What are the shipping charges for products like Oscilloscope Modules?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

Where are your products like Oscilloscope Modules manufactured?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Oscilloscope Modules?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

How long will it take to receive the order that I placed for Oscilloscope Modules?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

Are your products Oscilloscope Modules in stock?

Yes. We keep updating our stock frequently and if a product like Oscilloscope Modules is not in stock then we will let you know.

Oscilloscope Modules | USB Modules

New items

RTH-K201, Rohde & Schwarz

RTH-K200 Wireless LAN Module Software and RTH-K201 Remote Control Wireless LAN module, full remote control functionality requires additional software option RTH-K201 (see RS Stock No. 125-9478 ) Features Interface wireless LAN 802.11 b/g/n 2x2, 2.4 GHz Operating modes: access point and client mode Certifications: CE0682 Rohde & Schwarz Scope Rider Handheld Digital Oscilloscope System

Product Detail

New items

DSOXLAN, Keysight Technologies

Keysight InfiniiVision Series Accessories A full range of Keysight accessories is available for Keysight InfiniiVision 2000X and 3000X Series oscilloscopes. These range from upgrade and application modules to a carry case ( 725-0555 ) and rackmount kit ( 725-0558 ). A built-in storage compartment beneath the scope handle provides secure, protected storage for physical accessories - so they are ready for use at any time. Keysight InfiniiVision Series Keysight InfiniiVision 2000 & 3000 X-Series offers the power of 4 instruments in 1: oscilloscope; logic analyzer; function generator; protocol analyzer. The models are fully upgradable (bandwidth, MSO, WaveGen, memory, measurement applications) to meet future requirements and protect investment.

Product Detail

New items

RTH-B1, Rohde & Schwarz

Mixed Signal Logic Analyser Option Mixed signal upgrade option for non-MSO (Mixed Signal Option) models, 250 MHz. The R&S RTO-B1 MSO option turns the R&S RTO oscilloscopes into fast, precise and easy-to-use mixed signal oscilloscopes (MSO). Suitable for use with the following ScopeRider digital oscilloscopes: RTH1002 and RTH1004 (RS Stock No's. 125-9462 125-9463 respectively). Benefits MSO option enhances analysis capabilities of the R&S®RTO oscilloscopes More signal details thanks to high time resolution across the entire memory depth Reliable triggering on signal events Specifications Digital channels: 16 channels (2 logic probes) Input impedance: 100 kΩ ± 2 % || ∼4 pF (meas.) at probe tips Rohde & Schwarz Scope Rider Handheld Digital Oscilloscope System

Product Detail

New items

RTB-K1, Rohde & Schwarz

Rohde & Schwarz RTB2000 Digital Oscilloscopes The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, for troubleshooting embedded designs during development and for production and service departments. This series of oscilloscopes offer the largest (10.1 inch) capacitive touch display with the highest resolution of 1280 ´ 800 pixel in its class. The touch screen allows quick navigation in pop-up menus, easily adjust scaling, zoom in or to move a waveform and even annotate the display and take screenshots. It works just like your smartphone touch screen. The R&S®RTB2000 series give users more than just an oscilloscope. It also includes a logic analyser, protocol analyser, waveform and pattern generator and digital voltmeter. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient. Features 10 bit vertical resolution 1 mV/div: full measurement bandwidth and low noise 10Msample standard and 20 Msample interleaved Segmented memory: 160 Msample with history 10.1 inch high resolution capacitive touch screen with gesture support On-screen annotation function by using your finger with screen-shot capture Fast access to important tools Education mode disables automatic functions for more manual control Multilingual support Mixed signal operation option (model dependant, also any oscilloacope can be upgraded to MSO with the RTB-B1 MSO option (RS 143-9334) Oscilloscope Choice: 143-9311 RTB2002, 70 MHz, 2ch 143-9312 RTB2002, 70MHz, 2ch, MSO 143-9313 RTB2004, 70 MHz, 4ch 143-9315 RTB2004,...

Product Detail

New items

ADA400A, Tektronix

Tektronix ADA400A 1 MHz Differential Preamplifier The ADA400A Active Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.,The high gain and extremely high common mode rejection provide usable measurements of voltages as low as 5μV, even in high noise environments. Selectable bandwidth limiting reduces normal mode noise from digital logic, switch mode power supplies and line frequency sources. Adjustable differential offset allows the user to null out transducer bridge bias and galvanic potential from the test set-up. An "infinite impedance" mode can be selected in the two highest gain ranges allowing accurate measurements of signals with high source impedance. It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE® interface 10μV/div Sensitivity Low-pass filter: 100Hz, 3kHz, 100Hz or Full (1 MHz) Typically 100 dB CMRR DC to 10 kHz Selectable Gain: 100, 10, 1 or 0.1 Accurately measures signal as small as 5uV Integral Probe Power with TEKPROBE™BNC Gain CM Range Differential Range*1 MAX Offset 100 ±10 V 0.1 V ±1.0 V 10 ±10 V 1 V ±1.0 V 1 ±40 V 10 V ±40 V 0.1 ±40 V 80 V ±40 V Compatible Oscilloscopes TDS400/500/600/700/3000/3000/5000

Product Detail

New items

RTH-K1, Rohde & Schwarz

Serial Triggering and Decoding Options Protocols such as I2 C or SPI are frequently used for transferring control messages between integrated circuits. The R&S®ScopeRider is the first isolated handheld digital oscilloscope with trigger and decode capability for in-depth troubleshooting. Triggering on protocol events or data enables selective acquisition of relevant events, data and signals. Two serial triggering and decoding options are available for the ScopeRider RTH1002 ( 125-9462 ) and RTH1004 ( 125-9463 ) handheld digital oscilloscopes. I2C/SPI RTH-K1 Serial Triggering and Decoding - RS Stock No. 125-9473 UART/RS-232/RS-422/RS-485 RTH-K2 Serial Triggering and Decoding - RS Stock No. 125-9474 Rohde & Schwarz Scope Rider Handheld Digital Oscilloscope System

Product Detail

New items

DSOXGPIB, Keysight Technologies

Keysight InfiniiVision Series Accessories A full range of Keysight accessories is available for Keysight InfiniiVision 2000X and 3000X Series oscilloscopes. These range from upgrade and application modules to a carry case ( 725-0555 ) and rackmount kit ( 725-0558 ). A built-in storage compartment beneath the scope handle provides secure, protected storage for physical accessories - so they are ready for use at any time. Keysight InfiniiVision Series Keysight InfiniiVision 2000 & 3000 X-Series offers the power of 4 instruments in 1: oscilloscope; logic analyzer; function generator; protocol analyzer. The models are fully upgradable (bandwidth, MSO, WaveGen, memory, measurement applications) to meet future requirements and protect investment.

Product Detail

New items

RTH-B221, Rohde & Schwarz

Rohde & Schwarz RTH1002 Scope Rider Handheld Digital Oscilloscope 60 MHz 2 Channels DMM Rohde & Schwarz Scope Rider RTH1002 offers the performance and capabilities of a laboratory oscilloscope together with the form factor and ruggedness of a battery-operated handheld device. Digital control signals can be analysed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capabity is unprecedented in handheld oscilloscopes and provides direct display of decoded messages. If extra safety is required, the RTH1002 can be remotely controlled with the Web browser via wireless LAN, separating the measurement location from the place where the user controls the instrument. Features and Benefits 60 MHz with 5 Gsample/s sampling rate 2 isolated channels with CAT IV 600 V / CAT III 1000 V rating 10-bit ADC 50000 waveforms per second Capacitive touch and keypad operation 5 integrated modes: lab performance oscilloscope; logic analyser; protocol analyser; data logger; digital multimeter (integral) IP51 housing meeting military environmental requirements Wireless LAN and Ethernet for web-based remote control and quick data access Battery operates for more than 4 hours on one charge Areas of Application Safe debugging of embedded power supplies Fast debugging using specialised triggers Wireless control can be used for increased operator safety Quick and efficient troubleshooting Bandwidth Upgrades To preserve your oscilloscope investment as your requirements change, four bandwidth upgrades are avalable: 100MHz 200Mhz 350Mhz and 500Mhz (RS Stock No's. 125-9465 , 125-9466 , 125-9467 , 125-9468 respectively). Supplied with 500 MHz, 10:1, 600 V CAT IV voltage probe (1 per channel), 600 V CAT IV test lead (1 per meter input), user manual, lithium-ion battery pack, power sup...

Product Detail

New items

RTB-K3, Rohde & Schwarz

Rohde & Schwarz RTB2000 Digital Oscilloscopes The Rhode & Schwarz RTB2000 series digital oscilloscopes offer the Power of ten: 10-bit ADC, 10 Msample memory and 10.1 inch colour touchscreen. These features ombined with smart operating concepts make the R&S®RTB2000 series the perfect tools for university laboratories, for troubleshooting embedded designs during development and for production and service departments. This series of oscilloscopes offer the largest (10.1 inch) capacitive touch display with the highest resolution of 1280 ´ 800 pixel in its class. The touch screen allows quick navigation in pop-up menus, easily adjust scaling, zoom in or to move a waveform and even annotate the display and take screenshots. It works just like your smartphone touch screen. The R&S®RTB2000 series give users more than just an oscilloscope. It also includes a logic analyser, protocol analyser, waveform and pattern generator and digital voltmeter. Dedicated operating modes for frequency analysis, mask tests and long data acquisitions are also integrated. Debugging all kinds of electronic systems is easy and efficient. Features 10 bit vertical resolution 1 mV/div: full measurement bandwidth and low noise 10Msample standard and 20 Msample interleaved Segmented memory: 160 Msample with history 10.1 inch high resolution capacitive touch screen with gesture support On-screen annotation function by using your finger with screen-shot capture Fast access to important tools Education mode disables automatic functions for more manual control Multilingual support Mixed signal operation option (model dependant, also any oscilloacope can be upgraded to MSO with the RTB-B1 MSO option (RS 143-9334) Oscilloscope Choice: 143-9311 RTB2002, 70 MHz, 2ch 143-9312 RTB2002, 70MHz, 2ch, MSO 143-9313 RTB2004, 70 MHz, 4ch 143-9315 RTB2004,...

Product Detail