Rates
1+
£ 318.06
Products Found: 17
Showing Results For: Linear Actuator Switches
Linear Actuator Switches
FILTERS
Filters
Showing
1 -
New Items
New items
D-F7PL, SMC
Magnetic sensors
Magnetic sensors for cylinders series (E) CQ2B.
Reed contact version with embedded wires or 3 PNP wires.
Direct attachment on the cylinder.
LED status display.
Stock no.
724-807
236-6548
Switching:
Reed contact
PNP
Voltage:
24Vac → 110Vac
4.5 → 28Vdc
Max. current:
40mA → 24V
100mA
Protection index: IP 67
Operating temperature: –10°C → +60°C
Wire length: 3m
New items
D-A93L, SMC
Sensing Switches
Reed and Solid State sensing switches from SMC.
Note
No fixing screw and plate included for the switch.
New items
6DR4004-6J, Siemens
SIPART PS2 Accessories for Position Controller Accessories for SIPART PS2 position controllerAlarm module for 3 alarm outputs and 1 binary input, not explosion proof513-727Alarm module for 3 alarm outputs and 1 binary input, explosion proof513-688SIA module (slotted initiator alarm module), not explosion proof513-672SIA module (slotted initiator alarm module), explosion proof513-698Limit value contact module with mechanical switching contacts, not explosion proof513-632Limit value contact module with mechanical switching contacts, explosion proof513-648IY-module for position feedback signal (4 20 mA), not explosion proof513-644IY-module for position feedback signal (4 20 mA), explosion proof513-638Mounting set for NAMUR rotary actuator with mounting console513-654Mounting set for NAMUR linear actuator with lever arm for 2 35 mm513-650Mounting set for NAMUR linear actuator with lever arm for 35 130 mm513-660
New items
D-H7BAL, SMC
CDJ5D Reed Switch
For use with CDJ5D double-acting cylinders
Complete with 3m flying lead
Mounting bands supplied separately
IP67 Rating
Temperature range: -10 to 60°C
Technical Specification
Type
Load Voltage
Load Current
Voltage Drop
Manu. Part No.
Stock no.
Switch
24Vdc (10 to 28Vdc)
5 to 40mA
≤4V
D-H7BAL
477-851
New items
D-97L, SMC
Sensors
A series of reed switches from SMC. These direct mounting style auto switches are suitable for use with air cylinders and are available with or without indicator light.
New items
KL3388, Parker Origa
Reed Switch, Normally Closed - OSP-E25/32
Normally closed reed switch
5m long fly lead
Linear Actuators
New items
D-A90L, SMC
Reed Auto Switch
Direct mounting auto reed switches from SMC. This reed switch is magnetic field resistant and heat resistant. Designed for use with air cylinders, this model does not have the indicator light. These switches have a rugged design and a 1Ω or less internal resistance.
IP 67 Rating
0°C to 60°C Temperature Rating
New items
D-A73L, SMC
Sensors
Available as reed or solid state
Function N/O
IP67 rated
Supplied with 0.5m of cable
Reed type
Voltage
110Vac, 24V dc
Load current
5-10mA a.c. (2VA); 5-40mA d.c
Ambient temperature range
-10°C → +80°C
Protection rating
IP67
Solid state
Electrical
Grommet (3 wire)
Application
IC circuit, relay programmable controller
Power source
5/12/24V d.c. (4.5 - 28V d.c.)
Operating voltage
28V d.c. max.
Operating current
150mA d.c. max.
Current consumption
OFF : 1mA or less, ON : 12mA or less
Internal voltage drop
0.4V or less at 50mA operating current , 0.8V or less
150mA operating current
Response time
1ms or less
Temperature range
-10°C → +60°C
Note
No fixing screw and plate included for the switch.
New items
D-A73C, SMC
Sensors
Available as reed or solid state
Function N/O
IP67 rated
Supplied with 0.5m of cable
Reed type
Voltage
110Vac, 24V dc
Load current
5-10mA a.c. (2VA); 5-40mA d.c
Ambient temperature range
-10°C → +80°C
Protection rating
IP67
Solid state
Electrical
Grommet (3 wire)
Application
IC circuit, relay programmable controller
Power source
5/12/24V d.c. (4.5 - 28V d.c.)
Operating voltage
28V d.c. max.
Operating current
150mA d.c. max.
Current consumption
OFF : 1mA or less, ON : 12mA or less
Internal voltage drop
0.4V or less at 50mA operating current , 0.8V or less
150mA operating current
Response time
1ms or less
Temperature range
-10°C → +60°C
Note
No fixing screw and plate included for the switch.
New items
D-Y7PSAPC, SMC
Reed detector D-Y7P
Electronic detector with M8 connector.
Compatible with MHZ2, MHL2, MHS3 and MHC2 series clamps.
0.5 metre cable length.
Standards
IEC947-5-2
New items
D-A80CL, SMC
Sensors
Available as reed or solid state
Function N/O
IP67 rated
Supplied with 0.5m of cable
Reed type
Voltage
110Vac, 24V dc
Load current
5-10mA a.c. (2VA); 5-40mA d.c
Ambient temperature range
-10°C → +80°C
Protection rating
IP67
Solid state
Electrical
Grommet (3 wire)
Application
IC circuit, relay programmable controller
Power source
5/12/24V d.c. (4.5 - 28V d.c.)
Operating voltage
28V d.c. max.
Operating current
150mA d.c. max.
Current consumption
OFF : 1mA or less, ON : 12mA or less
Internal voltage drop
0.4V or less at 50mA operating current , 0.8V or less
150mA operating current
Response time
1ms or less
Temperature range
-10°C → +60°C
Note
No fixing screw and plate included for the switch.
New items
D-Y59AL, SMC
Magnetic Position Sensors
A range of sensors enabling position detection of the MGQ-M actuators.
LED indication option
Techincal specification - Solid state sensors
stock no.
Type
Load voltage
Load current
Power source
Internal
voltage drop
182-5888
3-wire solid state NPN
28Vdc max
40mA max
4.5 - 28Vdc
1.5V max.
182-5894
3-wire solid state PNP
28Vdc max
80mA max
4.5 - 28Vdc
0.8V max.
182-5917
2-wire solid state
28Vdc max
5-40mA
n/a
4V max.
Technical specification - Reed switch sensor
Application
Relay, PLC
Power supply
24Vdc (100Vac)
Load current
5 - 40mA (5 - 20mA)
Internal voltage drop
Ambient temperature
-10°C → +60°C
Protection rating
IEC IP67
Note
Magnetic position sensors may be used in conjunction with pneumatic grippers, typically
366-3597
and
350-0581
, available in some markets.
MGQ-M Compact Guided 12-50mm Diameter
Compact, double-acting guided cylinders utilising slide bearings. These cylinders maintain a very high non-rotational accuracy and have a high tolerance to side loading. All cylinders have magnetic sensing capabilities and direct mount facilities.