Featured Products
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequenc...
The IQRF adaptor is used to connect IQRF transceiver via UART or SPI. Optimized combinations of IQRF devices Ready-to-use SW examples fitting to...
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency...
The IQRF IoT starter set is designed to plug-and-play learn how to build up IoT applications. Wireless nodes with sensors and actuators are creat...
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequenc...
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency...
The IQRF basic development set is used for development of IQRF applications fully programmed in C language. It contains hardware and development...
Popular Categories For IQRF
Popular Items
Popular items
TR-76DA, IQRF
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional on-board antenna requires no external components. SMT mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications.
PCB Antenna
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
Battery monitoring
18 pins, 11 I/O pins, 1 input only pin
A/D converter (4 channels), D/A converter, analog comparator
Popular items
IQRF-BB-01, IQRF
The IQRF adaptor is used to connect IQRF transceiver via UART or SPI.
Optimized combinations of IQRF devices
Ready-to-use SW examples fitting to typical tasks
Documentation, demo SW and support included
Affordable prices and favorable training
Popular items
TR-72DAT, IQRF
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional on-board antenna requires no external components. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time.
PCB Antenna
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
+3V LDO regulator output, battery monitoring
2 LEDs
8 pins, 6 I/Os
A/D converter (2 channels), analog comparator
Popular items
DS-IOT-01, IQRF
The IQRF IoT starter set is designed to plug-and-play learn how to build up IoT applications. Wireless nodes with sensors and actuators are created from included DDC kits. A gateway is created from a Linux microcomputer (with an interface compatible with Raspberry Pi) by connection a TR transceiver via the KON-RASP-01 adapter. It is used for Linux single-board computers.
Connectable to Linux single-board computers
4-device network
Raspberry Pi not included in the set
IQRF DPA interoperable product
Supported by IQRF GW Daemon and IQRF SDK
Popular items
TR-76D, IQRF
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional on-board antenna requires no external components. SMT mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications.
Soldering pad-hole (no antenna, no U.FL connector)
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
Battery monitoring
18 pins, 11 I/O pins, 1 input only pin
A/D converter (4 channels), D/A converter, analog comparator
Popular items
TR-72DCT, IQRF
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional on-board antenna requires no external components. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time.
U.FL connector (mini-coax)
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
+3V LDO regulator output, battery monitoring
2 LEDs
8 pins, 6 I/Os
A/D converter (2 channels), analog comparator
Popular items
DS-START-04, IQRF
The IQRF basic development set is used for development of IQRF applications fully programmed in C language. It contains hardware and development software with demo source examples and documentation needed to start with IQRF.
Suitable for point-to-point or for a small 3-device network
New Items
New items
TR-76DA, IQRF
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional on-board antenna requires no external components. SMT mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications.
PCB Antenna
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
Battery monitoring
18 pins, 11 I/O pins, 1 input only pin
A/D converter (4 channels), D/A converter, analog comparator
New items
IQRF-BB-01, IQRF
The IQRF adaptor is used to connect IQRF transceiver via UART or SPI.
Optimized combinations of IQRF devices
Ready-to-use SW examples fitting to typical tasks
Documentation, demo SW and support included
Affordable prices and favorable training
New items
TR-72DAT, IQRF
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional on-board antenna requires no external components. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time.
PCB Antenna
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
+3V LDO regulator output, battery monitoring
2 LEDs
8 pins, 6 I/Os
A/D converter (2 channels), analog comparator
New items
DS-IOT-01, IQRF
The IQRF IoT starter set is designed to plug-and-play learn how to build up IoT applications. Wireless nodes with sensors and actuators are created from included DDC kits. A gateway is created from a Linux microcomputer (with an interface compatible with Raspberry Pi) by connection a TR transceiver via the KON-RASP-01 adapter. It is used for Linux single-board computers.
Connectable to Linux single-board computers
4-device network
Raspberry Pi not included in the set
IQRF DPA interoperable product
Supported by IQRF GW Daemon and IQRF SDK
New items
TR-76D, IQRF
The IQRF TR-76D series IQRF transceiver modules operating in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and optional on-board antenna requires no external components. SMT mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications.
Soldering pad-hole (no antenna, no U.FL connector)
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
Battery monitoring
18 pins, 11 I/O pins, 1 input only pin
A/D converter (4 channels), D/A converter, analog comparator
New items
TR-72DCT, IQRF
The IQRF TR-72D series IQRF transceiver module operates in the 868 MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band. Its highly integrated ready-to-use design containing MCU, RF circuitry, integrated LDO regulator, serial EEPROM, optional temperature sensor and optional on-board antenna requires no external components. Extended RF power results in higher RF range. Ultra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time.
U.FL connector (mini-coax)
Operating system (upgradeable at the user), easy to use
DPA framework for Data controlled approach (formerly DCTR)
GFSK modulation
Selectable RF band 868 / 916 MHz, multiple channel
RF output power 10 mW
MCU with extended resources, user interrupt capability
Extra low power consumption, power management modes
SPI interface supported by OS in background
Serial EEPROM 256 Kb
PWM output
Programmable HW timer
+3V LDO regulator output, battery monitoring
2 LEDs
8 pins, 6 I/Os
A/D converter (2 channels), analog comparator
New items
DS-START-04, IQRF
The IQRF basic development set is used for development of IQRF applications fully programmed in C language. It contains hardware and development software with demo source examples and documentation needed to start with IQRF.
Suitable for point-to-point or for a small 3-device network
Don’t hesitate to ask questions for better clarification.