
Weight 0.799 kg
Breaking strength 22 KN
TWIN LOCK KARABINER:
Connector – Aluminium
Connector opening – 18 mm
Connector breaking strength – 23 KN
GO60 SCAFF HOOKS:
Connector – Aluminium
Connector opening – 60 mm
Connector breaking strength – 23 KN
APPLICATIONS:
Building
Construction
Utilities
Standards
EN 632, EN 354, EN 358
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high fal...
Popular items
1031451, Miller By Honeywell
PSS Restraint Lanyard WK Position 2 m
PSS WK Position 2 m restraint lanyard is a 12 mm rope adjustable lanyard with 2 alloy karabiner with a 20 mm opening.
ROPE:
ROPE:
100% polyamide
12 mm diameter
Breaking strength 2200 daN
TWIST LOCK KARABINERS:
Alloy
Opening 20 mm
Dimensions – 123 x 70 mm
Breaking strength 2200 daN
Weight 0.45 kg
Standards
EN 358
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders must ensure:
Schedules
existing places of work and means o...
Popular items
1031440, Miller By Honeywell
PSS 2 Point Titan Harness
PSS 2 point Titan harness is a perfect for all as it is a one size harness. The 2 point harness is complete with a dorsal D-ring and frontal webbing loops including fast release buckles and adjustable leg straps.
FEATURES and BENEFITS:
One size fits all
Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Includes fast release buckles made from galvanised steel
Weight 0.5 kg
Temperature range -30°C to +50°C
Static test 15 KN
Standards
EN 361
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
...
Popular items
1031460, Miller By Honeywell
PSS Titan Web Anchorage Sling PAM080
PSS Titan web anchorage sling (PAM080) made from polyamide orange and black webbing. The sling is 25 mm wide and has a breaking strength of 22 KN.
FEATURES and BENEFITS:
Anchorage sling
PAM080
Polyamide webbing
Width 25 mm
Weight 0.08 kg
Breaking strength 22 KN
Standards
EN 795, EN 566
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders must ensure:
Schedules
existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and w...
Popular items
1031447, Miller By Honeywell
PSS Falcon 10 m Cable Galva Self Retracting Lifeline
PSS Falcon 10 m cable self-retracting lifeline is one of the safest and robust retractable lifelines. ECO range is supplied with a karabiner at the top plus is equipped with a swivel snap hook. The snap hook has a fall indicator at the bottom of the cable and a steel spring.
FEATURES and BENEFITS:
10 M Galva
Galvanised wire rope
Housing of high impact nylon
Hub is heat treated aluminium
Braking mechanism is stainless steel and bronze
Dimensions: 255 x 213 x 101 mm
Weight 4.05 kg
Cable lifeline – 4.5 mm diameter galvanised
Cable supplied with a double ferrule
Zinc plated steel, double locking snap hook
Swivel snap hook with 22 mm opening
Standards
EN 360
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling...
Popular items
1031433, Miller By Honeywell
PSS Titan Scaffolding Kit
The Titan scaffolding kit is a complete kit which provides the protection needed when working on scaffolding. The kit consists of a 1 point Titan harness with a dorsal D-ring and Titan 2 m shock absorbing lanyard.
HARNESS
:
Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Fast release buckles made from galvanised steel
Static test 15 KN
Standard EN 361
SHOCK ABSORBING LANYARD 2 m:
Made from polyester
Width 30 mm
SHOCK ABSORBER / SCAFF HOOK:
SHOCK ABSORBER:
Made from polyamide
34 mm wide
SCAFF HOOK:
Made from steel
Opening off 63 mm
KARABINERS:
Made from galvanised steel
Opening of 18 mm
Breaking strength 15 KN
Standards EN 355
Standards
EN 361, EN 355
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropri...
Popular items
1031446, Miller By Honeywell
PSS Turbolite 2M Web Self Retracting Webbing Lifeline
PSS Turbo-lite 2 m self-retracting webbing lifeline is an alternative to shock absorbing lanyards used in fall factor 2. The life line is excellent for use in all situations when working with low space clearance plus can be used on both ways around.
FEATURES and BENEFITS:
Housing impact resistant nylon
Stainless steel breaking system
Vectram webbing – 25.4 x 1.5 mm
SRL length – 2 m
Steel twist lock karabiner opening 18 mm
Aluminium scaff hook opening 65 mm
Shock absorber when fully deployed –max length 60 cm
Maximum rated load 136 kg (use in up anchorage point)
100 kg (use in down level)
Temperature range -30°C to +50°C
Standards
EN 360
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly contro...
Popular items
1031452, Miller By Honeywell
PSS Web Shock Lanyard
PSS web shock ABS 2 m scaffolding lanyard. The lanyard is complete with a shock absorber, scaff hook and karabiner.
LANYARD:
Polyester
Width 30 mm
SHOCK ABSORBER:
Polyamide
Width 34 mm
SCAFF HOOK:
Steel
Opening 63 mm
KARABINER:
Galvanised steel
Opening 18 mm
Breaking strength 15 KN
Weight 0.95 kg
Standards
EN 355
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
...
Popular items
1031456, Miller By Honeywell
PSS Web Mobile Lifeline
The Web mobile lifeline is a valuable piece of fall arrest equipment providing you with a 20 m horizontal adjustable lifeline. The lifeline is supplied in a bag complete with two slings.
WEBBING HORIZONTAL LIFELINE:
Adjustable from 5 m to 20 m
Breaking strength 20 KN
Maximum deflection 2 m
EN 795 class b
Weight 5.54 kg
Temperature range of minus 30°C to plus 50°C
Supplied in a bag
WEBBING:
Polyester 35 mm
Breaking strength 4500 daN
WEBBING ADJUSTER:
Biochromate steel adjuster
Breaking strength 1500 daN
TEXTILE SLING:
Orange and black webbing
Made from polyamide
Width 25 mm
EN 795 / EN 566
Standards
EN 795 class b, EN 795 / EN 566
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;...
Popular items
1032918, Miller By Honeywell
Miller H Design Hi-Vis Vest Harness
Miller H-Design Hi-Vis vest and harness have been designed to use with the H-Design harness which ensures that you are visible from a distance. The vest is complete with DuraFlex 2 point harness and automatic loops. The harness has stretch webbing, 2 loops, auto buckles and the size 2 yellow high visibility vest.
HARNESS:
H Design DuraFlex
2 point harness
Stretch Webbing
Front and rear anchorage points
Quick buckles – Chest and leg straps size 2 – Aluminium breaking strength 900 daN
2 webbing loops
Shoulder straps – breaking strength 2200 daN
Other straps – standard webbing breaking strength 2700 daN
D ring – Steel finish, Zinc plated breaking strength 2300 daN
Sternal anchorage point
Long loops
Water repellent
Anti-stain
HI-VIS VEST
Hi-Vis
Side zippers
Double cursers
Inner zippers
Removable
Fits any body shape
Adjusts to all weather clothing
Easy to fix to the harness
2 Large slits allow height adjustment of sternal anchor point and chest straps
1 Back slit with hook and loop fastening to sustain D ring
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and ...
New Items
New items
1031453, Miller By Honeywell
PSS Restraint Titan Rope Lanyard 1 m MOB.PLATF
PSS PA 3 Titan restraint rope lanyard is 1 m long and comes equipped with 1 screwgate karabiner.
ROPE:
3 Strand polyamide rope
Breaking strength 2200 daN
CS20 CONNECTOR:
Steel
Opening 17 mm
Weight 0.165 kg
Dimensions 104 x 58 mm
SCAFF HOOK CONNECTOR:
Steel
Opening 50 mm
Weight 0.165 kg
Dimensions 218 x 115 mm
Temperature range -30°C to +50°C
Standards
EN 354
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders mu...
New items
1011897, Miller By Honeywell
Titan Restraint Kit
Restraint Kit with a 1 point Titan harness (dorsal D ring, with fast release buckles and adjustable leg straps), a 2m restraint lanyard and 2 karabiners. Suitable for roof maintenance. Easy to use, the kit contains all the essentials for Restraint.,1 point Titan Harness: blue with black line webbing, made from polyamide. Width: 45mm.,Dorsal D Ring: made from stainless steel.,Fast Release Buckles: made from galvanised steel. Weight: 0.500kg, breaking strength: >15daN.,2m Restraint Lanyard: made from 12mm polyamide rope.,Karabiners: made from stainless steel. Opening: 18mm, breaking strength: 2500daN.
Standards
Harness: EN 361, Lanyard: EN 354, Karabiners: EN 362.
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;...
New items
1032354, Miller By Honeywell
Miller Kernmantel Forked Restraint Lanyard
Miller kernmantel forked restraint lanyard complete with one aluminium twist lock karabiner and two GO60 aluminium scaffold hooks. The kernmantel is a new design and made with a light green rope with black stripes. The colours making the rope visible from a distance plus increasing the safety at work. The stitches in the rope are also highly visible which ensures a safety check before use. Restraint lanyards restrict a workers movement which prevents reaching areas where a fall hazard exists. The rope used in this kernmantel is two times more abrasion resistant than standard ropes.
FEATURES and BENEFITS:
Forked restraint lanyard
1 Aluminium twist lock karabiner
2 GO60 aluminium scaffold hooks
Light green rope with black stripes
Highly visible stitches
2 times more abrasion resistance
Restricts movement
1 m long
Weight 0.799 kg
Breaking strength 22 KN
TWIN LOCK KARABINER:
Connector – Aluminium
Connector opening – 18 mm
Connector breaking strength – 23 KN
GO60 SCAFF HOOKS:
Connector – Aluminium
Connector opening – 60 mm
Connector breaking strength – 23 KN
APPLICATIONS:
Building
Construction
Utilities
Standards
EN 632, EN 354, EN 358
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high fal...
New items
1031451, Miller By Honeywell
PSS Restraint Lanyard WK Position 2 m
PSS WK Position 2 m restraint lanyard is a 12 mm rope adjustable lanyard with 2 alloy karabiner with a 20 mm opening.
ROPE:
ROPE:
100% polyamide
12 mm diameter
Breaking strength 2200 daN
TWIST LOCK KARABINERS:
Alloy
Opening 20 mm
Dimensions – 123 x 70 mm
Breaking strength 2200 daN
Weight 0.45 kg
Standards
EN 358
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders must ensure:
Schedules
existing places of work and means o...
New items
1031440, Miller By Honeywell
PSS 2 Point Titan Harness
PSS 2 point Titan harness is a perfect for all as it is a one size harness. The 2 point harness is complete with a dorsal D-ring and frontal webbing loops including fast release buckles and adjustable leg straps.
FEATURES and BENEFITS:
One size fits all
Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Includes fast release buckles made from galvanised steel
Weight 0.5 kg
Temperature range -30°C to +50°C
Static test 15 KN
Standards
EN 361
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
...
New items
1031460, Miller By Honeywell
PSS Titan Web Anchorage Sling PAM080
PSS Titan web anchorage sling (PAM080) made from polyamide orange and black webbing. The sling is 25 mm wide and has a breaking strength of 22 KN.
FEATURES and BENEFITS:
Anchorage sling
PAM080
Polyamide webbing
Width 25 mm
Weight 0.08 kg
Breaking strength 22 KN
Standards
EN 795, EN 566
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
Duty holders must ensure:
Schedules
existing places of work and means of access for work at height
collective fall prevention (e.g. guard-rails, toe boards and w...
New items
1031447, Miller By Honeywell
PSS Falcon 10 m Cable Galva Self Retracting Lifeline
PSS Falcon 10 m cable self-retracting lifeline is one of the safest and robust retractable lifelines. ECO range is supplied with a karabiner at the top plus is equipped with a swivel snap hook. The snap hook has a fall indicator at the bottom of the cable and a steel spring.
FEATURES and BENEFITS:
10 M Galva
Galvanised wire rope
Housing of high impact nylon
Hub is heat treated aluminium
Braking mechanism is stainless steel and bronze
Dimensions: 255 x 213 x 101 mm
Weight 4.05 kg
Cable lifeline – 4.5 mm diameter galvanised
Cable supplied with a double ferrule
Zinc plated steel, double locking snap hook
Swivel snap hook with 22 mm opening
Standards
EN 360
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling...
New items
1031433, Miller By Honeywell
PSS Titan Scaffolding Kit
The Titan scaffolding kit is a complete kit which provides the protection needed when working on scaffolding. The kit consists of a 1 point Titan harness with a dorsal D-ring and Titan 2 m shock absorbing lanyard.
HARNESS
:
Blue with black line webbing
Polyester webbing 45 mm
Dorsal D-ring made from stainless steel
Fast release buckles made from galvanised steel
Static test 15 KN
Standard EN 361
SHOCK ABSORBING LANYARD 2 m:
Made from polyester
Width 30 mm
SHOCK ABSORBER / SCAFF HOOK:
SHOCK ABSORBER:
Made from polyamide
34 mm wide
SCAFF HOOK:
Made from steel
Opening off 63 mm
KARABINERS:
Made from galvanised steel
Opening of 18 mm
Breaking strength 15 KN
Standards EN 355
Standards
EN 361, EN 355
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropri...
New items
1031446, Miller By Honeywell
PSS Turbolite 2M Web Self Retracting Webbing Lifeline
PSS Turbo-lite 2 m self-retracting webbing lifeline is an alternative to shock absorbing lanyards used in fall factor 2. The life line is excellent for use in all situations when working with low space clearance plus can be used on both ways around.
FEATURES and BENEFITS:
Housing impact resistant nylon
Stainless steel breaking system
Vectram webbing – 25.4 x 1.5 mm
SRL length – 2 m
Steel twist lock karabiner opening 18 mm
Aluminium scaff hook opening 65 mm
Shock absorber when fully deployed –max length 60 cm
Maximum rated load 136 kg (use in up anchorage point)
100 kg (use in down level)
Temperature range -30°C to +50°C
Standards
EN 360
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly contro...
New items
1031452, Miller By Honeywell
PSS Web Shock Lanyard
PSS web shock ABS 2 m scaffolding lanyard. The lanyard is complete with a shock absorber, scaff hook and karabiner.
LANYARD:
Polyester
Width 30 mm
SHOCK ABSORBER:
Polyamide
Width 34 mm
SCAFF HOOK:
Steel
Opening 63 mm
KARABINER:
Galvanised steel
Opening 18 mm
Breaking strength 15 KN
Weight 0.95 kg
Standards
EN 355
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;
the risks from fragile surfaces, falling objects and dangerous areas are properly controlled;
equipment for work at height is properly inspected and maintained;
places of work at height are inspected and checked on each occasion before use
...
New items
1031456, Miller By Honeywell
PSS Web Mobile Lifeline
The Web mobile lifeline is a valuable piece of fall arrest equipment providing you with a 20 m horizontal adjustable lifeline. The lifeline is supplied in a bag complete with two slings.
WEBBING HORIZONTAL LIFELINE:
Adjustable from 5 m to 20 m
Breaking strength 20 KN
Maximum deflection 2 m
EN 795 class b
Weight 5.54 kg
Temperature range of minus 30°C to plus 50°C
Supplied in a bag
WEBBING:
Polyester 35 mm
Breaking strength 4500 daN
WEBBING ADJUSTER:
Biochromate steel adjuster
Breaking strength 1500 daN
TEXTILE SLING:
Orange and black webbing
Made from polyamide
Width 25 mm
EN 795 / EN 566
Standards
EN 795 class b, EN 795 / EN 566
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and organised;
all work at height takes account of weather conditions that could endanger health and safety;
those involved in work at height are trained and competent;
the risks from work at height are assessed (using the Risk Management Hierarchy) and appropriate work equipment is selected and used;...
New items
1032918, Miller By Honeywell
Miller H Design Hi-Vis Vest Harness
Miller H-Design Hi-Vis vest and harness have been designed to use with the H-Design harness which ensures that you are visible from a distance. The vest is complete with DuraFlex 2 point harness and automatic loops. The harness has stretch webbing, 2 loops, auto buckles and the size 2 yellow high visibility vest.
HARNESS:
H Design DuraFlex
2 point harness
Stretch Webbing
Front and rear anchorage points
Quick buckles – Chest and leg straps size 2 – Aluminium breaking strength 900 daN
2 webbing loops
Shoulder straps – breaking strength 2200 daN
Other straps – standard webbing breaking strength 2700 daN
D ring – Steel finish, Zinc plated breaking strength 2300 daN
Sternal anchorage point
Long loops
Water repellent
Anti-stain
HI-VIS VEST
Hi-Vis
Side zippers
Double cursers
Inner zippers
Removable
Fits any body shape
Adjusts to all weather clothing
Easy to fix to the harness
2 Large slits allow height adjustment of sternal anchor point and chest straps
1 Back slit with hook and loop fastening to sustain D ring
The Work at Height Regulations 2005
The Work at Height Regulations 2005, which came into affect in April 2005, apply to all work at height where there is a risk of a fall liable to cause personal injury. The creation of this one, comprehensive set of legal requirements for any work at height is intended to further serve the underlying principle that regulations should provide goal-setting objectives for management rather than prescriptive codes of practice, which can create unnecessary problems. They effectively remove the old 'two-metre rule' division between low and high falls of which there are more reported cases of major injuries resulting from 'low' falls than 'high'.
Essential Requirements
all work at height, including emergencies and rescue is properly planned and ...
Don’t hesitate to ask questions for better clarification.