The SAM OUTILLAGE Lamp Holder or Magnetic holder for handhelds are ideal to fix your portable music player on a fixed support.
High power magnet
2 Velcro
T8/T12 Snap-Fit Lamp Holder
A range of White BJB T8/T12 fluorescent lamp holders with push fit mounting for enclosed cut-outs. These snap-fit lamp holders are designed for the best possible fit in the metal luminaire housing. The snap-in elements accommodate for different metal thicknesses and a secure easy fit to assembly. The housing material and Airpass-Rotor feature makes the T8/T12 bottom wiring lamp holder ideally practical and cost friendly. Giving you confidence that the holder has optimal heat dissipation and a secure lamp fit.
Features & Benefits
Airpass-Rotor
Push fixing
A pair of lamp holders provides a lamp length tolerance compensation of 3 mm
Designed for enclose cut-outs
Bottom wiring
Product Application Information
Suited to almost all lighting schemes installed in commercial and industrial premises. Ideal for custom built assemblies using T12 and T8 standard fluorescents, circular fluorescents and 2D lamps.
Twin, Screw Mount
Twin tungsten halogen lampholder designed for use with a 500W R7s fitting (118mm). Rated at 6A, 250V
Screw fixing
Wires: Cu, nickel plated
0.75 square mm, with ferrule
Insulation: PTFE
Cable length: 220 mm
Brass Lampholders
Note
All brass lampholders are supplied with shade rings. They also feature a safety device that ensures they are switched off when no lamp is fitted. Switch versions only. Stock Numbers 171-089 & 171-095 cannot be used with Stock Number 482-3728.
SES E14
Moulded E14 lampholder suitable for screw-on, snap-in or push-in fixing. A suitable M10x1 threaded snap-on insulating cover is available 293-1108. Both cover and lampholder are required for operation.
Screw & Bayonet Lampholders
VCC PCH Series Horizontal PCB LED Holder
VCC PCH series horizontal PCB mount LED holder for 5 mm round or rectangular shape LEDs with or without a flange. The PCH series can accept bi-lead or tri-lead LEDs and can be stacked together with its dovetail interlocking feature.
Black nylon high contrast housing
Suitable for 5 mm LEDs
Right angle mounted
LED Mounting Hardware - VCC
E14 and E27 sockets
Black, thermohardening resin sockets for E14 and E27 bulbs, 60 W maximum, supplied as 3 pre-screwed parts.
Copper alloy ferrule; cap with threaded M10 metal connector with stopper and anti-rotation locking screw.
Half-threaded sleeve with ferrule in insulating material.
The corresponding rings must be ordered separately, E27 ring RS Stock no
220-3093
, E14 ring RS Stock no
220-3071
.
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Lamp Holders and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Lamp Holders or any other product.
This depends on the Lamp Holders individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Lamp Holders and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Lamp Holders.
Yes. We keep updating our stock frequently and if a product like Lamp Holders is not in stock then we will let you know.