Featured Products
PicoScope 3000 Series Oscilloscope PC MSO The PicoScope 3000 Series mixed signal oscilloscope (MSO) models have two...
PicoLog 1000 Series Multichannel Voltage Data Loggers Designed to meet the needs of a wide range of general...
The Pico Technology 6000E series MSO has a 8bit vertical resolution 500 MHz analog bandwidth complemented by a real-time sampling rate of 5 GS/s...
Pico 40A AC/DC Current Probe, D9 Connector The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC cur...
Pico 200/2000A AC/DC Current Probe, D9 Connector The TA301 is a high-bandwidth, high-current probe fitted with a D9...
Pico Shrouded 4mm to 4mm Leads, 1000V CAT III, 0.5m Black or Red The TA308 (RS 136-5317 ) is a black double insulat...
USB DrDAQ® 2011 Data Logging Kit - PP707 While the USB DrDAQ DrDAQ data logger unit (RS 749-1914 ) comes wi...
The PicoVNA E-Cal modules are SOLT (Short, Open, Load and Thru) devices with USB controlled selection switching and loading of appropriate and ex...
PicoScope 3000D Series Oscilloscopes The compact, USB-connected PicoScope 3000D is a complete portable test system - it plugs into a laptop to b...
PicoScope 3000D Series Mixed Signal Oscilloscope The compact, USB-connected PicoScope 3000D Series mixed si...
The Pico 8.5GHz vector network analysers mainly used to give straightforward, portable, accurate microwave measurements. The VNA is small sized,...
Pico Sprung Hook Probes, 1000 V CAT III, Black / Red These probes feature a shrouded 4 mm socket allowing connectio...
Popular Categories For Pico Technology
Categories For Pico Technology
Popular Items
Popular items
PicoScope 3207A, Pico Technology
PicoScope 3000 Series Oscilloscope PC MSO
The PicoScope 3000 Series mixed signal oscilloscope (MSO) models have two analog channels plus 16 digital inputs. With the 3000 Series MSO, users can view both digital and analog signals simultaneously. The digital inputs may be displayed individually or in arbitrary groups labelled with binary, decimal or hexadecimal values. A separate logic threshold from -5V to +5V can be defined for each 8-bit input port. The digital trigger is activated by any bit pattern combined with an optional transition on any input. Advanced logic triggers can be set on either the analog or digital channels, or on both to facilitate complex mixed-signal triggering. The Series 3000 MSO has a built-in arbitrary waveform generator (AWG), for generating waveforms of almost any shape. Users can create and edit waveforms for the AWG using the AWG editor, load them from a spreadsheet or import them from a previously-captured oscilloscope waveform.
High bandwidths and sampling rates, with huge buffer memory
Mixed-signal capability and built-in AWG
Connections: 2x BNC analog & 16 digital input channels; BNC AWG output; USB port
High performance and flexibility in use, at affordable price
Note
PicoScope computer oscilloscopes connect to the USB port on any standard Windows-based computer, making full use of the PC's processing capabilities, large screen and familiar graphical user interfaces.
Supplied with
Probes (2) in probe case, TA139 test clips (2 packs of 10), TA136 digital cable, USB 2.0 cable, user manuals
Pico PC Based Instruments
Popular items
PicoLog 1216, Pico Technology
PicoLog 1000 Series Multichannel Voltage Data Loggers
Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 series multichannel voltage data loggers include everything needed for immediate use with a full suite of software including the ready to go PicoLog data logging package, the PicoScope oscilloscope package and an software development kit for writing user programs
Unipolar analogue input channels
Independent software-configurable channels, ranges, scaling and control outputs
up to 4 software configurable digital output lines
3 sampling modes to meet most data logging needs:
REAL-TIME
continuous provides averaged, time-accurate readings with automatic measurements,
STREAMING
allows channel voltage readings to be logged continuously at 1 kS/s on any number of channels
BLOCK MODE
captures at the full 1 MS/s sample rate of the logger for the duration of the 8k sample buffer.
Up to 1 MS/s sample rate
USB connected and powered
Software and pin-compatible with Pico USB ADC-11
Works with Windows XP and Vista (32 and 64-bit)
Software development kit Includes Application Programming Interface (API) and examples for C/C++/C#, VB, LabVIEW VIs
Attribute
PicoLog 1216
PicoLog 1012
Input channels
16 channels
12 channels
Resolution (bits)
12 bits
10 bits
Sampling rate –streaming
1 kS/s per channel in PicoLog, 100 kS/s using API
Sampling rate - block mode
1 MS/s
Sample rate – real-time continuous
1 kS/s or greater
Buffer memory
8k samples shared by all channels
Input Type (single/differential)
Single-ended, unipolar
Voltage Ranges
0 - 2.5 V
Accuracy
0.5% @ 12 bits
1.0% @ 10 bits
Overload protection
±30 V
AC/DC coupling
DC coupling
Input Impedance
1MΩ fixed – buffered inputs
Digital Outputs
4 digital outputs
2 digital outputs
Output power for sensors
2.5 V @ 10 mA. Curr...
Popular items
TA519, Pico Technology
The PicoVNA E-Cal modules are SOLT (Short, Open, Load and Thru) devices with USB controlled selection switching and loading of appropriate and extensive characterisation data. The devices are temperature controlled and are supplied within a convenient carry and storage case along with a characterised and polarity marked port adapter to extend calibration flexibility to two female or to male and female test ports.
Features and benefits
Many users of a vector network analyser prefer an automated calibration solution. Automation brings speed, efficiency and simplification to the calibration process and in doing so, tends to promote more regular and reliable calibration. Automation can therefore improve overall calibration quality and even reduce uncertainties or errors.
Used with the PicoVNA 106 & 108 an E-Cal module achieves calibration automation to full published specification. You simply power the module, make a dual port connection of the E-Cal standard between the PicoVNA test ports, and then initiate the automated procedure from within the PicoVNA user interface. The devices are temperature controlled, but will be ready to go by the time connections are made and correctly torqued.
Applications
PicoVNA E-Cal calibration standards are for use with PicoVNA 106 & 108 vector network analysers. Like the VNA they are USB controlled by the PicoVNA 3 MS Windows user interface software. This SMA(m) male ports E-Cal unit can be used to automatically calibrate single or dual port VNA measurements for which female SMA, PC3.5 or K-type test ports are being used. This is known as a "non-insertable" test set-up. Pico also includes with the E-Cal module a fully characterised and polarity marked SMA(f-f) adapter. This can be used to extend full specification usage to an "Insertable" male and female test port set-up.
Supplied with/Kit contains:
Supplied in a convenient carry and storage case
What other Calibration Kits are available in this Pico range
Male and dual gend...
Popular items
PP707, Pico Technology
USB DrDAQ® 2011 Data Logging Kit - PP707
While the USB DrDAQ DrDAQ data logger unit (RS
749-1914
) comes with many built-in sensors, the USB DrDAQ Data Logging Kit PP707 (RS
749-1917
) contains additional sensors and probes to enable many other measurments to be taken, therefore allowing further experiments to take place immediately.
Channel
Range
Resolution
Accuracy
pH (BNC)
0 to 14 pH
0.02 pH
Sensor-calibration dependent
Redox/ORP (Oxidation/Reduction)
(BNC shared with pH)
±2 V @1012 Ω
1.2 mV
Sensor-calibration dependent
Resistance (screw terminal)
0 to 1 MΩ
250 Ω @ 10 k
5%
External sensors (3 x FCC68 4/4)
Measure 0 to 2.5V
(Also supply power to external sensors and
identify sensor type via ID resistor)
0.1 mV
1%
Oscilloscope spectrum analyser channel (BNC)
±1.25 V, ±2.5 V, ±5 V, ±10 V@1M Ω
8 bits
±3% (DC)
Sound waveform
±100
±0.2
Not calibrated
Sound level
55 to 100 dBA
1 dBA
5 dBA
Temperature
-10 to +70 °C (+14 to 158 °F)
0.1 °C @ 25 °C (32.2 °F @ 77°F)
2 °C @ 25 °C (35.6 °F @ 77°F)
Light
0 to 100
0.1
Not calibrated
20kHz Arbitrary Waveform generator
±1.5 V amplitude plus ±1.5 V offset
10-bit
3%
Digital I/O
4 channels 0 to 5V TTL compatible
NA
NA
Supplied with
USB DrDAQ data logger board
pH electrode
Dr DAQ 2metre temperature sensors
DrDAQ humidity sensor
Software CD
USB Installation Guide
3m sensor extension cable
Scope probe x1 / x10 switchable
USB2 cable, 1.8 metre, blue
Dr DAQ represents a breakthrough in data logging. Simply plug Dr DAQ into the parallel port of any PC, run the supplied software and you are ready to collect and display data. Everything required is supplied: Dr DAQ uses power from the PC so no batteries are required. Dr DAQ is an ideal tool for engineers or can be at the heart of hundreds of educational science experiments.
As well as the built-in sensors, Dr DA...
Popular items
TA309, Pico Technology
Pico Shrouded 4mm to 4mm Leads, 1000V CAT III, 0.5m Black or Red
The TA308 (RS
136-5317
) is a black double insulated 0.5 m lead with shrouded male 4 mm banana plugs at each end, suitable for test environments that require 1000 V CAT III rated equipment to be used.
The TA309 (RS
136-5318
) is a red double insulated 0.5 m lead with shrouded male 4 mm banana plugs at each end, suitable for test environments that require 1000 V CAT III rated equipment to be used.
Pico PC Based Instruments
Popular items
PicoVNA 108, Pico Technology
The Pico 8.5GHz vector network analysers mainly used to give straightforward, portable, accurate microwave measurements. The VNA is small sized, light weight and low cost so used in field service, installation test, embedded and classroom applications.
Professional and portable performance
Low cost
High speed
Popular items
TA090, Pico Technology
Pico Sprung Hook Probes, 1000 V CAT III, Black / Red
These probes feature a shrouded 4 mm socket allowing connection to a measurement instrument using a 4 mm "banana" plug test lead. The sprung hook opens up to 10 mm to hold items such as components, IC legs or small conductors.
Features
Length: 121 mm
Height: 23 mm
Hook Limit: 10 mm
IEC 1010 Rating: 1000 V CAT III 20 A
Colour: Black (RS
136-5326
); Red (RS
136-5327
)
Pico PC Based Instruments
Popular items
TA300, Pico Technology
Pico 40A AC/DC Current Probe, D9 Connector
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector.
Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once.
Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer.
PC Based Instruments
Compact and portable
Can provide a large and detailed colour display on your PC monitor
Simultaneous views of scope, spectrum analyser and meter modes
Analogue intensity and digital colour display modes
Signal storage is limited only by the PC's memory
Popular items
TA301, Pico Technology
Pico 200/2000A AC/DC Current Probe, D9 Connector
The TA301 is a high-bandwidth, high-current probe fitted with a D9 connector specifically designed to work with the PicoScope 4444 differential oscilloscope. The probe is automatically sensed by the PicoScope 4444 oscilloscope and features two current ranges: 200 A and 2000 A, AC or DC. The range is selected in the PicoScope 6 software, which also sets the probe range and vertical axis scaling.
Pico PC Based Instruments
Popular items
PicoScope 3403D, Pico Technology
PicoScope 3000D Series Oscilloscopes
The compact, USB-connected PicoScope 3000D is a complete portable test system - it plugs into a laptop to become an anywhere, anytime instrument of choice. It is supported by freely-downloadable PicoScope 6 software to offer advanced, cost-effective solutions in applications ranging from systems design, research and test to education, service and repair.
All models come with a USB 3.0 interface and are fully compatible with USB 2.0. In common with all PicoScopes, the 3000D displays waveforms in a re-sizable window on the user's PC screen, creating an uncluttered space for multiple high-resolution analog and digital traces. Saving, sharing and analysing waveforms is quick and simple using PC networking, storage and processing facilities. Deep measuring buffers enable long captures, even at fast real-time sampling rates of up to one gigasample per second. Hardware-accelerated data processing maintains smooth and rapid display updates, even with very large capture sizes.
A lot of advanced features are included as standard in the 3000D e.g. math channels, automatic measurements with statistics, spectrum analysis and colour persistence display mode. Also built-in are advanced digital triggering with pulse width, window, dropout, channel logic, digital pattern and other qualifiers, mask limit testing and alarms. Serial decoding supports SPI, I
2
C, I
2
S, RS-232/UART, CAN, LIN and FlexRay protocols on up to 20 analog and digital channels, even with a mixture of protocols at the same time.
Choice of bandwidths (50,70,100 or 200 MHz models)
2 or 4 analog channels, depending on choice of model
16 digital channels
Up to 1 GS/s real-time sampling
Up to 512 MS buffer memory
Built-in function generator and arbitrary waveform generator
Hardware-accelerated update rates
USB connected and powered
Supplied with
Switchable x1/x10 probes (1 per analog channel) in carrying case, Quick Start guide, software and reference CD, USB cables, power ...
Popular items
PicoScope 3203D MSO, Pico Technology
PicoScope 3000D Series Mixed Signal Oscilloscope
The compact, USB-connected PicoScope 3000D Series mixed signal oscilloscope is a complete portable test system - it plugs into a laptop to become an anywhere, anytime instrument of choice. It is supported by freely-downloadable PicoScope 6 software to offer advanced, cost-effective solutions in applications ranging from systems design, research and test to education, service and repair.
All models come with a USB 3.0 interface and are fully compatible with USB 2.0. In common with all PicoScopes, the 3000D MSO displays waveforms in a re-sizable window on the user's PC screen, creating an uncluttered space for multiple high-resolution analog and digital traces. Saving, sharing and analysing waveforms is quick and simple using PC networking, storage and processing facilities. Deep measuring buffers enable long captures, even at fast real-time sampling rates of up to one gigasample per second. Hardware-accelerated data processing maintains smooth and rapid display updates, even with very large capture sizes.
A lot of advanced features are included as standard in the 3000D MSO e.g. math channels, automatic measurements with statistics, spectrum analysis and colour persistence display mode. Also built-in are advanced digital triggering with pulse width, window, dropout, channel logic, digital pattern and other qualifiers, mask limit testing and alarms. Serial decoding supports SPI, I
2
C, I
2
S, RS-232/UART, CAN, LIN and FlexRay protocols on up to 20 analog and digital channels, even with a mixture of protocols at the same time.
Choice of bandwidths (50,70,100 or 200 MHz models)
2 or 4 analog channels, depending on choice of model
16 digital channels
Up to 1 GS/s real-time sampling
Up to 512 MS buffer memory
Built-in function generator and arbitrary waveform generator
Hardware-accelerated update rates
USB connected and powered
Supplied with
...
Popular items
PicoScope 6804E, Pico Technology
The Pico Technology 6000E series MSO has a 8bit vertical resolution 500 MHz analog bandwidth complemented by a real-time sampling rate of 5 GS/s oscilloscopes can display single-shot pulses with 200 ps time resolution. USB 3.0 interface and hardware acceleration ensure that the display is smooth and responsive even with long captures.
Input sensitivity: 2 mV/div to 4 V/div (10 vertical divisions)
DC gain accuracy: ±(1.5% of signal + 1 LSB)
Overvoltage protection: ±20 V peak max
New Items
New items
PicoScope 3207A, Pico Technology
PicoScope 3000 Series Oscilloscope PC MSO
The PicoScope 3000 Series mixed signal oscilloscope (MSO) models have two analog channels plus 16 digital inputs. With the 3000 Series MSO, users can view both digital and analog signals simultaneously. The digital inputs may be displayed individually or in arbitrary groups labelled with binary, decimal or hexadecimal values. A separate logic threshold from -5V to +5V can be defined for each 8-bit input port. The digital trigger is activated by any bit pattern combined with an optional transition on any input. Advanced logic triggers can be set on either the analog or digital channels, or on both to facilitate complex mixed-signal triggering. The Series 3000 MSO has a built-in arbitrary waveform generator (AWG), for generating waveforms of almost any shape. Users can create and edit waveforms for the AWG using the AWG editor, load them from a spreadsheet or import them from a previously-captured oscilloscope waveform.
High bandwidths and sampling rates, with huge buffer memory
Mixed-signal capability and built-in AWG
Connections: 2x BNC analog & 16 digital input channels; BNC AWG output; USB port
High performance and flexibility in use, at affordable price
Note
PicoScope computer oscilloscopes connect to the USB port on any standard Windows-based computer, making full use of the PC's processing capabilities, large screen and familiar graphical user interfaces.
Supplied with
Probes (2) in probe case, TA139 test clips (2 packs of 10), TA136 digital cable, USB 2.0 cable, user manuals
Pico PC Based Instruments
New items
PicoLog 1216, Pico Technology
PicoLog 1000 Series Multichannel Voltage Data Loggers
Designed to meet the needs of a wide range of general-purpose voltage, sensor and transducer logging applications, the PicoLog 1000 series multichannel voltage data loggers include everything needed for immediate use with a full suite of software including the ready to go PicoLog data logging package, the PicoScope oscilloscope package and an software development kit for writing user programs
Unipolar analogue input channels
Independent software-configurable channels, ranges, scaling and control outputs
up to 4 software configurable digital output lines
3 sampling modes to meet most data logging needs:
REAL-TIME
continuous provides averaged, time-accurate readings with automatic measurements,
STREAMING
allows channel voltage readings to be logged continuously at 1 kS/s on any number of channels
BLOCK MODE
captures at the full 1 MS/s sample rate of the logger for the duration of the 8k sample buffer.
Up to 1 MS/s sample rate
USB connected and powered
Software and pin-compatible with Pico USB ADC-11
Works with Windows XP and Vista (32 and 64-bit)
Software development kit Includes Application Programming Interface (API) and examples for C/C++/C#, VB, LabVIEW VIs
Attribute
PicoLog 1216
PicoLog 1012
Input channels
16 channels
12 channels
Resolution (bits)
12 bits
10 bits
Sampling rate –streaming
1 kS/s per channel in PicoLog, 100 kS/s using API
Sampling rate - block mode
1 MS/s
Sample rate – real-time continuous
1 kS/s or greater
Buffer memory
8k samples shared by all channels
Input Type (single/differential)
Single-ended, unipolar
Voltage Ranges
0 - 2.5 V
Accuracy
0.5% @ 12 bits
1.0% @ 10 bits
Overload protection
±30 V
AC/DC coupling
DC coupling
Input Impedance
1MΩ fixed – buffered inputs
Digital Outputs
4 digital outputs
2 digital outputs
Output power for sensors
2.5 V @ 10 mA. Curr...
New items
TA519, Pico Technology
The PicoVNA E-Cal modules are SOLT (Short, Open, Load and Thru) devices with USB controlled selection switching and loading of appropriate and extensive characterisation data. The devices are temperature controlled and are supplied within a convenient carry and storage case along with a characterised and polarity marked port adapter to extend calibration flexibility to two female or to male and female test ports.
Features and benefits
Many users of a vector network analyser prefer an automated calibration solution. Automation brings speed, efficiency and simplification to the calibration process and in doing so, tends to promote more regular and reliable calibration. Automation can therefore improve overall calibration quality and even reduce uncertainties or errors.
Used with the PicoVNA 106 & 108 an E-Cal module achieves calibration automation to full published specification. You simply power the module, make a dual port connection of the E-Cal standard between the PicoVNA test ports, and then initiate the automated procedure from within the PicoVNA user interface. The devices are temperature controlled, but will be ready to go by the time connections are made and correctly torqued.
Applications
PicoVNA E-Cal calibration standards are for use with PicoVNA 106 & 108 vector network analysers. Like the VNA they are USB controlled by the PicoVNA 3 MS Windows user interface software. This SMA(m) male ports E-Cal unit can be used to automatically calibrate single or dual port VNA measurements for which female SMA, PC3.5 or K-type test ports are being used. This is known as a "non-insertable" test set-up. Pico also includes with the E-Cal module a fully characterised and polarity marked SMA(f-f) adapter. This can be used to extend full specification usage to an "Insertable" male and female test port set-up.
Supplied with/Kit contains:
Supplied in a convenient carry and storage case
What other Calibration Kits are available in this Pico range
Male and dual gend...
New items
PP707, Pico Technology
USB DrDAQ® 2011 Data Logging Kit - PP707
While the USB DrDAQ DrDAQ data logger unit (RS
749-1914
) comes with many built-in sensors, the USB DrDAQ Data Logging Kit PP707 (RS
749-1917
) contains additional sensors and probes to enable many other measurments to be taken, therefore allowing further experiments to take place immediately.
Channel
Range
Resolution
Accuracy
pH (BNC)
0 to 14 pH
0.02 pH
Sensor-calibration dependent
Redox/ORP (Oxidation/Reduction)
(BNC shared with pH)
±2 V @1012 Ω
1.2 mV
Sensor-calibration dependent
Resistance (screw terminal)
0 to 1 MΩ
250 Ω @ 10 k
5%
External sensors (3 x FCC68 4/4)
Measure 0 to 2.5V
(Also supply power to external sensors and
identify sensor type via ID resistor)
0.1 mV
1%
Oscilloscope spectrum analyser channel (BNC)
±1.25 V, ±2.5 V, ±5 V, ±10 V@1M Ω
8 bits
±3% (DC)
Sound waveform
±100
±0.2
Not calibrated
Sound level
55 to 100 dBA
1 dBA
5 dBA
Temperature
-10 to +70 °C (+14 to 158 °F)
0.1 °C @ 25 °C (32.2 °F @ 77°F)
2 °C @ 25 °C (35.6 °F @ 77°F)
Light
0 to 100
0.1
Not calibrated
20kHz Arbitrary Waveform generator
±1.5 V amplitude plus ±1.5 V offset
10-bit
3%
Digital I/O
4 channels 0 to 5V TTL compatible
NA
NA
Supplied with
USB DrDAQ data logger board
pH electrode
Dr DAQ 2metre temperature sensors
DrDAQ humidity sensor
Software CD
USB Installation Guide
3m sensor extension cable
Scope probe x1 / x10 switchable
USB2 cable, 1.8 metre, blue
Dr DAQ represents a breakthrough in data logging. Simply plug Dr DAQ into the parallel port of any PC, run the supplied software and you are ready to collect and display data. Everything required is supplied: Dr DAQ uses power from the PC so no batteries are required. Dr DAQ is an ideal tool for engineers or can be at the heart of hundreds of educational science experiments.
As well as the built-in sensors, Dr DA...
New items
TA309, Pico Technology
Pico Shrouded 4mm to 4mm Leads, 1000V CAT III, 0.5m Black or Red
The TA308 (RS
136-5317
) is a black double insulated 0.5 m lead with shrouded male 4 mm banana plugs at each end, suitable for test environments that require 1000 V CAT III rated equipment to be used.
The TA309 (RS
136-5318
) is a red double insulated 0.5 m lead with shrouded male 4 mm banana plugs at each end, suitable for test environments that require 1000 V CAT III rated equipment to be used.
Pico PC Based Instruments
New items
PicoVNA 108, Pico Technology
The Pico 8.5GHz vector network analysers mainly used to give straightforward, portable, accurate microwave measurements. The VNA is small sized, light weight and low cost so used in field service, installation test, embedded and classroom applications.
Professional and portable performance
Low cost
High speed
New items
TA090, Pico Technology
Pico Sprung Hook Probes, 1000 V CAT III, Black / Red
These probes feature a shrouded 4 mm socket allowing connection to a measurement instrument using a 4 mm "banana" plug test lead. The sprung hook opens up to 10 mm to hold items such as components, IC legs or small conductors.
Features
Length: 121 mm
Height: 23 mm
Hook Limit: 10 mm
IEC 1010 Rating: 1000 V CAT III 20 A
Colour: Black (RS
136-5326
); Red (RS
136-5327
)
Pico PC Based Instruments
New items
TA300, Pico Technology
Pico 40A AC/DC Current Probe, D9 Connector
The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector.
Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once.
Being several instruments in one small unit, PC-based oscilloscopes are lighter and more portable than traditional test equipment. A field engineer can thereby carry a complete electronics lab loaded onto a notebook computer.
PC Based Instruments
Compact and portable
Can provide a large and detailed colour display on your PC monitor
Simultaneous views of scope, spectrum analyser and meter modes
Analogue intensity and digital colour display modes
Signal storage is limited only by the PC's memory
New items
TA301, Pico Technology
Pico 200/2000A AC/DC Current Probe, D9 Connector
The TA301 is a high-bandwidth, high-current probe fitted with a D9 connector specifically designed to work with the PicoScope 4444 differential oscilloscope. The probe is automatically sensed by the PicoScope 4444 oscilloscope and features two current ranges: 200 A and 2000 A, AC or DC. The range is selected in the PicoScope 6 software, which also sets the probe range and vertical axis scaling.
Pico PC Based Instruments
New items
PicoScope 3403D, Pico Technology
PicoScope 3000D Series Oscilloscopes
The compact, USB-connected PicoScope 3000D is a complete portable test system - it plugs into a laptop to become an anywhere, anytime instrument of choice. It is supported by freely-downloadable PicoScope 6 software to offer advanced, cost-effective solutions in applications ranging from systems design, research and test to education, service and repair.
All models come with a USB 3.0 interface and are fully compatible with USB 2.0. In common with all PicoScopes, the 3000D displays waveforms in a re-sizable window on the user's PC screen, creating an uncluttered space for multiple high-resolution analog and digital traces. Saving, sharing and analysing waveforms is quick and simple using PC networking, storage and processing facilities. Deep measuring buffers enable long captures, even at fast real-time sampling rates of up to one gigasample per second. Hardware-accelerated data processing maintains smooth and rapid display updates, even with very large capture sizes.
A lot of advanced features are included as standard in the 3000D e.g. math channels, automatic measurements with statistics, spectrum analysis and colour persistence display mode. Also built-in are advanced digital triggering with pulse width, window, dropout, channel logic, digital pattern and other qualifiers, mask limit testing and alarms. Serial decoding supports SPI, I
2
C, I
2
S, RS-232/UART, CAN, LIN and FlexRay protocols on up to 20 analog and digital channels, even with a mixture of protocols at the same time.
Choice of bandwidths (50,70,100 or 200 MHz models)
2 or 4 analog channels, depending on choice of model
16 digital channels
Up to 1 GS/s real-time sampling
Up to 512 MS buffer memory
Built-in function generator and arbitrary waveform generator
Hardware-accelerated update rates
USB connected and powered
Supplied with
Switchable x1/x10 probes (1 per analog channel) in carrying case, Quick Start guide, software and reference CD, USB cables, power ...
New items
PicoScope 3203D MSO, Pico Technology
PicoScope 3000D Series Mixed Signal Oscilloscope
The compact, USB-connected PicoScope 3000D Series mixed signal oscilloscope is a complete portable test system - it plugs into a laptop to become an anywhere, anytime instrument of choice. It is supported by freely-downloadable PicoScope 6 software to offer advanced, cost-effective solutions in applications ranging from systems design, research and test to education, service and repair.
All models come with a USB 3.0 interface and are fully compatible with USB 2.0. In common with all PicoScopes, the 3000D MSO displays waveforms in a re-sizable window on the user's PC screen, creating an uncluttered space for multiple high-resolution analog and digital traces. Saving, sharing and analysing waveforms is quick and simple using PC networking, storage and processing facilities. Deep measuring buffers enable long captures, even at fast real-time sampling rates of up to one gigasample per second. Hardware-accelerated data processing maintains smooth and rapid display updates, even with very large capture sizes.
A lot of advanced features are included as standard in the 3000D MSO e.g. math channels, automatic measurements with statistics, spectrum analysis and colour persistence display mode. Also built-in are advanced digital triggering with pulse width, window, dropout, channel logic, digital pattern and other qualifiers, mask limit testing and alarms. Serial decoding supports SPI, I
2
C, I
2
S, RS-232/UART, CAN, LIN and FlexRay protocols on up to 20 analog and digital channels, even with a mixture of protocols at the same time.
Choice of bandwidths (50,70,100 or 200 MHz models)
2 or 4 analog channels, depending on choice of model
16 digital channels
Up to 1 GS/s real-time sampling
Up to 512 MS buffer memory
Built-in function generator and arbitrary waveform generator
Hardware-accelerated update rates
USB connected and powered
Supplied with
...
New items
PicoScope 6804E, Pico Technology
The Pico Technology 6000E series MSO has a 8bit vertical resolution 500 MHz analog bandwidth complemented by a real-time sampling rate of 5 GS/s oscilloscopes can display single-shot pulses with 200 ps time resolution. USB 3.0 interface and hardware acceleration ensure that the display is smooth and responsive even with long captures.
Input sensitivity: 2 mV/div to 4 V/div (10 vertical divisions)
DC gain accuracy: ±(1.5% of signal + 1 LSB)
Overvoltage protection: ±20 V peak max
Don’t hesitate to ask questions for better clarification.