Featured Products
Stego Elektrotechnik DIN Rail Mount Electrical Sockets- World Socket Standards A range of DIN rail mounted...
Fan Heater Enclosed heater with 0-60°C thermostatic control and LED status indicator Self regulating PCT he...
Conduction/Convection Stego enclosure heater elements are temperature limiting compact heaters. Designed sp...
Cable and Female Connector for LED Enclosure Lamps Connection cable for LED enclosure lamps LED 025 series,...
Compact Fan Heater with Thermostat, CSF 028 Series These compact fan heaters from Stego prevent the formati...
Outdoor Filter Fans IP55 Simple maintenance (Dust filter change from outside) Impact resistant plastic casing material Exhaust filter to match 4...
Stego Elektrotechnik DIN Rail Mount Electrical Sockets- World Socket Standards A range of DIN rail mounted electrical sockets which can be quick...
LED Enclosure Lamps Clip Fixing These Enclosure light fittings have a very long service life, thanks to the...
Stego Filter Fans Plus, FPI/FPO Series The Filter Fan Plus series has been designed to optimise climate eff...
The appliance holder STEGOFIX PLUS is the flexible alternative to a 35 mm DIN rail. It allows for a quick and easy installation of small devices...
Popular Categories For Stego Elektrotechnik
Popular Items
Popular items
03503.0-01, Stego Elektrotechnik
Stego Elektrotechnik DIN Rail Mount Electrical Sockets- World Socket Standards
A range of DIN rail mounted electrical sockets which can be quickly fitted and connected in enclosures, allowingthe use of auxiliary products such as hand lamps, measuring devices, soldering irons etc.
Available with and without fuse, and in many world socket standards
Quickly connected
3 x pressure clamps for stranded and rigid wire 0.5-2.5mm² connection
Popular items
02701.0-00, Stego Elektrotechnik
Fan Heater
Enclosed heater with 0-60°C thermostatic control and LED status indicator
Self regulating PCT heating elements
Thermal cut-out
Class II insulation
Note
Below 140Vac/dc heating performance is reduced by approx 10%
Mount as shown in photograph
DIN Rail Mount Enclosure Heaters
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
Popular items
Popular items
01624.0-00, Stego Elektrotechnik
Conduction/Convection
Stego enclosure heater elements are temperature limiting compact heaters. Designed specifically to prevent condensation within the enclosure these elements are self regulating and offer a dynamic heat up. Small semiconductor heater elements offer an energy saving solution.
Screw mounting or clip fixing
Class II insulation
Mounting on an aluminium plate increases power consumption and decreases surface temperature proportionately
No need for thermostat
Popular items
244390, Stego Elektrotechnik
Cable and Female Connector for LED Enclosure Lamps
Connection cable for LED enclosure lamps LED 025 series, with femal connector and open end.
Popular items
02821.0-11, Stego Elektrotechnik
Compact Fan Heater with Thermostat, CSF 028 Series
These compact fan heaters from Stego prevent the formation of condensation and provide even temperature within the enclosure. The small size makes them suitable for enclosures with a high component density.
Integrated tamper proof, pre-set thermostat
Fast and easy tool free connection
Available with screw mount or DIN rail clip
DIN Rail Mount Enclosure Heaters
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
Popular items
11821.0-00, Stego Elektrotechnik
Outdoor Filter Fans IP55
Simple maintenance (Dust filter change from outside)
Impact resistant plastic casing material
Exhaust filter to match
468-2785
Outdoor exhaust filter to match
Approvals
7777
Popular items
03503.0-00, Stego Elektrotechnik
Stego Elektrotechnik DIN Rail Mount Electrical Sockets- World Socket Standards
A range of DIN rail mounted electrical sockets which can be quickly fitted and connected in enclosures, allowingthe use of auxiliary products such as hand lamps, measuring devices, soldering irons etc.
Available with and without fuse, and in many world socket standards
Quickly connected
3 x pressure clamps for stranded and rigid wire 0.5-2.5mm² connection
Popular items
02540.1-03, Stego Elektrotechnik
LED Enclosure Lamps Clip Fixing
These Enclosure light fittings have a very long service life, thanks to the use of LED technology.
LED light fittings are the ideal upgrade of conventional lighting, providing an economical replacement, with great energy savings and very low maintenance costs. The LED 025 Series fits in all types of panels and enclosures, they are ideal especially where space is limited. These LED lamps are operated by an on/off switch. The power output of these enclosure light fittings allows up to 10 lamps to be connected to each other (5 lamps for the 12Vdc version), connectors and cables are not included, they can be ordered separately, see accessories.
The LED lamps come with clip holders for clip fixing; the clip holders are screwed to the cabinet wall, the lamp is snapped into the clip holder and can be turned as needed for perfect illumination.
Wide voltage range
Integrated power unit
On/off switch
Clip holders fixing
Daylight colour, 6,500k temperature
60,000 hours average life
Note
The lamp must not be used for household lighting
Popular items
01880.0-00, Stego Elektrotechnik
Stego Filter Fans Plus, FPI/FPO Series
The Filter Fan Plus series has been designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. Reducing the heat inside the enclosure improves performance and reliability of the electronic items and ultimately costs are kept lower.
FPI or FPO
To choose which items are best for your application first decide which you need, FPI or FPO. Both systems utilise a new air-flap on the outlet which gives a higher degree of airflow to expel heated air more efficiently.
The FPI system is for your more standard set-ups. A filtered fan is placed at the lower part of the enclosure pulling cooler air in. The air works its way up through the enclosure until it is expelled through the air-flap outlet mounted at the top end of the enclosure.
The FPO system has a filtered inlet placed at the lower end of the enclosure but does not include the fan. Instead the fan is placed on the outlet pushing air out of the enclosure which ultimately means the air is drawn in from the lower intake. This system is better for enclosures suffering from hot air pockets at the top of the enclosure.
Ordering
Please note when ordering you need to order the inlet and outlet units separately. As an example, for a 230 V ac, 92 mm, FPI system you need to order item
915-9987
(filter fan inlet) and item
916-0019
(outlet). Various sizes are available and each unit has its compatible partner listed in essential accessories for that size. Each size also has a 230 V ac and a 110 V ac fan to choose from.
Mounting
The front section mounts to the rear section with a simple ratchet type system making instillation quick and simple. It accomm...
Popular items
Popular items
09550.2-05, Stego Elektrotechnik
The appliance holder STEGOFIX PLUS is the flexible alternative to a 35 mm DIN rail. It allows for a quick and easy installation of small devices or accessory equipment intended for DIN rail mounting. STEGOFIX PLUS is suitable for devices with a clip width of max. 66 mm, offering a convenient mounting method for almost any application: screw mounting with 25 mm pitch, high-performance adhesive tape or rubberized neodymium magnets
Alternative to 35 mm DIN rail
Easy/flexible installation
For devices and sockets with DIN rail mounting clip
Screw mounting
Self-adhesive tape mounting
Magnet mounting
New Items
New items
01880.9-00, Stego Elektrotechnik
Stego Filter Fans Plus, FPI/FPO Series
The Filter Fan Plus series has been designed to optimise climate efficiency within enclosures and cabinets containing electronic/electrical components. The electronic components generate heat and these units disperse that heat with cooler, filtered air from outside the enclosure. Reducing the heat inside the enclosure improves performance and reliability of the electronic items and ultimately costs are kept lower.
FPI or FPO
To choose which items are best for your application first decide which you need, FPI or FPO. Both systems utilise a new air-flap on the outlet which gives a higher degree of airflow to expel heated air more efficiently.
The FPI system is for your more standard set-ups. A filtered fan is placed at the lower part of the enclosure pulling cooler air in. The air works its way up through the enclosure until it is expelled through the air-flap outlet mounted at the top end of the enclosure.
The FPO system has a filtered inlet placed at the lower end of the enclosure but does not include the fan. Instead the fan is placed on the outlet pushing air out of the enclosure which ultimately means the air is drawn in from the lower intake. This system is better for enclosures suffering from hot air pockets at the top of the enclosure.
Ordering
Please note when ordering you need to order the inlet and outlet units separately. As an example, for a 230 V ac, 92 mm, FPI system you need to order item
915-9987
(filter fan inlet) and item
916-0019
(outlet). Various sizes are available and each unit has its compatible partner listed in essential accessories for that size. Each size also has a 230 V ac and a 110 V ac fan to choose from.
Mounting
The front section mounts to the rear section with a simple ratchet type system making instillation quick and simple. It accomm...
New items
02540.0-00, Stego Elektrotechnik
LED Enclosure Lamp Magnet Fixing
These Enclosure light fittings have a very long service life, thanks to the use of LED technology.
LED light fittings are the ideal upgrade of conventional lighting, providing an economical replacement, with great energy savings and very low maintenance costs. The LED 025 Series fits in all types of panels and enclosures, they are ideal especially where space is limited. These LED lamps are operated by an on/off switch. The power output of these enclosure light fittings allows up to 10 lamps to be connected to each other (5 lamps for the 12Vdc version), connectors and cables are not included, they can be ordered separately, see accessories.
The LED lamps come with magnet fixing, for easy positioning in any steel cabinet or enclosure.
Wide voltage range
Integrated power unit
On/off switch
Magnet fixing
Daylight colour, 6,500k temperature
60,000 hours average life
Note
The lamp must not be used for household lighting
New items
244390, Stego Elektrotechnik
Cable and Female Connector for LED Enclosure Lamps
Connection cable for LED enclosure lamps LED 025 series, with femal connector and open end.
New items
09550.2-05, Stego Elektrotechnik
The appliance holder STEGOFIX PLUS is the flexible alternative to a 35 mm DIN rail. It allows for a quick and easy installation of small devices or accessory equipment intended for DIN rail mounting. STEGOFIX PLUS is suitable for devices with a clip width of max. 66 mm, offering a convenient mounting method for almost any application: screw mounting with 25 mm pitch, high-performance adhesive tape or rubberized neodymium magnets
Alternative to 35 mm DIN rail
Easy/flexible installation
For devices and sockets with DIN rail mounting clip
Screw mounting
Self-adhesive tape mounting
Magnet mounting
New items
06030.1-00, Stego Elektrotechnik
The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design.
Low surface temperature
Compact size
Wide voltage range
Double insulated protection
DIN rail mountable
New items
01821.0-02, Stego Elektrotechnik
Outdoor Filter Fans IP55
Simple maintenance (Dust filter change from outside)
Impact resistant plastic casing material
Exhaust filter to match
468-2785
Outdoor exhaust filter to match
Approvals
7777
New items
03504.0-01, Stego Elektrotechnik
Stego Elektrotechnik DIN Rail Mount Electrical Sockets- World Socket Standards
A range of DIN rail mounted electrical sockets which can be quickly fitted and connected in enclosures, allowingthe use of auxiliary products such as hand lamps, measuring devices, soldering irons etc.
Available with and without fuse, and in many world socket standards
Quickly connected
3 x pressure clamps for stranded and rigid wire 0.5-2.5mm² connection
New items
02701.0-00, Stego Elektrotechnik
Fan Heater
Enclosed heater with 0-60°C thermostatic control and LED status indicator
Self regulating PCT heating elements
Thermal cut-out
Class II insulation
Note
Below 140Vac/dc heating performance is reduced by approx 10%
Mount as shown in photograph
DIN Rail Mount Enclosure Heaters
Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.
Don’t hesitate to ask questions for better clarification.