Rates
1+
£ 87.96
Products Found: 755
Showing Results For: Non Contact Safety Switches
Non Contact Safety Switches
FILTERS
Filters
Showing
1 -
New Items
New items
177293 RS2R-11-C3, Eaton
The Eaton Moeller series RS safety switch that has 3 m connection cable connection type and it suitable for safety functions, it has plastic enclosure material.
Shock resistance
Terminal capacity 22 AWG
New items
177294 RS2R-12-C3, Eaton
The Eaton Moeller series RS safety switch that has 3 m connection cable connection type and it suitable for safety functions, it has plastic enclosure material.
Shock resistance
Terminal capacity 22 AWG
New items
440N-Z21W1PA, Allen Bradley Guardmaster
MC2, Coded, IP69K Non-contact actuationMagnetic coded sensingHigh tolerance to misalignmentLED indication2 N/C solid state relay outputs and 1 PNP auxiliary outputSwitching current: 200 mA @ 24VdcSupply Voltage: 24VdcIP 69K protection ratingCategory 1 device per EN 954-1, dual channel contacts suitable for Cat 3 or 4 systems
New items
XCSDMP700L01M12, Telemecanique Sensors
XCS-DMC/XCS-DMP Coded Magnetic Switches, Rectangular
The Schneider XCS-DM coded magnetic safety switches are designed for monitoring the doors, covers and guards of industrial machines with imprecise guiding and low inertia. These safety switches are ideally suited for machines subjected to frequent washing or liquid spray. They protect the operator by immediately stopping any dangerous movement as soon as the distance between the switch and its magnet is greater than 8mm (5mm for XCS-DMC).
The Schneider XPS-DM safety modules are specifically designed for monitoring the coded magnetic safety switches. When the XCS-DM safety switch is used in conjunction with the XPS-DM safety relay they offer a certified safety solution for guard monitoring.
Coded magnetic safety switch
Actuation on 3 sides: face to face and face to side
8mm tolerance to misalignment (5mm for XCS-DMC)
LED versions have an LED in series with one N/C giving indication when guard is closed
Coded reed technology - switch cannot be totally defeated by a simple magnet
Rectangular plastic housing
Dimensions: compact: H51 x W16 x D7mm, standard: H88 x W25 x D13mm
Available pre-cabled or with connector on flying lead
IP66/67 protection in accordance with EN/IEC 60529
ROHS compliant
Safety module
Allows multi-switch monitoring to Safety Category 4 solutions in accordance with EN954-1/ISO 13849-1
XPS-DMB can monitor 2 independent sensors and modules, XPS-DME can monitor 6 independent sensors and modules
2 safety outputs and 2 solid state outputs for signalling to the process PLC
LEDs on the front face provide information on the monitoring circuit status
Dimensions: H99 x W22 x D114mm
IP20 protection on terminals and IP40 protection on enclosure, in accordance with EN/IEC 60529
Note
With the appropriate monitoring system and correctly wired these switches can reach safety category 4 con...
New items
XCSDMP5905, Telemecanique Sensors
Coded Magnetic Switch XCSDMP - 1 NC + 1 NO - Staggered - 5m
New items
RE11-SAC, Sick
SICK Magnetic Safety Switches
The RE1 and RE2 series from SICK are compact non-contact safety switches with a long service life thanks to the durable and low maintenance design. Just one of these safety switches, in conjunction with a suitable safety module, makes it possible to solve applications up to PL e and Cat. 4 (EN ISO 13849). These magnetic switches are easy to clean, making them suitable for contaminated areas or environments with strict hygiene standards. Flexi Loop now enables a safe series connection with enhanced diagnostics capabilities and minimal wiring effort.
Up to performance level PL e / Cat. 4 (EN ISO 13849)
Sensors with plug connector or connected cable
Flexi Loop-compatible M12 plug connector
High tolerances for door misalignment
Glass-fiber reinforced PPS rectangular housing
Both RE1 & RE2 are supplied with a switch and actuator offering significant cost saving
Spare actuators are also available separately
RE1
Response range of up to 7 mm
1 NO/1 NC or 2 NO contacts
RE2
1 NO/1 NC, 2 NO contacts or 3 NO contacts
Fast diagnostics via LED status indicator (RE27)
Note
The actuators are only coded in the sense that they have an identical magnetic combination making them type specific not individual example specific.
New items
440N-A02025, Allen Bradley Guardmaster
Ferrogard 6, 9 & 10 Slim Non Contact Safety Switch
The Ferrogard FRS 6, 9 and 10 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Moulded in ABS plastic with a slim rectangular housing to accommodate narrow mounting areas and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. They have two active sensing faces allowing more flexible mounting options.
Slim housings to accomodate narrow mounting areas
Two active sensing faces allowing more flexible mounting options
Operating distance for safety contacts: make 12mm; break 23mm
Operating temperature range: -10°C to +65°C
M4 mounting
IP67 rating (NEMA 6P)
Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems
Approvals
CE Marked for all applicable directives and cULus.
Standards
EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.
New items
506405, Pilz
PSENmag Non Contact Switches, Square
The PSENmag Non-contact Switch meets the highest safety requirements offers a complete solution that is safe and economical. It is approved up to PLe of EN ISO 13849-1, SIL 3 of EN/IEC 62061 and Category 4 of EN 954-1.
Features and Benefits
Connected via a plug connection or with cable
Flexible cable outlet, including connector, so there is no need for an angled connector
Flexible mounting, both the sensor and the actuator support every conceivable mounting configuration
Cost effective thanks to series connection
Operating distance of 3 mm or 10 mm
Extra signal contact and LED
Applications
The PSENmag safety switch is suitable for use in applications with heavy soiling, thanks to its non-contact design.
Note
Only stock nos.
744-8702
and
824-4918
have an LED.
Standards
EN954-1 (Cat 4), EN60204-1, EN60947-5-3.
Approvals
CE, cULus Listed, TÜV.
Supplied with
Actuator.
New items
540080, Pilz
PSENcode Large Actuator
The PSEN cs1.1 1 actuator is designed for use with the PSENcode large design non-contact safety switches.
Features and Benefits
Transponder technology
Large design
IP6K9K protection
Approvals
CE, cULus Listed, TÜV.
New items
542011, Pilz
PSENcode Slim Non-Contact Safety Switch, Coded
The PSEN cs5.11 and PSEN cs5.1p safety switches are coded and only switch when used with an actuator from the PSEN cs1.1 series. There is no restriction on the number of times the actuator can be used and reset.
Features and Benefits
Transponder technology for presence detection
Coded switch
Dual-channel operation
2 safety inputs for series connection of multiple safety switches
2 safety outputs
Safety Device Diagnostics (SDD)
Safety Device Diagnostics can be used to poll sensor information, to perform actions and to read configuration parameters
Diagnostic input for Y1 for Safety Device Diagnostics (SDD)
Signal output/diagnostic output Y32 for Safety Device Diagnostics
LED display for state of actuator detection, state of the inputs and supply voltage/fault
IP66 / IP67 protection
PSEN cs5.11 (stock no.
918-6667
)
1 actuation direction with 3 approach directions: square marking for normal operating distance
M12 8 pole male connector
30 N holding force
PSEN cs5.1p (stock no.
918-6661
)
4 actuation directions, each with 3 approach directions: square marking for normal operating distance and triangle marking for short operating distance
M8 8 pole male connector
Caution
The safety level PLe (Cat. 4)/SIL CL 3 is only achieved if the safety outputs use 2-channel processing.
Standards
EN 60947-5-3; EN 62061 SIL CL 3; EN ISO 13849-1 PLe Cat. 4; EN ISO 14119 Coding level Low, Type4.
Approvals
CE, TÜV, UL/cUL, FCC, IC, ECOLAB.
Supplied with
Actuator.
New items
440N-S32033, Allen Bradley Guardmaster
Allen-Bradley Sipha S2 Non-contact Safety Switch
The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit.
Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient
Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down
Non-contact actuation
Magnetic coded sensing
Slim moulded ABS housing, 82x19x19mm
Must be operated with its own safety control unit
Approvals
UL, CSA.
Standards
EN1088, EN292, EN60204-1.
Supplied with
Stock nos.
334-0777
&
335-5763
have a 3m cable attached, stock no.
873-2219
has a 10m cable attached.