Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 15

Showing Results For: Multimeter Fuses

Multimeter Fuses

Multimeter fuses, often called current-limiting or protection fuses, are essential components in digital and analogue multimeters. They are integral to protecting the multimeter and the user during electrical measurements. These fuses limit the flow of current to prevent damage to the instrument and mitigate potential hazards. 

Users should know the fuse types, ratings, and compatibility with their multimeters, regularly test and replace fuses as needed, and prioritise safety when working with electrical circuits. Proper handling and maintenance of multimeter fuses contribute to the overall reliability and safety of electrical testing and measurement processes.

Importance of Multimeter Fuses

Multimeter fuses are indispensable safety devices that protect the multimeter and the user. They limit the current flow through the instrument, preventing overload conditions that could damage sensitive internal components or lead to dangerous situations, including short circuits and electrical fires.

Different Types of Multimeter Fuses

There are several types of fuses utilised in multimeters, including:

  • Fast-Acting Fuses: These fuses are designed to blow quickly when subjected to overcurrent conditions, providing rapid protection for the multimeter's internal circuitry.
  • Slow-Blow Fuses: Time-delay fuses offer a higher tolerance for brief current surges and are less likely to blow from transient spikes.
  • Resettable Fuses (PTCs): Unlike traditional fuses, resettable polymeric positive temperature coefficient (PTC) fuses can recover after an overcurrent condition by automatically returning to their low-resistance state once the fault is removed.

Fuse Ratings and Compatibility

Multimeter fuses have various ratings, including current (amperage) and voltage. Selecting a replacement fuse with the correct ratings is crucial to ensure proper protection and multimeter functionality. Using an incorrectly rated fuse can compromise safety and accuracy.

Testing and Replacing Multimeter Fuses

  • Regularly testing and, if necessary, replacing multimeter fuses is crucial to maintain the instrument's accuracy and safety.
  • Testing can be done using a multimeter's continuity or resistance measurement function.
  • When replacing a fuse, ensure it has the correct ratings and is compatible with the multimeter's design.
  • Factors to Consider Before Buying Multimeter Fuses

FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
BST-FUSE, SAM
80 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 26.21
Martindale
MTL1015, Martindale
144 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.43
DX02007, Catu
10 In Stock
Check Stock & Lead Times Packaging Options
2 +
£ 28.05
FUSE-440MA/1000V B1, Fluke
3344 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 5.25
FUSE-11A/1000V B1, Fluke
1895 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 9.39
Martindale
RSMTL1015, Martindale
145 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 7.43
DX2007, Catu
92 In Stock
Check Stock & Lead Times Packaging Options
2 +
£ 30.98
Metrix
Rohs Verified
AT0095, Metrix
10 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 28.06
Fluke
686527, Fluke
29 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 11.25
Gossen Metrawatt
Rohs Verified
Z109L, Gossen Metrawatt
98 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 86.39
ISO-TECH
Rohs Verified
RS_388-4132, ISO-TECH
97 In Stock
Check Stock & Lead Times Packaging Options
3 +
£ 2.11
Gossen Metrawatt
Z109B, Gossen Metrawatt
58 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 7.28
Littelfuse
Rohs Verified
0BLS003.T, Littelfuse
3 In Stock
Check Stock & Lead Times Packaging Options
5 +
£ 14.06
60 +
£ 13.67
125 +
£ 13.30
ISO-TECH
RS_450-0071, ISO-TECH
69 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 6.48
Gossen Metrawatt
Z109C, Gossen Metrawatt
98 In Stock
Check Stock & Lead Times Packaging Options
10 +
£ 5.34
Showing
1 -

New Items
New items
Z109L, Gossen Metrawatt

Z109L, Gossen Metrawatt

Accessories for METRA HIT multimeter Type Description Stock no. NA X-TRA Mains adapter 90 → 250 VAC / 5 V for METRA HIT X-TRA 606-3619 GH18 Rubber holster and carrying straps for METRA HIT 22S to 30M, 16I / T / U, 27M / I, 28C / C light 292-1375 GH X-TRA Rubber holster and carrying straps for METRA HIT BASE / PRO / X-TRA 611-6331 F836 Carry case for 1 device and measuring cable set 292-1353 F840 Carry case for 2 devices, 2 adapters, accessories 334-7194 KS17-2 Standard measuring cable set for METRA HIT 292-1296 KS29 Safety measuring cable set (for 29S only) 292-1303 FF 1.6 A / 1 kV Fuse for 23S → 26S; 27M / I; 28S; 29S (Pack of 10) 384-257 FF 10 A / 1 kV Fuse for X-TRA; PRO; 28S; 29S (Pack of 10) 606-3782 FF 16 A / 1 kV Fuse for 24S → 26S (Pack of 10) 384-241
New items
DX02007, Catu

DX02007, Catu

Shocksafe fuse with indicator light for Pointest probes The use of this HBC fuse technology is essential when taking measurements on high power installations. In the event of a short-circuit, it will protect you and the indicator light will illuminate to show that the fuse has blown. This fuse is fitted to Pointest type probes and is compatible with standard 4 mm plugs.
New items
Z109C, Gossen Metrawatt

Z109C, Gossen Metrawatt

Accessories for METRA HIT multimeter Type Description Stock no. NA X-TRA Mains adapter 90 → 250 VAC / 5 V for METRA HIT X-TRA 606-3619 GH18 Rubber holster and carrying straps for METRA HIT 22S to 30M, 16I / T / U, 27M / I, 28C / C light 292-1375 GH X-TRA Rubber holster and carrying straps for METRA HIT BASE / PRO / X-TRA 611-6331 F836 Carry case for 1 device and measuring cable set 292-1353 F840 Carry case for 2 devices, 2 adapters, accessories 334-7194 KS17-2 Standard measuring cable set for METRA HIT 292-1296 KS29 Safety measuring cable set (for 29S only) 292-1303 FF 1.6 A / 1 kV Fuse for 23S → 26S; 27M / I; 28S; 29S (Pack of 10) 384-257 FF 10 A / 1 kV Fuse for X-TRA; PRO; 28S; 29S (Pack of 10) 606-3782 FF 16 A / 1 kV Fuse for 24S → 26S (Pack of 10) 384-241
New items
0BLS003.T, Littelfuse

0BLS003.T, Littelfuse

Fuses for Fluke Multimeters Littelfuse HBC ceramic fuses benefit from a high interupting capacity. These fuses are suited to control circuits and recommended for Fluke Multimeters. Other applications could be lighting computers and other applications without high in-rush currents. Compatibility 1A Fluke (Series II) 75, 77, 21, 23 3A 25, 25, 8060A, 8062A 15A Fluke (Series ii) 73, 75, 77, 79, 21, 23, 29, 83, 85, 87 20A Fluke 25, 27 Approvals UL; CSA
New items
686527, Fluke

686527, Fluke

Fluke 715 Current Loop Calibrator, 4 → 20 mA Measures loop current (0 → 20 mA, 4 → 20 mA) with 0.02% accuracy and 1 μA resolution Measures unit voltages 0 → 10 V from transmitters, regulators or SPS Provides or simulates → 24 mA loop current Provides voltage → 100 mV or 10 V 24-volt provision with simultaneous current loop readings Optional accessories Carry case C25 (RS stock no.: 106-6001 )
New items
DX2007, Catu

DX2007, Catu

Shocksafe fuse with indicator light for Pointest probes The use of this HBC fuse technology is essential when taking measurements on high power installations. In the event of a short-circuit, it will protect you and the indicator light will illuminate to show that the fuse has blown. This fuse is fitted to Pointest type probes and is compatible with standard 4 mm plugs. Operating voltage: 500 V Breaking capacity: 100 kA Rating: 1 A Length: 80 mm
New items
RS_388-4132, ISO-TECH

RS_388-4132, ISO-TECH

Spare Fuses for Test Leads Replacement fuses for RS Pro GS38 fused test leads and fused accessories. High Breaking Capacity rated at 500 mA with 50 kA rupture current. Standards 8888 Test Lead Fuses
New items
Z109B, Gossen Metrawatt

Z109B, Gossen Metrawatt

Accessories for METRA HIT multimeter Type Description Stock no. NA X-TRA Mains adapter 90 → 250 VAC / 5 V for METRA HIT X-TRA 606-3619 GH18 Rubber holster and carrying straps for METRA HIT 22S to 30M, 16I / T / U, 27M / I, 28C / C light 292-1375 GH X-TRA Rubber holster and carrying straps for METRA HIT BASE / PRO / X-TRA 611-6331 F836 Carry case for 1 device and measuring cable set 292-1353 F840 Carry case for 2 devices, 2 adapters, accessories 334-7194 KS17-2 Standard measuring cable set for METRA HIT 292-1296 KS29 Safety measuring cable set (for 29S only) 292-1303 FF 1.6 A / 1 kV Fuse for 23S → 26S; 27M / I; 28S; 29S (Pack of 10) 384-257 FF 10 A / 1 kV Fuse for X-TRA; PRO; 28S; 29S (Pack of 10) 606-3782 FF 16 A / 1 kV Fuse for 24S → 26S (Pack of 10) 384-241
New items
AT0095, Metrix

AT0095, Metrix

Fuses for multimeters Replacement cartridge fuses for multimeters, 7 x 32 mm, 10 A, 600 V.
New items
RS_450-0071, ISO-TECH

RS_450-0071, ISO-TECH

ISO-TECH Fuses Fuses recommended for the ISO-TECH Multimeter range. Warning Account should be taken of the protection features and safety ratings of the test meter itself when combined with high specification test leads.
New items
FUSE-440MA/1000V B1, Fluke

FUSE-440MA/1000V B1, Fluke

Fluke Series III/IV Multimeter Fuses Quick acting High Breaking Capacity fuses suitable for use with Fluke 20, 70 & 80 Series III digital multimeters. Also suitable for 860 Series graphical multimeters and older IEC1010 rated Fluke 80 series multimeters. 440 mA 10.3 x 35 mm 1000 V a.c./d.c. 10 kA breaking capacity suitable for Fluke 75, 77, 79, 23, 26, 83, 85 & 87 (Series III) digital multimeters. Also suitable for 863 & 867 graphical multimeters. 11 A 10.3 x 38 mm 1000 V a.c./d.c. 17 kA breaking capacity suitable for Fluke 70, 73, 75, 77, 79,21,23, 26, 83, 85 & 87 (Series III) digital multimeters.
New items
FUSE-11A/1000V B1, Fluke

FUSE-11A/1000V B1, Fluke

Fluke Series III/IV Multimeter Fuses Quick acting High Breaking Capacity fuses suitable for use with Fluke 20, 70 & 80 Series III digital multimeters. Also suitable for 860 Series graphical multimeters and older IEC1010 rated Fluke 80 series multimeters. 440 mA 10.3 x 35 mm 1000 V a.c./d.c. 10 kA breaking capacity suitable for Fluke 75, 77, 79, 23, 26, 83, 85 & 87 (Series III) digital multimeters. Also suitable for 863 & 867 graphical multimeters. 11 A 10.3 x 38 mm 1000 V a.c./d.c. 17 kA breaking capacity suitable for Fluke 70, 73, 75, 77, 79,21,23, 26, 83, 85 & 87 (Series III) digital multimeters.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Multimeter Fuses and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Multimeter Fuses or any other product.
This depends on the Multimeter Fuses individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Multimeter Fuses and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Multimeter Fuses.
Yes. We keep updating our stock frequently and if a product like Multimeter Fuses is not in stock then we will let you know.