Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 322

Showing Results For: Enclosure Heaters

Enclosure Heaters


FILTERS
Filters
Showing
1 -

Rates

1+
£ 48.15
10+
£ 46.51
25+
£ 44.05
Availability
91 In Stock

Rates

1+
£ 51.67
Availability
81 In Stock

Rates

1+
£ 36.45
Availability
19 In Stock

Rates

1+
£ 53.31
10+
£ 51.49
25+
£ 48.79
Availability
54 In Stock

Rates

1+
£ 180.11
10+
£ 164.61
25+
£ 159.03
Availability
83 In Stock

Rates

1+
£ 51.06
10+
£ 49.46
25+
£ 47.96
Availability
1 In Stock

Rates

1+
£ 69.89
10+
£ 67.53
25+
£ 63.96
Availability
3 In Stock

Rates

1+
£ 80.49
10+
£ 77.75
25+
£ 73.65
Availability
54 In Stock

Rates

1+
£ 91.83
Availability
33 In Stock

Rates

1+
£ 232.54
Availability
32 In Stock

Rates

1+
£ 150.10
5+
£ 139.58
12+
£ 132.34
Availability
99 In Stock

Rates

1+
£ 30.70
10+
£ 29.74
25+
£ 27.93
Availability
161 In Stock

Rates

1+
£ 165.11
5+
£ 151.89
12+
£ 145.30
Availability
82 In Stock

Rates

1+
£ 168.40
5+
£ 156.61
12+
£ 148.19
Availability
6 In Stock

Rates

1+
£ 37.56
10+
£ 36.32
25+
£ 34.36
Availability
121 In Stock

Rates

1+
£ 99.74
5+
£ 92.75
12+
£ 87.77
Availability
69 In Stock

Rates

1+
£ 70.60
Availability
46 In Stock

Rates

1+
£ 199.01
5+
£ 194.04
12+
£ 189.05
Availability
2 In Stock

Rates

1+
£ 166.58
Availability
36 In Stock

Rates

1+
£ 97.70
Availability
1 In Stock

Rates

1+
£ 23.38
10+
£ 22.59
25+
£ 21.39
Availability
48 In Stock

Rates

1+
£ 385.53
Availability
34 In Stock

Rates

1+
£ 32.31
10+
£ 31.21
25+
£ 29.59
Availability
32 In Stock

Rates

1+
£ 97.58
10+
£ 94.26
25+
£ 89.28
Availability
95 In Stock

Rates

1+
£ 96.40
10+
£ 93.11
25+
£ 88.20
Availability
13 In Stock
Showing
1 -

New Items
New items
06022.0-00, STEGO

06022.0-00, STEGO

Touch-Safe Heater Touch-Safe heaters are designed for use in every application and area where enclosures and cases that house electrical / electronic components must be heated to avoid condensation and low temperatures. The aluminium heater body is covered with a plastic housing. This plastic housing enables the surface temperature to be significantly decreased in comparison to conventional aluminium heaters. With ever-increasing packing densities within panels and enclosures, this allows the gap between the heater and panel components to decrease. Some Touch-Safe models have an integrated thermostat. Operating voltage 120-240Vac/dc (Min 110v , Max 265v) Small size Double-insulated Quick DIN rail mounting Touch-safe screw terminals Approvals VDE; UL DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
FGC3000, DBK Enclosures

FGC3000, DBK Enclosures

Cirrus 60 Fan Heater High power to size ratio - 3 power settings Lightweight and easy to fit Harness length 240mm Electrical Protection Class II Independent fan circuit to aid climate cooling Operating temperature range -10 → +70°C Storage temperature range -40 → +70°C DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
02701.0-00, Stego Elektrotechnik

02701.0-00, Stego Elektrotechnik

Fan Heater Enclosed heater with 0-60°C thermostatic control and LED status indicator Self regulating PCT heating elements Thermal cut-out Class II insulation Note Below 140Vac/dc heating performance is reduced by approx 10% Mount as shown in photograph DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
DAH2001A, Hoffman Enclosures

DAH2001A, Hoffman Enclosures

Hoffman Electric Enclosure Heaters Hoffman enclosure heaters are designed to protect mechanical, electrical and electronic equipment from low temperatures, condensation and corrosion. These thermostatically controlled, fan-driven heaters maintain a stable enclosure temperature. Fan draws cool air from the bottom of the enclosure and passes across the thermostat and heating element before being released into the enclosure cavity. Heated air is discharged through the top of the heater unit. Aluminium housing Thermostat range adjustable from 0 F to 100 F (-18 C to 38 C) Ball bearing fan Terminal strip with clamp connector that accepts both solid and stranded wire
New items
ACH100 80W 110V, Pentagon Electrical Products

ACH100 80W 110V, Pentagon Electrical Products

HVR Pentagon Anti-Condensation Heaters HVR Pentagon anti-condensation heaters have been designed for use where a low wattage heater is required to prevent condensation. They comprise a vitreous enamelled resistor mounted in a sheet steel case and have a removable perforated sheet steel cover. There is a cable entry grommet at each end and M4 terminal screws are provided on the resistor. Applications include switch and control gear cubicles. Vitreous enamelled resistor mounted in a sheet steel case. Removable perforated sheet steel cover. Note The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
New items
02821.0-11, Stego Elektrotechnik

02821.0-11, Stego Elektrotechnik

Compact Fan Heater with Thermostat, CSF 028 Series These compact fan heaters from Stego prevent the formation of condensation and provide even temperature within the enclosure. The small size makes them suitable for enclosures with a high component density. Integrated tamper proof, pre-set thermostat Fast and easy tool free connection Available with screw mount or DIN rail clip DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
SK3105350, Rittal

SK3105350, Rittal

Enclosure Heaters - SK Series Snap-fastening onto 35 mm support rails EN 50 022 or direct screw-fastening onto the mounting plate PTC technology with Computational Fluid Dynamics assisted design for superior heating performance Requires external Thermostat and or Hygrostat to regulate heating in the enclosure Fan assisted heat flow on models 200W and above DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
06030.1-00, Stego Elektrotechnik

06030.1-00, Stego Elektrotechnik

The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. Low surface temperature Compact size Wide voltage range Double insulated protection DIN rail mountable
New items
03201.0-01, STEGO

03201.0-01, STEGO

Slimline High Performance Fan Heaters - CSF Series The CSF series of slimline high performance fan heaters prevent formation of condensation and frost and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. Compact design Double insulated DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
New items
FLH400 17040010107, Pfannenberg

FLH400 17040010107, Pfannenberg

Fan Heater - Pfannenberg FLH 400 Plug-in terminal connection Suitable for both 50Hz and 60Hz Duty cycle 100% Heating element is resistance type with temperature monitor Mounting position is airflow vertical, exit at top Airflow 50m 3 /h (50Hz), 61m 3 /h (60Hz) Constructed from aluminium extrusion, clear anodised Binding post connection capacity: single filament 2 x 0.5 - 2.5mm 2 ; fine multi-filament (soldered, wire and sleeve, pin terminal) 2 x 0.5 - 1.5mm 2 Snap-in mounting for 35mm DIN-rail in accordance with EN 50022 Operating temperature -20°C to +70°C Storage temperature -40°C to +70°C Note Guard adds 3mm to height dimension quoted Accessories available separately include thermostats FLZ510, FLZ520, FLZ530, hygrostat FLZ600 Approvals UL
New items
02031.0-00, STEGO

02031.0-00, STEGO

Stego Hazardous Area Compact Heaters, CREx 02 Series Introducing the Compact convection heater of temperature classes T3, T4 and T5 for use in areas with explosion hazard for prevention of formation of condensation and temperature fluctuations. Also benefitting in protection against frost in control and switch cabinets, and in measuring equipment. Features and Benefits • For areas with explosion hazard • Large convection surface • Clip and screw flange fixing • Ready-to-use with strain relief • Maintenance free • Temperature class T3 (200°C max) 50 W to 250 W • Temperature class T4 (135°C max) 50 W to 200 W • Temperature class T5 (100°C max) 50 W to 100 W
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Enclosure Heaters and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Enclosure Heaters or any other product.
This depends on the Enclosure Heaters individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Enclosure Heaters and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Enclosure Heaters.
Yes. We keep updating our stock frequently and if a product like Enclosure Heaters is not in stock then we will let you know.