Rates
1+
£ 53.22
Products Found: 130
Showing Results For: Industrial Surge Protection
Industrial Surge Protection
FILTERS
Filters
Showing
1 -
New Items
New items
278519 FAZ-XAA-C-110-415VAC, Eaton
Eaton FAZ Series Circuit Breakers
Features and Benefits
New items
OVR TC 200 VP, ABB
ABB OVR Series
These surge protection devices are recommended for locations having a high exposure to lightning, for example, light entrances to buildings protected by lightning rods or powered by aerial lines. These products are installed at the entrance of the installation (such as the main distribution board).
Simple DIN rail mounting
IP20 Protection
Operating temperature range: -40°C → +80°C
Industrial Circuit Protection
New items
TVS1HWA10X, Schneider Electric
HWA Surge Protective Devices
Range of suppressors and noise filters in compact size, this allows surge suppression to be installed adjacent to power panels or directly on sensitive equipment in harsh electrical conditions.
HWA SPDs provide high-quality surge suppression for a wide variety of commercial, industrial or institutional applications, and can be used in a network of surge suppression applications or as a stand-alone surge suppressor
Suppression status alarm
EMI/RFI noise rejection
LED status indication
Panel mount
Square D
For use with Qwikline I consumer units and can be retrofitted in to existing systems,Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used
New items
IC205, SolaHD
Sola - Islatrol IC+ Series
Professional range of Sola high frequency noise filters from the Islatrol IC+ series. Suitable applications include industrial or office equipment.
Transient protection in all modes
LED power indication
New items
FAZ-XAA-NA110-415VAC, Eaton
Eaton FAZ Series Circuit Breakers
The FAZ series by Eaton offers a wide range of quality, highly reliable and safe circuit breakers. The FAZ series is available with B, C, D and Z characteristics in accordance with UL 1077, CSA C22.2 No.235 and IEC 60947-2.
Rated currents up to 63A
Current limiting design
Reliable and safe operation
New items
IC405, SolaHD
Sola - Islatrol IC+ Series
Professional range of Sola high frequency noise filters from the Islatrol IC+ series. Suitable applications include industrial or office equipment.
Transient protection in all modes
LED power indication
New items
278519 & FAZ-XAA-C-110-415VAC, Eaton
Eaton FAZ Series Circuit Breakers
The FAZ series by Eaton offers a wide range of quality, highly reliable and safe circuit breakers. Eatons FAZ DIN rail mountable circuit breaker is designed for use in control panel applications.
Features and Benefits
The Eaton miniature circuit breaker has a current limiting design, providing short circuit interruption to reduce let-through energy, which can damage the circuit.
Rated currents up to 63A.
The toggle can be sealed in both the on and off position where required, and the trip-free design means that the breaker cannot be defeated by holding the handle in the on position.
Reliable and safe operation with six levels of thermal-magnetic over-current protection.
Red or green light indicates the contact position.
Easy installation.
Suitable for supplementary protection.
New items
TVS3HWA50X, Schneider Electric
HWA Surge Protective Devices
Range of suppressors and noise filters in compact size, this allows surge suppression to be installed adjacent to power panels or directly on sensitive equipment in harsh electrical conditions.
HWA SPDs provide high-quality surge suppression for a wide variety of commercial, industrial or institutional applications, and can be used in a network of surge suppression applications or as a stand-alone surge suppressor
Suppression status alarm
EMI/RFI noise rejection
LED status indication
Panel mount
Square D
For use with Qwikline I consumer units and can be retrofitted in to existing systems,Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used
New items
1SNA295395R2400, ABB
1 stud terminal M5 x 19.5 mm 0.768 in,
Equipment: 1 bottom nut + 2 washers + 1 spring washer + 1 top nut.
New items
1SNA295401R2300, ABB
1 stud terminal M5 x 19.5 mm 0.768 in,
Equipment: 1 bottom nut + 2 washers + 1 spring washer + 1 top nut.
New items
SG21NA300, Lovato
The Lovato SG2 series is surge protection device type 2 with plug in cartridge. This device have single pole with 1 neutral and rated discharge current 20kA per pole. This device used for the AC power line application and it have two numbers of din module
Operating temperature is -40 to 85°C
This surge protection device have din rail fixing
New items
SG23NA300, Lovato
The Lovato SG2 series is surge protection device type 2 with plug in cartridge. This device have three pole with neutral and rated discharge current 20kA per pole. This device used for the AC power line application and it have four number of din module.
Operating temperature is -40 to 85°C
This surge protection device have din rail fixing