Bivar SLM Series PCB LED Mounts
The SLM series from Bivar is a family of LED spacers for through-hole LEDs. They are designed to elevate the LED from the PCB and offer protection from high temperature environments. SLM spacer mounts feature internal tapered pin dividers to support the LED pins.
LED Mounting Hardware, Bivar
Bivar H series Right Angle LED Mounts
The H series from Bivar is a family of LED spacers for through-hole LEDs. They are designed to elevate the LED from the PCB and offer protection from high temperature environments. H series spacer mounts feature internal tapered pin dividers to support the LED pins.
LED Mounting Hardware, Bivar
Bivar ELM 1 Series Self-Retaining LED Mounts
The ELM 1 series of LED spacers from Bivar are designed to fit 5mm (T1 3/4) LEDs. The ELM 1 self-retaining narrow profile LED mounts serve as a lead forming fixture while uniformly aligning and elevating LEDs making assembly easier, uniformity better and display enhancement simple.
Fit 5mm LEDs with 2 leads
Made from extruded PVC
LED Mounting Hardware, Bivar
Bivar H series Right Angle LED Mounts
The H series from Bivar is a family of LED spacers for through-hole LEDs. They are designed to elevate the LED from the PCB and offer protection from high temperature environments. H series spacer mounts feature internal tapered pin dividers to support the LED pins.
LED Mounting Hardware, Bivar
LUMAWISE drive LED holder Type Z50 On/Off series is an LED holder for Chip-on-Board (COB) LEDs where a DC/DC driver has been integrated into the holder itself. This allows luminaire designers to remove driver boxes from spot and track lighting, giving a more aesthetically pleasing solution and removing cost from the system.
LUMAWISE drive LED holder Type Z50 On/Off series is an LED holder for Chip-on-Board (COB) LEDs where a DC/DC driver has been integrated into the holder itself. This allows luminaire designers to remove driver boxes from spot and track lighting, giving a more aesthetically pleasing solution and removing cost from the system.
LUMAWISE drive LED holder Type Z50 On/Off series is an LED holder for Chip-on-Board (COB) LEDs where a DC/DC driver has been integrated into the holder itself. This allows luminaire designers to remove driver boxes from spot and track lighting, giving a more aesthetically pleasing solution and removing cost from the system.
LED Spacer (LZ Series), MAC8
Can be installed squarely on Ø 3, Ø 5 LED
Material
PPS resin, black (UL94V-0)
Colour
Black
Operating temperature range
-40 → +125 °C
Compatible LED
Ø 3, Ø 5 LED
Foot pitch
2.54 mm, 2.5 mm
Foot diameter
0.5□, Ø 0.5, Ø 0.6 and under, 0.6□ and under
Note
Insert the LED in this product and bend at a right angle.
LED Mounting Hardware, Mac 8
The Bivar IP68 Rated Sealing Gasket Lens Cap designed to provide ingress protection to LED status indication for applications exposed to harsh environments.
Lens profile flat
Panel cut-out round
IP Rated seal colour black
PCB width .118 in. (3.0mm)
Lens colour green
Bivar ELM 2 Series Self-Retaining LED Mounts
The ELM 2 series of LED spacers from Bivar are designed to fit 3mm (T-1) LEDs. The ELM 2 self-retaining LED mounts serve as a lead forming fixture while uniformly aligning and elevating LEDs making assembly easier, uniformity better and display enhancement simple.
Fit 3mm LEDs with 2 leads
Made from extruded PVC
LED Mounting Hardware, Bivar
Bivar ELM 4 Series Self-Retaining LED Mounts
The ELM 4 series of LED spacers from Bivar are designed to fit T1 3/4 LEDs. The ELM 4 self-retaining narrow profile LED mounts serve as a lead forming fixture while uniformly aligning and elevating LEDs making assembly easier, uniformity better and display enhancement simple.
Fit 3 mm or 5 mm LEDs with 2 leads
Made from extruded PVC
LED Mounting Hardware, Bivar
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like LED Holders and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding LED Holders or any other product.
This depends on the LED Holders individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for LED Holders and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including LED Holders.
Yes. We keep updating our stock frequently and if a product like LED Holders is not in stock then we will let you know.