Rates
10000+
£ 0.017
Products Found: 1145
Showing Results For: Ferrite Beads
Ferrite Beads
FILTERS
Filters
Rates
10+
£ 0.058
100+
£ 0.047
500+
£ 0.044
Availability
3998 In Stock
Rates
10+
£ 0.088
100+
£ 0.076
200+
£ 0.054
Availability
2988 In Stock
Rates
10+
£ 0.095
100+
£ 0.083
200+
£ 0.058
Availability
2998 In Stock
Showing
1 -
New Items
New items
MPZ1608S601ATA00, TDK
The TDK MPZ Chip Beads for power lines are offered in many sizes in its capacity as an EMC countermeasure component. It supports compact devices that need smaller spaces. TDK MPZ Chip Beads can cope with a high current due to their low DC resistance. Used in applications such as noise removal for mobile devices such as smartphones and tablet terminals, and various modules, noise removal for PCs and recorders, household appliances such as STBs, smart grids, and industrial equipment.
Noise reduction solution for power line
Compared to the MMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption
Performs well even in signal lines where low direct current resistance is requir
New items
74273002, Wurth Elektronik
Triple/Quadruple EMC Interference Suppression Chokes, Ferrite Bridges
Interference suppression chokes with NiZn ferrite interference suppression core
Ideal for absorption of common-mode and series-mode interference in the EMC range
The impedance (e.g. 4 windings) or current (parallel connection) can be increased depending on the layout
Single use applies a power-compensated triple or quadruple choke to the signal
A double power-compensated choke can be achieved by wiring with 2x2 windings
High current carrying capacity of typically 4A
Wideband filter effect due to NiZn absorber ferrite core
HF common-mode choke for 2, 3 or 4 wires in one component
Compact design
Applications:
EMC filter in the range of common-mode and series-mode interference, wideband power supply filter. Data or measuring signal filter for RS-232, sensor inputs etc.
Type
Filter branches
742 730 02
4
742 730023
4
New items
28C0236-0BW-10, Laird Technologies
EMI Suppression Beads for Round Cables
Broad selection with guaranteed impedance specifications over a wide frequency range
New items
742863160, Wurth Elektronik
High-Speed Multilayer Ferrite SMD - WE-CBF HF Series
Excellent anti-EMI properties and low DC resistance
Effective suppression range due internal layout
In comparison to the WE-CBF series, the WE-CBF HF Series has a three times greater impedance at 1GHz
Particularly suited to the suppression of signal lines in the high frequency range
Applications:
Fast data lines: CPU, highspeed bus systems, HDD
Modified internal layout increases the effective suppression range
The impedance at 1 GHz are at least 3 times higher compared to the WE-CBF product family
Operating temperature: –55 °C to +125 °C
Especially for the suppression of signal lines in the high frequency range
For fast data lines: CPU, highspeed bus systems, HDD
New items
New items
BLM02KX100SN1D, Murata
The Murata BLM02K series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 10 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
New items
BLM18KG700TN1D, Murata
SMD 0603 Ferrite Filters- BLM18K Series
These filters are designed to function as resistors within interference frequency ranges
Removal of interference in the frequency range up to GHz
Application: removal of interference for mobile telephony
New items
BLE18PK100SN1D, Murata
The Murata BLE18PK series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
New items
BLM15HD182BH1D, Murata
The Murata BLM15HD series chip ferrite bead has excellent frequency impedance characteristics. It is suitable for noise suppression in 1GHz or higher frequency. It can be used in high current circuits due to its low DC resistance. It has impedance of 1800 ohm.
No Lead production using Ni+Sn plating in termination
Operating temperature range from -55 °C to 125 °C
New items
BLM18SP221SH1D, Murata
The Murata BLM18SP series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 220 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
New items
BLM15PE221SH1D, Murata
The Murata BLM15PE series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It has impedance of 220 ohm.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
New items
