Featured Products
Gold Plated Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006...
Gold Plated Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006...
Gold Plated Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006...
Yuetsu SMP Limited Detent Receptacles A series of 50 Ohm SMP connectors, with a gold plated body and gold plated phosphor bronze contacts.These...
Gold Plated Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006...
Pressmaster Support Tooling Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Too...
Yuetsu SMK to SMP In Series Adapters A range of 50 Ohm in series straight bodied RF adaptors. These SMK to...
Adaptors Adaptors to facilitate interconnections between common connectors
Pressmaster Support Tooling Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Too...
Popular Categories For Yuetsu
Categories For Yuetsu
Popular Items
Popular items
089-PE08D, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
Popular items
089-NV98B, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
Popular items
088-2060G, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
Popular items
511-PJ37B, Yuetsu
Yuetsu SMP Limited Detent Receptacles
A series of 50 Ohm SMP connectors, with a gold plated body and gold plated phosphor bronze contacts.These male SMP connectors are surface mount or edge mounting with limited detent. The connectors operate within a frequency range of 0-40GHz and are typically used for antennas broadband, military and instrumentation applications.
Yuetsu SMP Series
Popular items
088-6040G, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
Popular items
Popular items
CR-53-8242, Yuetsu
Pressmaster Support Tooling
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an emergency release mechanism.
Note
All Pressmaster tools are compatible with the RS and Weidmüller ferrules. For general information on the Pressmaster 'Original Line' and 'Komfort' tools see the Insulated Crimp Terminal Tooling earlier in this section.
Popular items
150-RB88B, Yuetsu
Yuetsu SMK to SMP In Series Adapters
A range of 50 Ohm in series straight bodied RF adaptors. These SMK to SMP RF adaptors all have gold plated beryllium copper contacts and operate within a frequency range of 0-40GHz.They are available in various orientations providing the user different options for cable coupling.
Part number
906-0770
SMK plug to SMP plug
Part number
906-0773
SMK plug to SMP jack
Part number
906-0777
SMK jack to SMP plug
Part number
906-0786
SMK jack to SMP jack
Yuetsu In Series Adaptors
Popular items
150-PL36A, Yuetsu
Adaptors
Adaptors to facilitate interconnections between common connectors
Popular items
Popular items
Popular items
CR-50-1113, Yuetsu
Pressmaster Support Tooling
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an emergency release mechanism.
Note
All Pressmaster tools are compatible with the RS and Weidmüller ferrules. For general information on the Pressmaster 'Original Line' and 'Komfort' tools see the Insulated Crimp Terminal Tooling earlier in this section.
New Items
New items
New items
CR-53-8242, Yuetsu
Pressmaster Support Tooling
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an emergency release mechanism.
Note
All Pressmaster tools are compatible with the RS and Weidmüller ferrules. For general information on the Pressmaster 'Original Line' and 'Komfort' tools see the Insulated Crimp Terminal Tooling earlier in this section.
New items
150-PL36A, Yuetsu
Adaptors
Adaptors to facilitate interconnections between common connectors
New items
New items
New items
150-RB88B, Yuetsu
Yuetsu SMK to SMP In Series Adapters
A range of 50 Ohm in series straight bodied RF adaptors. These SMK to SMP RF adaptors all have gold plated beryllium copper contacts and operate within a frequency range of 0-40GHz.They are available in various orientations providing the user different options for cable coupling.
Part number
906-0770
SMK plug to SMP plug
Part number
906-0773
SMK plug to SMP jack
Part number
906-0777
SMK jack to SMP plug
Part number
906-0786
SMK jack to SMP jack
Yuetsu In Series Adaptors
New items
089-PE08D, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
New items
089-NV98B, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
New items
088-2060G, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
New items
088-6040G, Yuetsu
Gold Plated
Connectors with stainless steel bodies and gold plating, which will mate with connectors conforming to MIL-C-39012 and BS 9210 N0006. Available for a variety of cable sizes, mounting configurations and cable and contact termination arrangements.
Good high frequency performance at high power ratings in small diameters
Connector variants suitable for semi-rigid or flexible cables
For use with most commonly used microwave cables
Captive contact versions ensure correct positioning when mating to other assemblies
Frequency range
DC to 18GHz (semi-rigid cable) Working voltage: 450Vdc or ac (peak)
DC to 12·4GHz (flexible braided cable) Proof voltage: 1500Vdc or ac (peak)
VSWR (f=freq. in GHz)
1·07+ 0·008(f) (semi-rigid cable)
1·20+ 0·03(f) (braided cable)
New items
511-PJ37B, Yuetsu
Yuetsu SMP Limited Detent Receptacles
A series of 50 Ohm SMP connectors, with a gold plated body and gold plated phosphor bronze contacts.These male SMP connectors are surface mount or edge mounting with limited detent. The connectors operate within a frequency range of 0-40GHz and are typically used for antennas broadband, military and instrumentation applications.
Yuetsu SMP Series
New items
CR-50-1113, Yuetsu
Pressmaster Support Tooling
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an emergency release mechanism.
Note
All Pressmaster tools are compatible with the RS and Weidmüller ferrules. For general information on the Pressmaster 'Original Line' and 'Komfort' tools see the Insulated Crimp Terminal Tooling earlier in this section.
Don’t hesitate to ask questions for better clarification.