Featured Products
Sprint Electric Enclosed Reversing DC Drive Range of premuim fully enclosed DC drives come equipped for either reversing or non-reversing applic...
The Sprint Electric single direction 2 quadrant analogue DC motor controller has been specifically designed at a cost and size to benefit OEMS, a...
The Sprint Electric 3200i series is DC motor controller for permanent magnet or shunt wound motors up to 4KW isolated 1Q up to 16A output and 2 p...
The Sprint Electric 3600XRi series is 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 7.5KW its isolated 4Q t...
Sprint Electric Fully Isolated DC Drive Adaptable range of slimline range of controllers suitable for use w...
Sprint Electric Fully Isolated DC Drive Adaptable range of slimline range of controllers suitable for use with both...
Sprint Electric Fully Isolated DC Drive Adaptable range of slimline range of controllers suitable for use with both...
Sprint Electric Non Isolated DC Drive Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wou...
Sprint Electric Fully Isolated DC Drive Adaptable range of slimline range of controllers suitable for use w...
Sprint Electric Non Isolated DC Drive Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wou...
Sprint Electric DC Motor Controller - XLV Range The XLV range of DC servo controllers are designed for use...
Sprint Electric Non Isolated DC Drive Adaptable range of slimline range of controllers suitable for use wit...
Popular Categories For Sprint Electric
Popular Items
Popular items
SLE34, Sprint Electric
The Sprint Electric single direction 2 quadrant analogue DC motor controller has been specifically designed at a cost and size to benefit OEMS, and yet without any compromise in specification, reliability or performance. Its compact footprint (250mm x 204mm) enables additional savings and ensures easy integration within new designs or trouble free installation when retrofitting.
Extremely compact size, saves panel space and makes for easy retrofitting
Extra 50% peak torque for rapid acceleration or shock loads
Isolated control electronics for easy connection to other drives/equipment
Configurable field bridge for easy motor field voltage matching
Wide AC supply range, 380 - 480V or 200-240V, user selectable
Torque control input for basic winding or tension control, with over speed limiting
Switch selectable feedback calibration - no component changes
Switch selectable Tach or Armature voltage feedback
Numerous alarms for enhanced drive and motor protection
Popular items
1220i, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
Popular items
1220iLV, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
Popular items
3200i/16, Sprint Electric
The Sprint Electric 3200i series is DC motor controller for permanent magnet or shunt wound motors up to 4KW isolated 1Q up to 16A output and 2 phase 240 – 415V input, up to 320VDC output voltage.
Compact design
Duel loop control
Precision techo rectifier
Popular items
3600XRi/32/LL, Sprint Electric
The Sprint Electric 3600XRi series is 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 7.5KW its isolated 4Q torque input up to 32A output and 2phase 240 – 415VAC input, up to 320VDC output voltage.
Four quadrant forward reverse and braking operation
Extremely compact size saves panel space and makes for easy retrofitting
Popular items
680LV, Sprint Electric
Sprint Electric Non Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. The compact design provides the user with a space saving solution to motor control
Non-Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Popular items
680XRiLV, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
Popular items
1200ER, Sprint Electric
Sprint Electric Enclosed Reversing DC Drive
Range of premuim fully enclosed DC drives come equipped for either reversing or non-reversing applications. Supplied with a comprehensive range of additional features to ensure your application is covered
Available in reversing and non-reversing options
Provides the user with mains on/off switching via rocker switch, zero speed interlocked reversing and graduated speed control via potentiometer
Reversing options are supplied with a dedicated toggle switch for direct control over the process
Dual voltage supply design with integral AC supply semiconductor fuse within the drive module
DC Drives - Brushless
Popular items
1220, Sprint Electric
Sprint Electric Non Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. The compact design provides the user with a space saving solution to motor control
Non-Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Popular items
340i, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
Popular items
POTKIT, Sprint Electric
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
XLV DC Servo Controller
Torque or speed control mode
Versions with 4, 8 and 12 amps available
Overload till 200% for one second
DIN rail mounting
External speed setting potentiometer available, stock no.
891-9019
Popular items
400XLV-24V, Sprint Electric
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
XLV DC Servo Controller
Torque or speed control mode
Versions with 4, 8 and 12 amps available
Overload till 200% for one second
DIN rail mounting
External speed setting potentiometer available, stock no.
891-9019
New Items
New items
SLE34, Sprint Electric
The Sprint Electric single direction 2 quadrant analogue DC motor controller has been specifically designed at a cost and size to benefit OEMS, and yet without any compromise in specification, reliability or performance. Its compact footprint (250mm x 204mm) enables additional savings and ensures easy integration within new designs or trouble free installation when retrofitting.
Extremely compact size, saves panel space and makes for easy retrofitting
Extra 50% peak torque for rapid acceleration or shock loads
Isolated control electronics for easy connection to other drives/equipment
Configurable field bridge for easy motor field voltage matching
Wide AC supply range, 380 - 480V or 200-240V, user selectable
Torque control input for basic winding or tension control, with over speed limiting
Switch selectable feedback calibration - no component changes
Switch selectable Tach or Armature voltage feedback
Numerous alarms for enhanced drive and motor protection
New items
1220i, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
New items
1220iLV, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
New items
3200i/16, Sprint Electric
The Sprint Electric 3200i series is DC motor controller for permanent magnet or shunt wound motors up to 4KW isolated 1Q up to 16A output and 2 phase 240 – 415V input, up to 320VDC output voltage.
Compact design
Duel loop control
Precision techo rectifier
New items
3600XRi/32/LL, Sprint Electric
The Sprint Electric 3600XRi series is 4 quadrant regenerative controller for permanent magnet or shunt wound motors up to 7.5KW its isolated 4Q torque input up to 32A output and 2phase 240 – 415VAC input, up to 320VDC output voltage.
Four quadrant forward reverse and braking operation
Extremely compact size saves panel space and makes for easy retrofitting
New items
680LV, Sprint Electric
Sprint Electric Non Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. The compact design provides the user with a space saving solution to motor control
Non-Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
New items
680XRiLV, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
New items
1200ER, Sprint Electric
Sprint Electric Enclosed Reversing DC Drive
Range of premuim fully enclosed DC drives come equipped for either reversing or non-reversing applications. Supplied with a comprehensive range of additional features to ensure your application is covered
Available in reversing and non-reversing options
Provides the user with mains on/off switching via rocker switch, zero speed interlocked reversing and graduated speed control via potentiometer
Reversing options are supplied with a dedicated toggle switch for direct control over the process
Dual voltage supply design with integral AC supply semiconductor fuse within the drive module
DC Drives - Brushless
New items
1220, Sprint Electric
Sprint Electric Non Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. The compact design provides the user with a space saving solution to motor control
Non-Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
New items
340i, Sprint Electric
Sprint Electric Fully Isolated DC Drive
Adaptable range of slimline range of controllers suitable for use with both permanent magnet and shunt wound DC motors. the compact design provides the user with a space saving solution to motor control
Fully Isolated DC Motor Controller
Compact design allows for adjacent installations to other panel components
Dual voltage supply compatible
Selectable AVF or tacho feedback facility
Simple installation & adjustment requirements thanks to easily accessible screw terminations
Fully isolated options come equipeed with comprehensive system I/O
Logic outputs for trip and overload
New items
POTKIT, Sprint Electric
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
XLV DC Servo Controller
Torque or speed control mode
Versions with 4, 8 and 12 amps available
Overload till 200% for one second
DIN rail mounting
External speed setting potentiometer available, stock no.
891-9019
New items
400XLV-24V, Sprint Electric
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
XLV DC Servo Controller
Torque or speed control mode
Versions with 4, 8 and 12 amps available
Overload till 200% for one second
DIN rail mounting
External speed setting potentiometer available, stock no.
891-9019
Don’t hesitate to ask questions for better clarification.