Enrgtech

Deliver to

United Kingdom

Categories

Brands

Part Numbers

Top Products

0

We hope you are enjoying our new upgraded website. Bringing you faster search results and a greater variety of products. Please click here to share your comments/experience.

Showing Results For: Ribbon & Flat Cable

Ribbon & Flat Cable


New Items
New items
3M 25 Way Screened Round Ribbon Cable, 30.5 mm Width

3M 25 Way Screened Round Ribbon Cable, 30.5 mm Width

3M LSZH Round Shielded Cable A round, ribbon cable with low smoke, zero halogen insulation. Features and Benefits · Easier routing due to round construction · 28 AWG · Continual split/bond repeatallows for mass termination of IDC connectors · Dual shielding · Zippable primary cable Standards UL File Number: E42769, Style Number: 21683, IEC 61034-2:2005, NF X 70-100-2:2006, RoHS, UL Round Shielded Cable
New items
Ribbon Ribbon Cable Assembly 400mm 10, Ways Female to Female, QF50 to QF50

Ribbon Ribbon Cable Assembly 400mm 10, Ways Female to Female, QF50 to QF50

Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors 1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size. Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths. 1.27mm Molex QF-50 Single Beam Ribbon Cable Connectors
New items
TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match PB Plug, 150.5mm

TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match PB Plug, 150.5mm

TE Connectivity Micro-MaTch Value-Line IDC Ribbon Cable Assemblies, Male-on-Wire to Paddle Board A range of Micro-MaTch Value-Line IDC ribbon cable assemblies for use in wire to board interconnections. These Micro-MaTch ribbon cable assembles are terminated with a Male-on-Wire Micro-MaTch connector on one end and a Paddle Board Micro-MaTch connector on the other. The Micro-MaTch range of connectors have a compact, space saving design with a 1.27mm pitch. The IDC contacts have a contact spring system that prevents fretting corrosion. A positioning spring on the female contact absorbs movement between the male and female contacts caused by vibration and thermal expansion. Prevention of movement on the contact spot enables a gas tight connection to be made which makes the contact spring system fretting resistant. These Micro-MaTch IDC ribbon cable assemblies are available with 150 mm and 70 mm cable lengths. Features and Benefits Compact, space saving design Fully tin plated contacts Fretting corrosion resistant Gas tight connection Applications The Micro-MaTch Value-Line of connectors is designed for use in less demanding environments than the standard Micro-MaTch connectors. Applications include the following: Home automation and alarm equipment Mobile GPS devices Lighting Air and climate control units CCTV Building surface control Set top boxes, audio & video equipment Electronic voting machines Pay terminals Centreline 1.27mm (staggered) PC board thickness 1.6mm nominal PC board hole diameter 0.8mm for solder connections Flat cable to use Pitch 1.27mm; 28awg (stranded 0.8mm 2 , or solid dia. 0.30mm) Material-Housing Red glass filled thermoplastic polyester; UL94V-0) rating Contacts Phosphor bronze, with tin over nickel plating Contact resistance 10mΩ max. Insulation resistance 1000MΩ min. Rated voltage 100V Insertion force 5N max. per c...
New items
Flat Serial Cable Assembly 64 Way Male IDC to Free End

Flat Serial Cable Assembly 64 Way Male IDC to Free End

IDC Cable Strip - PC104 Range 1.27mm pitch cable equipped with a male PC104 connector allowing the signals to be carried from the bus The remaining end is free to be fitted via an IDC connecion Pitch 2.54 mm Length 25 cm Current rating 1A Contact resistance 10mΩ max. Operating temperature -65°C to +80°C 2.54mm Board to Board and Wire to Board - Samtec
New items
3M 3517/50 100

3M 3517/50 100

CBL RIBN 50COND 0.050 GRAY 100'
New items
3M 3609/26 100

3M 3609/26 100

CBL RIBN 26COND 0.025 WHITE 100'
New items
TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match PB Plug, 200.5mm

TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match PB Plug, 200.5mm

TE Connectivity Micro-MaTch IDC Ribbon Cable Assemblies, Male-on-Wire to Paddle Board A range of Micro-MaTch IDC ribbon cable assemblies for use in wire to board interconnections. These Micro-MaTch ribbon cable assembles are terminated with a Male-on-Wire Micro-MaTch connector on one end and a Paddle Board Micro-MaTch connector on the other. The Micro-MaTch range of connectors have a compact, space saving design with a 1.27mm pitch. The IDC contacts have a contact spring system that prevents fretting corrosion. A positioning spring on the female contact absorbs movement between the male and female contacts caused by vibration and thermal expansion. Prevention of movement on the contact spot enables a gas tight connection to be made which makes the contact spring system fretting resistant. The contacts are fully protected by red polyester housings. These Micro-MaTch IDC ribbon cable assemblies are available with 200 mm, 150 mm and 70 mm cable lengths. Features and Benefits Compact, space saving design Fully tin plated contacts Fretting corrosion resistant Gas tight connection Applications These Micro-MaTch IDC ribbon cable assemblies are suitable for use in a wide range of wire to board applications including: Production & material handling equipment Control units Robots & motors Central heating units Car radios Navigation systems Dashboard systems Base stations Set top boxes Audio equipment Centreline 1.27mm (staggered) PC board thickness 1.6mm nominal PC board hole diameter 0.8mm for solder connections Flat cable to use Pitch 1.27mm; 28awg (stranded 0.8mm 2 , or solid dia. 0.30mm) Material-Housing Red glass filled thermoplastic polyester; UL94V-0) rating Contacts Phosphor bronze, with tin over nickel plating Contact resistance 10mΩ max. Insulation resistance 1000MΩ min. Rated voltage 100V Insertion force 5N max. per contact Extraction...
New items
TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match MOW Plug, 150.5mm

TE Connectivity Micro-Match Ribbon Cable Assembly, Micro-Match MOW Plug to Micro-Match MOW Plug, 150.5mm

TE Connectivity Micro-MaTch Value-Line IDC Ribbon Cable Assemblies, Male-on-Wire to Male-on-Wire A range of Micro-MaTch Value-Line IDC ribbon cable assemblies for use in wire to board interconnections. These Micro-MaTch ribbon cable assembles are terminated with a Male-on-Wire Micro-MaTch connector on both ends. The Micro-MaTch range of connectors have a compact, space saving design with a 1.27mm pitch. The IDC contacts have a contact spring system that prevents fretting corrosion. A positioning spring on the female contact absorbs movement between the male and female contacts caused by vibration and thermal expansion. Prevention of movement on the contact spot enables a gas tight connection to be made which makes the contact spring system fretting resistant. These Micro-MaTch IDC ribbon cable assemblies are available with 150 mm and 70 mm cable lengths. Features and Benefits Compact, space saving design Fully tin plated contacts Fretting corrosion resistant Gas tight connection Applications The Micro-MaTch Value-Line of connectors is designed for use in less demanding environments than the standard Micro-MaTch connectors. Applications include the following: Home automation and alarm equipment Mobile GPS devices Lighting Air and climate control units CCTV Building surface control Set top boxes, audio & video equipment Electronic voting machines Pay terminals Centreline 1.27mm (staggered) PC board thickness 1.6mm nominal PC board hole diameter 0.8mm for solder connections Flat cable to use Pitch 1.27mm; 28awg (stranded 0.8mm 2 , or solid dia. 0.30mm) Material-Housing Red glass filled thermoplastic polyester; UL94V-0) rating Contacts Phosphor bronze, with tin over nickel plating Contact resistance 10mΩ max. Insulation resistance 1000MΩ min. Rated voltage 100V Insertion force 5N max. per contact Extraction force 1...
New items
HARTING 09180247005

HARTING 09180247005

CBL RIBN 24COND 0.050 MULTI 100'
New items
Amphenol 68 Way Unscreened Flat Ribbon Cable, 43.18 mm Width, Series Spectra-Strip, 30m

Amphenol 68 Way Unscreened Flat Ribbon Cable, 43.18 mm Width, Series Spectra-Strip, 30m

Spectra-Zip PVC .025" Center Cable Length 30 m Ribbon Cable Information Ribbon cables provide a simple, quick and cost-effective solution to mass termination. They also have space and weight saving advantages over other wiring methods and are ideal for use on computers, peripherals, and interface units, audio and digital equipment.
New items
TE Connectivity Flat Ribbon Cable, 51mm, Series FLEXSTRIP#

TE Connectivity Flat Ribbon Cable, 51mm, Series FLEXSTRIP#

Jumper Leads FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications. The product can be repeatably flexed without failure, reliable vibration- and break proof connection No long preparation times for connecting PCBs, no cutting into sections, no preliminary work Can be installed by most commonly used soldering techniques High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously Insulation Nomex: UL Style 5295 PTFE: UL Style 2928 Equivalent Conductor Size 0.203mm² Conductor Material Cu/acc. QQ-W-343 Insulation Resistance (gnd,sig,gnd) >1 GΩ Operating Temperature 125°C Soldering Temperature 250°C/4s Current Rating 3A Voltage Rating 300V Dielectric Strength 1500Vac Dimensions (mm) Pitch A 2.54 Length B 25.4, 50.8, 76.2 Margin max C 0.8 Margin min C 0.25 Max Thickness D 0.75 Mid Pin Thickness max F 0.37 Mid Pin Thickness min F 0.33 Pin Diameter max E 0.53 Pin Diameter min E 0.51 Min Bending Diameter - 3.18 Note These jumpers are suitable for use with the FLEXSTRIP® sockets range
New items
TE Connectivity Flat Ribbon Cable, Series FLEXSTRIP, 25.4mm

TE Connectivity Flat Ribbon Cable, Series FLEXSTRIP, 25.4mm

Jumper Leads FLEXSTRIP® jumpers are multi-conductor board- to -board interconnect devices. They provide a convenient, reliable alternative to conventional point to point wiring for high density, high vibration PCB interconnections. Two types are available: those made from Nomex material are suitable for standard applications where changes of direct resistance due to humidity are not critical; those made from PTFE are ideal for high electrical and mechanical performance applications. The product can be repeatably flexed without failure, reliable vibration- and break proof connection No long preparation times for connecting PCBs, no cutting into sections, no preliminary work Can be installed by most commonly used soldering techniques High processsing speed,e.g soldering all the wiring points in the soldering bath simultaneously Insulation Nomex: UL Style 5295 PTFE: UL Style 2928 Equivalent Conductor Size 0.203mm² Conductor Material Cu/acc. QQ-W-343 Insulation Resistance (gnd,sig,gnd) >1 GΩ Operating Temperature 125°C Soldering Temperature 250°C/4s Current Rating 3A Voltage Rating 300V Dielectric Strength 1500Vac Dimensions (mm) Pitch A 2.54 Length B 25.4, 50.8, 76.2 Margin max C 0.8 Margin min C 0.25 Max Thickness D 0.75 Mid Pin Thickness max F 0.37 Mid Pin Thickness min F 0.33 Pin Diameter max E 0.53 Pin Diameter min E 0.51 Min Bending Diameter - 3.18 Note These jumpers are suitable for use with the FLEXSTRIP® sockets range
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Ribbon & Flat Cable and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Ribbon & Flat Cable or any other product.
This depends on the Ribbon & Flat Cable individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Ribbon & Flat Cable and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Ribbon & Flat Cable.
Yes. We keep updating our stock frequently and if a product like Ribbon & Flat Cable is not in stock then we will let you know.