Crimp tool
Crimp tool for BNC, TNC, SMA, SMB, SMC and UHF series coaxial connectors.
A full range of grips for crimping different families of coaxial connectors onto RG and KX cables.
Technical specifications
125-0509
and
124-9896
:
crimping the central contacts and the ferrule on BNC and TNC connectors
124-9903
:
crimping the central contacts and the ferrule on BNC, TNC and UHF connectors
124-9919
:
crimping the ferrule on BNC, TNC, SMA, SMB, SMC and DIN coaxial connectors.
124-9931
:
crimping the ferrule on BNC, TNC, SMA, SMB, SMC and DIN coaxial connectors.
General Support Tooling
The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.
Crimp Tool Selection Guide
Tool Stock no
BNC
TNC
N
1.6 / 5.6
SMA
SMB
UHF
Mini UHF
Die Set Apertures (mm)
Typical Cable Types
298-1080
●
●
!
6.48, 5.41, 1.69
RG58, 59, 62, 71
298-1080
●
●
●
4.52, 3.25, 1.69
RG174, RG179
447-459
●
4.52, 1.69
MIN RG59, 179
456-431
●
●
5.38 to 5.43,
RG58, URM43, URM76
456-447
●
●
6.45 to 6.50,
RG59, RG62
473-0648
●
●
●
●
●
6.45 to 6.50, 1.68 to 1.71
RG59, URM70
456-778
●
●
●
●
6.48, 5.40, 1.70
n/a
241-8380
●
●
10.9, 5.41, 2.54, 1.69
RG58, 213, 214
Note:
Where a ! is shown in this first table with resp...
Don’t hesitate to ask questions for better clarification.