Featured Products
SparqEE Power Board The POWERv1.0 board converts an unregulated power supply to the +5V and +3.3V supply rails requ...
SparqEE Arduino Adapter Shield The ShieldAv1.0 is a shield or adapter that connects the SparqEE CELLv1.0 to...
SparqEE Raspberry Pi A/B Shield The SparqEE Raspberry Pi Shield connects the CELLv1.0 GSM Module to your Raspberry Pi (A or B). Plug the shield...
SparqEE GPS Receiver Board The SparqEE GPS receiver board features an RF antenna module (Antenova M10478) that has a SiRFstarIV 9333 GPS chipset...
Popular Categories For SparqEE
Popular Items
Popular items
Powerv1-0, SparqEE
SparqEE Power Board
The POWERv1.0 board converts an unregulated power supply to the +5V and +3.3V supply rails required by most embedded development systems.
LM1085 regulators
+5.0 to +25V input voltage (+4.75V input for 3.3V output, +6.5V input for 5V output)
+3.3V and +5V output voltages
Current maximum: 3A
Wire or header pin input
Dimensions: 26 x 42mm
Weight: 0.30oz
Operating temperature range: -40 to +85°C
Note
Please visit the following websites for further information:
SparqEE: http://sparqee.com/
Power: http://www.sparqee.com/products/sparqee-power
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/
Popular items
ShieldAv1-0, SparqEE
SparqEE Arduino Adapter Shield
The ShieldAv1.0 is a shield or adapter that connects the SparqEE CELLv1.0 to an Arduino processor board without any additional wiring. In addition, breakouts are provided for the four additional SparqEE boards (ACCELv1.0 (
811-0720
), GPSv1.0 (
811-0732
), POWERv1.0 (
811-0726
), RELAYv1.0 (
811-0739
)) if the user prefers to directly connect any of those boards to the shield
LEDs for CELLv1.0 status lin
Dimensions: 55 x 70mm
Weight: 0.70oz
Operating temperature range: -40 to +85°C
Note
Please visit the following websites for further information:
SparqEE: http://sparqee.com/
Arduino Shield: http://www.sparqee.com/products/sparqee-shielda
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/
Popular items
ShieldRv1-0, SparqEE
SparqEE Raspberry Pi A/B Shield
The SparqEE Raspberry Pi Shield connects the CELLv1.0 GSM Module to your Raspberry Pi (A or B). Plug the shield to the Pi GPIO header. Once plugged in, you are be able to add a wireless connection to the Pi. The shield can also connect to;
ACCELv1.0 (
811-0720
)
Featuring an on-board 3-axis accelerometer
GPSv1.0
(
811-0732
)
A Global Positioning System development board
POWERv1.0
(
811-0726
)
Converts an unregulated power supply to 5 V and 3.3 V
RELAYv1.0
(
811-0739
)
Provides a wide input range relay for driving high-current and high-voltage peripherals
Popular items
GPSv1-0, SparqEE
SparqEE GPS Receiver Board
The SparqEE GPS receiver board features an RF antenna module (Antenova M10478) that has a SiRFstarIV 9333 GPS chipset. You can use the board for applications such as navigation devices, portable media players, PDAs, Smart phones and tablets.
Features & Benefits of the SparqEE GPS Receiver Board
Supports any voltage I/O lines up to 6 V
Supply voltage range 2.5 V to 6 V
Dimensions: 23 x 40 mm
-40°C to +85°C operating temperature range
New Items
New items
Powerv1-0, SparqEE
SparqEE Power Board
The POWERv1.0 board converts an unregulated power supply to the +5V and +3.3V supply rails required by most embedded development systems.
LM1085 regulators
+5.0 to +25V input voltage (+4.75V input for 3.3V output, +6.5V input for 5V output)
+3.3V and +5V output voltages
Current maximum: 3A
Wire or header pin input
Dimensions: 26 x 42mm
Weight: 0.30oz
Operating temperature range: -40 to +85°C
Note
Please visit the following websites for further information:
SparqEE: http://sparqee.com/
Power: http://www.sparqee.com/products/sparqee-power
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/
New items
ShieldAv1-0, SparqEE
SparqEE Arduino Adapter Shield
The ShieldAv1.0 is a shield or adapter that connects the SparqEE CELLv1.0 to an Arduino processor board without any additional wiring. In addition, breakouts are provided for the four additional SparqEE boards (ACCELv1.0 (
811-0720
), GPSv1.0 (
811-0732
), POWERv1.0 (
811-0726
), RELAYv1.0 (
811-0739
)) if the user prefers to directly connect any of those boards to the shield
LEDs for CELLv1.0 status lin
Dimensions: 55 x 70mm
Weight: 0.70oz
Operating temperature range: -40 to +85°C
Note
Please visit the following websites for further information:
SparqEE: http://sparqee.com/
Arduino Shield: http://www.sparqee.com/products/sparqee-shielda
Forum: http://www.forum.sparqee.com/
Code/Drivers: http://www.sparqee.com/code-cell/
New items
ShieldRv1-0, SparqEE
SparqEE Raspberry Pi A/B Shield
The SparqEE Raspberry Pi Shield connects the CELLv1.0 GSM Module to your Raspberry Pi (A or B). Plug the shield to the Pi GPIO header. Once plugged in, you are be able to add a wireless connection to the Pi. The shield can also connect to;
ACCELv1.0 (
811-0720
)
Featuring an on-board 3-axis accelerometer
GPSv1.0
(
811-0732
)
A Global Positioning System development board
POWERv1.0
(
811-0726
)
Converts an unregulated power supply to 5 V and 3.3 V
RELAYv1.0
(
811-0739
)
Provides a wide input range relay for driving high-current and high-voltage peripherals
New items
GPSv1-0, SparqEE
SparqEE GPS Receiver Board
The SparqEE GPS receiver board features an RF antenna module (Antenova M10478) that has a SiRFstarIV 9333 GPS chipset. You can use the board for applications such as navigation devices, portable media players, PDAs, Smart phones and tablets.
Features & Benefits of the SparqEE GPS Receiver Board
Supports any voltage I/O lines up to 6 V
Supply voltage range 2.5 V to 6 V
Dimensions: 23 x 40 mm
-40°C to +85°C operating temperature range
Don’t hesitate to ask questions for better clarification.