Featured Products
Rapid Cure Epoxy Adhesive, 5 Minute ® Fast curing clear epoxy adhesive 4 minute pot life 93°C maximum opera...
Liquid Silicone Release Agent Silicone release agent prevents Devcons products from sticking to patterns or moulds...
Wear Resistant Liquid Ceramic filled epoxy liquid for castings where exceptional durability is required Low frictio...
Filled Epoxy Wear Resistant Putty Repairs pumps, valves, flanges and seals Prevents abrasion and erosion of metals Maximum operating temp 121°C P...
General Purpose, Methacrylate, Structural Adhesive, Devweld 530 Rapid curing structural adhesive that produces high strength load bearing bonds...
Plastic Steel® Liquid Fast curing and self levelling compound Reproduces fine details with an excellent sur...
Flexane® Putty For a broad range of lining and protection applications Easily trowelled Cures to a medium hard rubber Bonds to most substrates M...
Rapid Cure Epoxy Adhesive, 5 Minute ® Fast curing clear epoxy adhesive 4 minute pot life 93°C maximum operating tem...
Flexane® Liquid Urethanes A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and for...
Aluminium Liquid Aluminium filled pourable epoxy liquid Cost effective moulds, patterns and fixings Excellent non shrink behaviour Reproduces fi...
RS PRO Brushable Ceramic-Filled Epoxy Features and Benefits: Typical Applications: FAQs What is Epoxy Adhesive used for? RS PRO
RS Pro Epoxy Putty Adhesive Features and benefits Applications –
Popular Categories For ITW Devcon
Popular Items
Popular items
19600, ITW Devcon
Liquid Silicone Release Agent
Silicone release agent prevents Devcons products from sticking to patterns or moulds
Ensures a high gloss finish on cast Devcon resin surfaces
For use only on solid or sealed surfaces. If the master is plaster, wood or other porous material, seal it before applying Devcon Release Agent
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
Popular items
14270, ITW Devcon
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Popular items
11211, ITW Devcon
Wear Resistant Liquid
Ceramic filled epoxy liquid for castings where exceptional durability is required
Low friction with outstanding wear resistance
Non shrink for accurate reproduction of critical details
Dry Service Temperature (Max °C) 121°C
Pot Life 60mins
Mix ratio (by Weight):9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
Popular items
RS_691-151, ITW Devcon
Filled Epoxy Wear Resistant Putty
Repairs pumps, valves, flanges and seals
Prevents abrasion and erosion of metals
Maximum operating temp 121°C
Pot life 60min
Mix ratio 9:1
Cure time with respect to +22°C
Popular items
20500, ITW Devcon
General Purpose, Methacrylate, Structural Adhesive, Devweld 530
Rapid curing structural adhesive that produces high strength load bearing bonds
Minimal surface preparation
Excellent shear, peel and impact resistant strength
Resistant to weathering, moisture and wide variations in temperature
Substrates - Engineered plastics, metaceramics and many other materials
Working Time 4-6 mins, Fixture Time 12-15mins
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Popular items
10211, ITW Devcon
Plastic Steel® Liquid
Fast curing and self levelling compound
Reproduces fine details with an excellent surface finish
Machinable to fine tolerances
Dry Service Temperature (Max °C) 121°C
Pot Life 45mins
Mix ratio (by Weight): 9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
Popular items
15821, ITW Devcon
Flexane® Putty
For a broad range of lining and protection applications
Easily trowelled
Cures to a medium hard rubber
Bonds to most substrates
Maximum operating temp 82°C dry and 49°C wet
Pot life 25mins
Mix ratio 2.52:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
Popular items
14272, ITW Devcon
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Popular items
15250, ITW Devcon
Flexane® Liquid Urethanes
A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads.
Available in three grades to cover a variety of applications with different flexibility requirements
Good abrasion and wear resistance
Self levelling
Can be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.
Flexane 60 High flexibility
Flexane 80 Medium flexibility
Flexane 94 Low flexibility
Flexane
Hardness (shore)
Pot Life
Mix Ratio (by Weight)
60
65
30min
1.67:1
80
87
30min
3.33:1
94
97
10min
2.19:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
Popular items
RS_691-145, ITW Devcon
RS PRO Brushable Ceramic-Filled Epoxy
Features and Benefits:
Typical Applications:
FAQs
What is Epoxy Adhesive used for?
RS PRO
Popular items
RS_691-230, ITW Devcon
RS Pro Epoxy Putty Adhesive
Features and benefits
Applications –
Popular items
10711, ITW Devcon
Aluminium Liquid
Aluminium filled pourable epoxy liquid
Cost effective moulds, patterns and fixings
Excellent non shrink behaviour
Reproduces fine details
Dry Service Temperature (Max °C) 121°C
Pot Life 75mins
Mix ratio (by Weight):9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New Items
New items
14270, ITW Devcon
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
New items
19600, ITW Devcon
Liquid Silicone Release Agent
Silicone release agent prevents Devcons products from sticking to patterns or moulds
Ensures a high gloss finish on cast Devcon resin surfaces
For use only on solid or sealed surfaces. If the master is plaster, wood or other porous material, seal it before applying Devcon Release Agent
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
11211, ITW Devcon
Wear Resistant Liquid
Ceramic filled epoxy liquid for castings where exceptional durability is required
Low friction with outstanding wear resistance
Non shrink for accurate reproduction of critical details
Dry Service Temperature (Max °C) 121°C
Pot Life 60mins
Mix ratio (by Weight):9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
RS_691-151, ITW Devcon
Filled Epoxy Wear Resistant Putty
Repairs pumps, valves, flanges and seals
Prevents abrasion and erosion of metals
Maximum operating temp 121°C
Pot life 60min
Mix ratio 9:1
Cure time with respect to +22°C
New items
20500, ITW Devcon
General Purpose, Methacrylate, Structural Adhesive, Devweld 530
Rapid curing structural adhesive that produces high strength load bearing bonds
Minimal surface preparation
Excellent shear, peel and impact resistant strength
Resistant to weathering, moisture and wide variations in temperature
Substrates - Engineered plastics, metaceramics and many other materials
Working Time 4-6 mins, Fixture Time 12-15mins
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
New items
10211, ITW Devcon
Plastic Steel® Liquid
Fast curing and self levelling compound
Reproduces fine details with an excellent surface finish
Machinable to fine tolerances
Dry Service Temperature (Max °C) 121°C
Pot Life 45mins
Mix ratio (by Weight): 9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
15821, ITW Devcon
Flexane® Putty
For a broad range of lining and protection applications
Easily trowelled
Cures to a medium hard rubber
Bonds to most substrates
Maximum operating temp 82°C dry and 49°C wet
Pot life 25mins
Mix ratio 2.52:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
14272, ITW Devcon
Rapid Cure Epoxy Adhesive, 5 Minute ®
Fast curing clear epoxy adhesive
4 minute pot life
93°C maximum operating temperature
Works down to -40°C when cured
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
New items
15250, ITW Devcon
Flexane® Liquid Urethanes
A tough pourable rubber compound for part encapsulation, rugged flexible moulds and patterns, holding fixtures and forming die pads.
Available in three grades to cover a variety of applications with different flexibility requirements
Good abrasion and wear resistance
Self levelling
Can be used for part encapsulation, moulds and patterns, equipment linings, holding fixtures and forming die pads.
Flexane 60 High flexibility
Flexane 80 Medium flexibility
Flexane 94 Low flexibility
Flexane
Hardness (shore)
Pot Life
Mix Ratio (by Weight)
60
65
30min
1.67:1
80
87
30min
3.33:1
94
97
10min
2.19:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
10711, ITW Devcon
Aluminium Liquid
Aluminium filled pourable epoxy liquid
Cost effective moulds, patterns and fixings
Excellent non shrink behaviour
Reproduces fine details
Dry Service Temperature (Max °C) 121°C
Pot Life 75mins
Mix ratio (by Weight):9:1
Filled Epoxies
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals.
New items
RS_691-145, ITW Devcon
RS PRO Brushable Ceramic-Filled Epoxy
Features and Benefits:
Typical Applications:
FAQs
What is Epoxy Adhesive used for?
RS PRO
New items
RS_691-230, ITW Devcon
RS Pro Epoxy Putty Adhesive
Features and benefits
Applications –
Don’t hesitate to ask questions for better clarification.