Portable Hydraulic Cylinders - Lifting Type

Low Height Pad Cylinders-High Pressure Combine minimum collapsed height with optimum stroke They provide a short adjusting and lifting force in confined work areas Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension Dimensions Stock no. A (mm) B (mm) C (mm) H (mm) J (mm) K (mm) M (mm) Wt. (kg) 808-056 32 60 24 38 26 5.6 20 0.6 808-062 42 60 24 38 26 5.6 20 0.8 808-078 45 81 38 56 37 7 34 1.5 808-084 52 100 51 76 50 9 40 2.7 808-107 67 140 70 114 67 11 54 6.5 Low Height Cylinders High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1 Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar For suitable oil see technical specification of Hydraulic Hand Pumps Maintenance seal kits are available separately Warning Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.

Single Acting Cylinder & Air Pump Set Enerpac’s SCR-256XA pump and cylinder kit pairs a general purpose cylinder with the XA-11 air driven foot pump to provide a hydraulic lifting set that is ready to use straight out of the box. Enerpac have matched components together providing you with a high quality and reliable setup designed to provide trouble free operation in variety of lifting and push applications. RC Series Single Acting Cylinder Features & Benefits The RC series of hydraulic cylinder are fitted with heavy duty return springs and plunge wipers to extend cylinder reliability and life. They are manufactured from a strong alloy steel and have a baked enamel finish for longevity and corrosion resistance. All versions are fitted with a CR-400 hydraulic coupler for quick and easy connection and use Enerpac’s unique golden ring system to prevent damage and seizure caused by off centre loading. XA-11 Foot Operated Air Pump Features & Benefits The two-pedal design (one pedal for pressure control, the other pedal for tool retract) enables operators to use the pump with the ball of their foot, and keep their heel on the floor. With two pedals, the operator's weight rests on two legs, and is not shifted to one side, which is the case when using some pedal designs (or simgle pedal models). The ergonomic design Enerpac Hydraulic Foot Pump reduces operator fatigue, and provides greater stability. The XA-Series pump can operate up to twice as fast as conventional pumps, and releasing the hydraulic pressure using the release pedal accurately controls the rate at which the hydraulic fluid flows; greater pedal depression, greater flow and vice-versa. Each kit contains XA series XA-11 air pump RC-256 Single acting, general purpose cylinder HC-7206 1.8m hydraulic hose GF-20B hydraulic gauge Cylinder & Pump Sets

Power Box Cylinder & Pumpsets Enerpac power box sets give you a complete hydraulic solution in one package. Each pack contains a hydraulic cylinder, P-392 hand pump, 700 bar pressure gauge with adapter assembly and a 1.8m hydraulic hose all supplied in a tough plastic carry case to make transportation easy. The two speed hand pump requires 78% less effort operate than single speed versions and is fitted with a pressure relief valve to prevent overloading. Lightweight and low handle effort ensures ease of use a minimum operator fatigue. The Powerbox kit is available with a choice of cylinders including a wedge spread, general purpose, low height or flat-jac cylinder ensuring there is a Powerbox kit for a wide range of lifting, pulling, pushing and bending applications. All cylinder comly to ASME B30.1 and feature a baked enamel finish for improved corrosion resistance. Cylinder & Pump Sets