Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

Products Found: 14

Showing Results For: Durometers

Durometers


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
RS_332-0256, NEUTRAL
23 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 265.23
Kern
HMM., Kern
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 913.63
1 +
£ 913.63
Kern
Rohs Verified
HMO., Kern
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1564.01
Kern
Rohs Verified
HO 5K, Kern
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 4273.90
Rohs Verified
HDA 100-1., Kern
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 325.18
Kern
Rohs Verified
HK-DB, Kern
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1176.87
Sauter
Rohs Verified
HMM, Sauter
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1284.08
HBA 100-0, Sauter
23 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 123.62
Rohs Verified
HB0 100-0, Sauter
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 147.33
Sauter
Rohs Verified
HO 2K, Sauter
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 5595.47
HBD 100-0, Sauter
15 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 165.02
Sauter
Rohs Verified
HN-D, Sauter
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 1298.46
Mitutoyo
Rohs Verified
811-334-10, Mitutoyo
Pre Order
Check Stock & Lead Times Packaging Options
1 +
£ 1181.10
Mitutoyo
Rohs Verified
811-331-10, Mitutoyo
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 670.53
Showing
1 -

New Items
New items
HO 2K, Sauter

HO 2K, Sauter

Kern Ultrasound Hardness Testing Device HO Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with a defined force. After that the tip is moved into high-frequency ultrasound vibrations, the hardness is derived from the attenuation. Ideal for measuring small forgings, castings, welding points, punched parts, casting tools, ball bearings, flanks of gear wheels and for measuring the influence of warmth or heat. Features and Benefits • Advantages compared with Rockwell and Brinell: Less test force and therefore only microscopic, small penetrations means that the testing is less destructive • Advantages compared with Vickers: Demanding optical measuring is not required. You can therefore carry out measurements directly on-site, for example, on a permanently installed workpiece • Advantages compared with Leeb: The high requirements for the weight of the test object are no longer required • Mini Statistics Function: Display of the measuring result, the number of measurements, the maximum and minimum value as well as the average value and the standard deviation • Measurement data memory saves up to 1000 measurement groups each with 20 individual values Calibration: The device can be adjusted to standard hardness comparison plates and to individual reference standards Standards DIN 50159-1-2008, ASTMA1038-2005, JB/T9377-2013 Parallels, Surface Finish & Hardness Surface Finish Any machined component has a surface geometry which consists of three basic elements: Form or Curvature - Whet...
New items
HN-D, Sauter

HN-D, Sauter

HN-D Digital Hardness Tester The HN-D Pen style Leeb Hardness Tester from Sauter. Offering advanced features, ideal for a wide range of applications. The Hardness Tester works by accelerating the internal bounce module against the tested item. Depending on object hardness, the kinetic energy of the module is absorbed. Speed reduction is measured and converted to hardness values. User-friendly operation LCD display 360° Measurement directions possible Measurement value display Internal data memory USB data output Mains or battery powered Parallels, Surface Finish & Hardness Surface Finish Any machined component has a surface geometry which consists of three basic elements: Form or Curvature - Whether the surface has irregular bumps or dimensional changes Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns) Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure) Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
New items
HBA 100-0, Sauter

HBA 100-0, Sauter

Sauter Hardness Meter The Sauter hardness meter is an analogue shore a tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'. It is suitable for use with rubber, elastomers, neoprene, silicone, vinyl, soft plastic, felt leather and similar materials. Features and Benefits Auto OFF function to preserve the batteries Compact handheld durometer with a drag indicator Maximum precision is 3% Particularly recommended for internal comparison measurement Maximu mode holds the maximum value taken on the display Point mode shows one instant value Operating temperature ranges between 0°C and 40°C
New items
HBD 100-0, Sauter

HBD 100-0, Sauter

Shore Hardness Tester, Analogue HB Series hardness tester with slave pointer for measuring penetration depth Shore A: rubber, elastomer, neoprene rubber, silicon rubber, vinyl, soft plastics, felt, natural leather and similar materials Shore C/0: foam, sponge Shore D: plastics, synthetic resin, resopal, epoxide, perspex etc. Max. mode for recording peak values Point mode shows stable measurement value Dimensions: L x W x H: 115 x 60 x 25 mm Weight: 160 g Supplied with High-quality wooden box Parallels, Surface Finish & Hardness Surface Finish Any machined component has a surface geometry which consists of three basic elements: Form or Curvature - Whether the surface has irregular bumps or dimensional changes Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns) Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure) Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
New items
HMM., Kern

HMM., Kern

The Kern product is a advanced features for demanding applications. It is made up of plastic casing material with 1 % Precision. Maximum operating temperature is 50 °C Minimum ambient temperature is 0 °C
New items
HMO., Kern

HMO., Kern

The Kern product is a advanced features for professional applications. It is made up of plastic casing material with 1 % Precision. Charging time is 8 h Input voltage is 110 to 240 V
New items
811-331-10, Mitutoyo

811-331-10, Mitutoyo

HARDMATIC Durometer Professional analogue and digital durometers designed to test a range of different materials. SR44 Battery. Parallels, Surface Finish & Hardness Surface Finish Any machined component has a surface geometry which consists of three basic elements: Form or Curvature - Whether the surface has irregular bumps or dimensional changes Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns) Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure) Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
New items
HB0 100-0, Sauter

HB0 100-0, Sauter

Kern Analogue Shore Hardness Tester A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage. Typical Application • Measurement of penetration (Shore) Feature and Benefits • Mechanical shore hardness meter • For internal comparison measurement. Standard calibrations e.g. to DIN 53505 are often not possible because of narrow standard tolerances • Shore A: Rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material • Shore D: Plastics, Formica, epoxies, plexi glass etc. • Shore A0: Foam, sponge etc. • Max Mode: Holds the maximum value in the display • Point Mode: Shows one instant value • Can be attached to test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D) • Tester Shore A0
New items
HO 5K, Kern

HO 5K, Kern

The Kern product is a premium UCI hardness testing device for Rockwell, brinell and vickers. It is made up of Metal lacquered casing material and has statistical function, visual ready signal. Charging time is 8 h Input voltage is 110 to 240 V
New items
HDA 100-1., Kern

HDA 100-1., Kern

The Kern product is a professional shore hardness tester. It is made up of plastic casing material with precision 1 %, data hold function, peak function. Maximum operating temperature is 50 °C Minimum ambient temperature 0 °C
New items
HMM, Sauter

HMM, Sauter

Sauter Digital Leeb Hardness Tester The Sauter HMM series digital Leeb hardness tester has an impact-resistant body. A tungsten carbide test tip is propelled by spring force against the surface to be tested, from which it rebounds. This hardness tester works by accelerating the internal bounce module against the tested item. Depending on object hardness, the kinetic energy of the module is absorbed and speed reduction is measured and converted to hardness values. The voltages are proportional to the velocities and are processed and displayed as the hardness value 'L' by the meter. This can also measure hardness in Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD) and tensile strength (MPa). Supplied with: Impact sensor Wireless IR printer Calibration block Hard carry case Features and Benefits Auto OFF function Automatic compensation function permits measurement in all directions (360°) Automatic recognition of the external impact sensor Battery charge indicator External impact sensor (Type D) included High level of mobility and flexibility Highly accurate of ±6HL Internal memory for up to 9 data groups, with up to 9 values per group Large, easy to read display with backlight Maximum precision of 1% Battery-powered, 3 x AAA Wireless IR printer included Mini statistics function Operating temperature ranges between 0°C and 50°C
New items
811-334-10, Mitutoyo

811-334-10, Mitutoyo

HARDMATIC Durometer Professional analogue and digital durometers designed to test a range of different materials. SR44 Battery. Parallels, Surface Finish & Hardness Surface Finish Any machined component has a surface geometry which consists of three basic elements: Form or Curvature - Whether the surface has irregular bumps or dimensional changes Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns) Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure) Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Durometers and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Durometers or any other product.
This depends on the Durometers individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Durometers and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Durometers.
Yes. We keep updating our stock frequently and if a product like Durometers is not in stock then we will let you know.