What are the shipping charges for products like Eurocards?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

How do I contact the Customer Support Team?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

Where are your products like Eurocards manufactured?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

Do you offer any discounts on bulk orders of products like Eurocards?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

How long will it take to receive the order that I placed for Eurocards?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

Are your products Eurocards in stock?

Yes. We keep updating our stock frequently and if a product like Eurocards is not in stock then we will let you know.

Eurocards | Plastic PCB Eurocards | PCB Covers | Double Side Plastic Cards

New items

61000007, nVent – Schroff

Eurocard Covers Plastic circuit board covers Mechanical protection for soldered side Available for 100 x 160 mm Eurocards Conductive Inside with insulating coating Conductive outer coating Surface resistance ≤ 1 Ω

Product Detail

New items

AL436, CIF

Test Boards for SMD Components Circuit boards for SMD components; CU on both sides. Area of pads 1mm square 1.27mm pitch 0.35mm through holes

Product Detail

New items

RE225-LF, Roth Elektronik

D-Sub Connector Labcard SRBP solder lacquered Epoxy fibre-glass FR4 1.5mm, hot air levelling (HAL-leadfree) 2 potential strips Stk nos. 528-0419 & 359-4019 2x9-channel and 2x15-channel Stk nos. 528-0425 & 359-4047 2x25-channel Connector type D-Sub DIN 41652 Single sided Board size 100 x 160 x 1.5mm Copper thickness 35μm hole pitch 2.54mm (0.1 in) Hole dia 1.0mm DIN Type Matrixboard Matrix boards with 1mm holes on a 2.54mm pitch.

Product Detail

New items

RE438-LF, Roth Elektronik

SMD Prototype board, RE438-LF 1.5 mm FR4 epoxy laboratory card Through hole plated Hot dip tin-plated (HAL lead-free) 32 / 64 / 96-pin plug connector, DIN 41612 design C Size: 100 x 160 mm Copper lamination: 35 μm / both sides Soldering islands: 113 x 76 / ø 1 mm Hole pattern: 1.27 x 1.27 mm (1 / 40\") Hole diameter: 1 mm DIN Type Matrixboard Matrix boards with 1mm holes on a 2.54mm pitch.

Product Detail

New items

ECS1, Velleman Components

The Eurocard 1-Hole Island is designed for electronic tools and Eurocard. This single-sided board with epoxy FR-4 material and flux coated bare copper is compatible with eurodin connectors DIN41617 and DIN41612, making it a versatile option for various applications. 1-hole island design for easy installation Track dimensions of 1.0mm for precise connections Single-sided board made of high-quality FR-4 material Compatible with eurodin connectors DIN41617 and DIN41612 for flexibility in use Packaged in a blister for convenient storage and transport

Product Detail

New items

10-1042, Vero Technologies

Development Boards DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered. Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Product Detail

New items

10-0581, Vero Technologies

High Density DIP board, Single Sided Ideal for high density circuitry using wirewrapping, hardwiring or Verowire interconnection rechniques. Prototyping DIP board, high density 3U Eurocard format PCB from copper clad SRBP material UL94 V0 rated Two Vcc and one 0V power rail options DIN 41494 cardframe compatible DIN 41612 connector pattern, up to 64/96 ways Microbus backplane compatible DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered. Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring...

Product Detail

New items

RE319-HP, Roth Elektronik

Matrixboards, DIN 41612//7 Type Plated through holes (double sided 321//322 types) Nominal thickness 1.5mm Copper thickness 35μm Hole Pitch 2.54mm (0.1 in) Hole dia 1.0mm Stock No. Sheet Size Hole grid Type Pad Type Connector Type Man. Part No. 206-5504 100x160 mm 37x56 Single-Sided Round DIN 41612 (C-96/abc) RE060-HP 518-5960 100x160 mm 37x55 Single-Sided Round DIN 41612 (C-96/abc) RE060-LF 206-5582 100x160 mm 37x58 Single-Sided Round DIN 41617 (31 Plug) RE220-HF 527-9346 100x160 mm 37x58 Single-Sided Round DIN 41617 (31 Plug) RE220-LF 206-5633 100x160 mm 37x55 Single-Sided Square DIN 41612 (D-32/ac) RE317-HF 527-9330 100x160 mm 37x55 Single-Sided Square DIN 41612 (D-32/ac) RE317-LF 206-5655 100x160 mm 37x55 Single-Sided Square DIN 41617 (C-64/ac) RE319-HF 518-6604 100x160 mm 37x55 Single-Sided Square DIN 41617 (C-64/ac) RE319-LF 206-5683 100x160 mm 37x53 Single-Sided Round DIN 41612 (C-96/abc) RE320-HF 527-9324 100x160 mm 37x53 Single-Sided Round DIN 41612 (C-96/abc) RE320-LF 518-6626 100x160 mm 36x55 Double-Sided Square DIN 41612 (C-96/abc) RE321-LF 527-9318 160x233.4 mm 55x88 Double-Sided Square DIN 41612 (C-96/abc) RE322-LF 206-5728 100x160 mm 32x55 Single-Sided Square DIN 41612 (D/E/F-32/48) RE323-HF 518-6632 100x160 mm 32x55 Single-Sided Square DIN 41612 (D/E/F-32/48) RE323-LF 206-5970 100x160 mm 37x57 Single-Sided Round DIN 41612 (D32/R5, 08) RE525-HF 528-0368 100x160 mm 37x57 Single-Sided Round DIN 41612 (D32/R5, 08) RE525-LF 518-5910 160x233.4 mm 53x89 Single-Sided Round DIN 41612 (C-96/abc) RE840-LF DIN Type Matrixboard Matrix boards with 1mm holes on a 2.54mm pitch.

Product Detail

New items

RE3001-LF, Roth Elektronik

Roth Elektronik - RE3001-LF Eurocard for Arduino Applications The RE3001-LF Eurocard is a two-sided laboratory board for Arduino applications. The Eurocard has been designed in an epoxy glass hard fabric and is 100mm x 160mm in dimension. Expoxy glass hard fabric FR4 1.50mm Two-sided laboratory board for Arduino applications 100mm x 160mm dimension Laboratory board for Arduino applications Epoxy glass hard fabric FR4 1.50 mm Two-sided 35 μm Cu Plated-through (PTH) Hot tinned (HAL lead free) Hole matrix field in 2.54mm raster Bored Ø 1.10 mm Soldering islands 2.20 x 2.20 mm 4 Potential paths Placement print for the following components: 8-bit AVR micro controller ATmega328P Serial connection USB connection DIN Type Matrixboard Matrix boards with 1mm holes on a 2.54mm pitch.

Product Detail

New items

RE100-HP, Roth Elektronik

RE100-HP Prototype Board 1.5 mm FR2 phenol resin-laminated paper Organic surface protection (OSP) Technical specifications Size: 100 x 160 mm Copper lamination: 35 μm, one side Soldering islands: 37 x 62 / Ø 2.2 mm Hole pattern: 2.5 x 2.5 mm Hole diameter: 1 mm DIN Type Matrixboard Matrix boards with 1mm holes on a 2.54mm pitch.

Product Detail

New items

61000-007, nVent SCHROFF

Eurocard Covers Plastic circuit board covers Mechanical protection for soldered side Available for 100 x 160 mm Eurocards Conductive Inside with insulating coating Conductive outer coating Surface resistance ≤ 1 Ω

Product Detail

New items

10-27563, Vero Technologies

Single-Sided Microboard Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card. They are, therefore, more suited to lower clock speed, non-critical applications. DIN Type Stripboards Suitable for use with the KM6-II eurocard sub-rack systems The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end. The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered. Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard. Note Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.

Product Detail