Jumper Leads
FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications.
The product can be repeatably flexed without failure, reliable vibration- and break proof connection
No long preparation times for connecting PCBs, no cutting into sections, no preliminary work
Can be installed by most commonly used soldering techniques
High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously
Insulation
Nomex: UL Style 5295
PTFE: UL Style 2928
Equivalent Conductor Size
0.203mm²
Conductor Material
Cu/acc. QQ-W-343
Insulation Resistance (gnd,sig,gnd)
>1 GΩ
Operating Temperature
125°C
Soldering Temperature
250°C/4s
Current Rating
3A
Voltage Rating
300V
Dielectric Strength
1500Vac
Dimensions (mm)
Pitch
A
2.54
Length
B
25.4, 50.8, 76.2
Margin max
C
0.8
Margin min
C
0.25
Max Thickness
D
0.75
Mid Pin Thickness max
F
0.37
Mid Pin Thickness min
F
0.33
Pin Diameter max
E
0.53
Pin Diameter min
E
0.51
Min Bending Diameter
-
3.18
Note
These jumpers are suitable for use with the FLEXSTRIP® sockets range