Rates
10+
£ 3.10
Products Found: 993
Showing Results For: Standard Terminal Blocks
Standard Terminal Blocks
FILTERS
Filters
Showing
1 -
New Items
New items
2001-1202, Wago
The Wago 2-conductor through terminal block and nominal cross section of 1.5 mm², suitable for EX e II applications.
2-conductor through terminal block
Nominal cross section of 1.5 mm²
Side and center marking
For din-rail 35 x 15 and 35 x 7.5
Push-in cage clamp
Orange color
New items
2000-1203, Wago
The Wago 2-conductor through terminal block. It has universal connection for all connector types. Easy cable pre-assembly and on-unit wiring via vertical and horizontal cage clamp actuation.
2-conductor through terminal block
Nominal cross section of 1 mm²
Side and center marking
For din-rail 35 x 15 and 35 x 7.5
Push-in cage clamp
Red color
New items
BL 5.08/11/180 SN BK -1716560000, Weidmuller
Cable Mount Screw Terminals
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands.
Features and Benefits
Rated at 8 A / 250 V ac
Wire size 0.5 – 1.5 mm²
Female plugs provide space for labelling
Approvals
UL (E 60693); CSA (12400)
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
The PCB hole has a diameter of 1.3mm
Screw clamp types accept wire up to 1.5mm²
Tension clamp and IDC (screwless) options enable fast assembly times
Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
Polarising pins prevent mismatch connections.
Voltage Rating
250Vac
Temperature Rating
-20 to +100°C
Insulation stripping length
6 mm
PCB pitch
5.08 mm
PCB pin hole diameter
1.3 + ±0.1 mm
Life (cycles)
≥100
New items
New items
BLZF 5.08/13/180 SN -1707800000, Weidmuller
Tension Clamp Screwless Terminals
Socket connector screwless terminals on a 5.08mm pitch, give rapid insertion of prepared cables with the use of a standard flat-blade screw driver.
Features and Benefits
Tension clamp connection
Female plugs provide space for labelling and can also be coded
Approvals
UL (E 60693); CSA (12400)
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
The PCB hole has a diameter of 1.3mm
Screw clamp types accept wire up to 1.5mm²
Tension clamp and IDC (screwless) options enable fast assembly times
Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
Polarising pins prevent mismatch connections.
Voltage Rating
250Vac
Temperature Rating
-20 to +100°C
Insulation stripping length
6 mm
PCB pitch
5.08 mm
PCB pin hole diameter
1.3 + ±0.1 mm
Life (cycles)
≥100
New items
BL 5.08/08/180 SN BK -1716530000, Weidmuller
Cable Mount Screw Terminals
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands.
Features and Benefits
Rated at 8 A / 250 V ac
Wire size 0.5 – 1.5 mm²
Female plugs provide space for labelling
Approvals
UL (E 60693); CSA (12400)
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
The PCB hole has a diameter of 1.3mm
Screw clamp types accept wire up to 1.5mm²
Tension clamp and IDC (screwless) options enable fast assembly times
Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
Polarising pins prevent mismatch connections.
Voltage Rating
250Vac
Temperature Rating
-20 to +100°C
Insulation stripping length
6 mm
PCB pitch
5.08 mm
PCB pin hole diameter
1.3 + ±0.1 mm
Life (cycles)
≥100
New items
Y92F-52, Omron
The Omron DIN mounting adapter is used with E5EC ,E5AC and E58-CIFQ2 series.
DIN mounting adapter
E5CB mounting target
New items
2002-3217, Wago
The Wago triple-deck terminal block and ground conductor/through/through terminal block, pe/n/l.
Triple-deck terminal block
Ground conductor/through/through terminal block
Without marker carrier
For din-rail 35 x 15 and 35 x 7.5
Nominal cross section of 2.5 mm²
Push-in cage clamp
Gray color
New items
XW5S-P1.5-10RD, Omron
The Omron XW5S series short bars are short circuit short bars used by the wire screw tightening model terminal blocks .
Red colour cover
10 pole configuration
New items
2002-1307, Wago
TOPJOB series 3-conductor, 2.5 mm
2
V/J terminal blocks
Terminal blocks for TS 35 DIN Rails use CAGE CLAMP® technology and are 30% smaller than standard terminal blocks.
Features and Benefits
3 Conductors
Direct plug-in of rigid and flexible conductors with end tips, no tools required
Simple and quick bridging and test system
Easy and quick marking/labelling, using click-on markers on the central strip of the terminal block
Colour:
Green / Yellow
Rated section:
2.5 mm
2
(4 mm
2
)
Current:
24 A
Voltage:
800 V
No. of conductors:
2
Terminal width:
5.2 mm
Dimensions:
L 48.5 x H 33
New items
BL 5.08/14/180 SN BK -1716590000, Weidmuller
Cable Mount Screw Terminals
Socket connector screw terminals use a leaf-spring wire connection system to prevent the clamping screw digging into the cable and damaging individual strands.
Features and Benefits
Rated at 8 A / 250 V ac
Wire size 0.5 – 1.5 mm²
Female plugs provide space for labelling
Approvals
UL (E 60693); CSA (12400)
5.08mm Pitch -Weidmüller Omnimate Range
Weidmüller's Omnimate Range of 5.08mm pitch Two Part connectors allows wire-to-board connections through terminals using Leaf Spring and Spring Rising Clamp screw technology, or Tension Clamp and Push In screwless technology. The Weidmuller 8 Way Clamp Rising Terminal is suitable for a wide range of PCB design and connector uses.
The PCB hole has a diameter of 1.3mm
Screw clamp types accept wire up to 1.5mm²
Tension clamp and IDC (screwless) options enable fast assembly times
Moulded male headers in straight (open or closed end) 90° PCB pins or 135° headers
Polarising pins prevent mismatch connections.
Voltage Rating
250Vac
Temperature Rating
-20 to +100°C
Insulation stripping length
6 mm
PCB pitch
5.08 mm
PCB pin hole diameter
1.3 + ±0.1 mm
Life (cycles)
≥100
New items
BK 4/E -7906080000, Weidmuller
BK Series
Terminal blocks moulded in high grade melamine. The terminals feature clamping yoke technology that makes planning easier and optimises operational safety.
Features and Benefits
Each through termination is rated at 21 A/275 V
Accepts both stranded and solid conductors 0.5 mm to 4 mm
Screw connection
Recommended insulation stripping length 8 mm
Note
All blocks are 22 wide and 20 high, with 3.4Ø fixing holes.
Approvals
BAS 99ATEX3084U