Enerpac Profile
Enerpac, one of the leading manufacturers and distributors of the world, founded in Menomonee Falls, Wisconsin, United States, in 1959; however, the company's history jumps back to 1910 when the original company produced water pumps for Ford’s legendary “Model T” car. The reputation of the firm as a technology leader was initiated in 1920 when the very first hydraulic jack was launched. By the late 1950s, an industrial product division was made, and the brand name Enerpac came along with it. Over the past decades, the company has developed an incomparable variety of hydraulic tools for thousands of applications in almost every working field or industry. Over time, the corporation has developed and implemented a wide collection of products, including torque & tension tools, pressers, cutters, pullers, heavy lifting technology, work holding tools, Biach Nuclear Tools, Sweeney aerospace tools, and simplex tools. These products are created in 8 manufacturing facilities on different locations of the world and are distributed by 1400 distributing partners to most regions worldwide.
Featured Products
High Pressure Hose Themo plastic hydraulic hoses for use in demanding environments and applications. The ho...
Single-Acting, General Purpose Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design...
Single-Acting, General Purpose Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design...
Needle Valve For use with high pressure hydraulic equipment to control cylinder speed Can also be used as a...
Elbow Adaptor 3/8in-18 NPT F-M elbow adaptor fitting Hose Fittings & Accessories...
Single-Acting, General Purpose Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden R...
Hydraulic Single-Acting, Low-Height Cylinder-Pump Set Enerpacs SCL range bring together a two speed hydrau...
Power Box Cylinder & Pumpsets Enerpac power box sets give you a complete hydraulic solution in one package. Each pa...
Hydraulic Wedge Cylinder Single acting, spring return For use when positioning and lifting heavy loads in confined...
Lightweight Hand Pump Durable glass-filled nylon reservoir and nylon encapsulating aluminium pump base for...
Lower handle effort reduces operator fatigue Fully serviceable High-strength beam and pump linkage for long life Pumping handle included on all m...
C Series High Flow Coupling A high quality, high-pressure coupling suitable for use with Enerpacs range of hydraul...
Popular Categories For Enerpac
Categories For Enerpac
Popular Items
Popular items
HC7206, Enerpac
High Pressure Hose
Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar.
4:1 design factor
Four layer design, including 2 high strength steel wire braids
Outside jacket is polyurethane, for maximum abrasion resistance
Crimped on rubber strain relief for improved life and durability
Note
Use hose
365-0125
with flat cylinder
283-0982
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
Popular items
A102G, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top be...
Popular items
RC106, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top be...
Popular items
V82, Enerpac
Needle Valve
For use with high pressure hydraulic equipment to control cylinder speed
Can also be used as a shut off valve for temporary load holding
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
Popular items
FZ1616, Enerpac
Elbow Adaptor
3/8in-18 NPT F-M elbow adaptor fitting
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
Popular items
RC251, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high...
Popular items
SCL201H, Enerpac
Hydraulic Single-Acting, Low-Height Cylinder-Pump Set
Enerpacs SCL range bring together a two speed hydraulic hand pump and low height lifting cylinder to provide you with a lifting kit ideal for use in tight spaces. The two speed hand pump requires 78% less effort operate than single speed versions and is fitted with a pressure relief valve to prevent overloading. Lightweight and low handle effort ensures ease of use a minimum operator fatigue.
The compact low profile cylinder is manufactured from a tough alloy steel and has a baked enamel finish for a long life in the harshest of working environments a strong return spring minimises the time to close and a plunger wiper ensures prevention against contamination.
Kit Contents
Low height, single acting cylinder
P-392 two speed hydraulic hand pump
HC-7206 1.8 m safety hose
GF-230B pressure gauge
GA-2 gauge adaptor
Note
The Black Plastic Carry Case is no longer available with this product.
Cylinder & Pump Sets
Popular items
SRS100PGH, Enerpac
Power Box Cylinder & Pumpsets
Enerpac power box sets give you a complete hydraulic solution in one package. Each pack contains a hydraulic cylinder, P-392 hand pump, 700 bar pressure gauge with adapter assembly and a 1.8m hydraulic hose all supplied in a tough plastic carry case to make transportation easy.
The two speed hand pump requires 78% less effort operate than single speed versions and is fitted with a pressure relief valve to prevent overloading. Lightweight and low handle effort ensures ease of use a minimum operator fatigue.
The Powerbox kit is available with a choice of cylinders including a wedge spread, general purpose, low height or flat-jac cylinder ensuring there is a Powerbox kit for a wide range of lifting, pulling, pushing and bending applications. All cylinder comly to ASME B30.1 and feature a baked enamel finish for improved corrosion resistance.
Cylinder & Pump Sets
Popular items
WR5, Enerpac
Hydraulic Wedge Cylinder
Single acting, spring return
For use when positioning and lifting heavy loads in confined working areas
Fitted with a female high flow coupler
Requires a high pressure pump and hose link, available separately
Popular items
P392, Enerpac
Lightweight Hand Pump
Durable glass-filled nylon reservoir and nylon encapsulating aluminium pump base for maximum corrosion resistance
To enable cylinder maintenance a replacement seal kit which fits both the single and two speed models is available
Lower handle effort to minimise operator fatigue
Handle lock and lightweight construction for easy carrying
Large oil capacities to power a wide range of cylinders or tools
Non-conductive fibre-glass handle for operator safety
Pumps- Hand Operated
Hand operated hydraulic pumps and pump sets with a maximum working pressure of 700 bar. The pumps hydraulic outlet port thread size is 3/8in x 18NPT.
Warning
High pressure hydraulic equipment can work at extremely high pressure and careful attention should be paid to working pressure when choosing accessories.
Popular items
GBJ010A, Enerpac
Lower handle effort reduces operator fatigue
Fully serviceable
High-strength beam and pump linkage for long life
Pumping handle included on all models
Safety relief valve to prevent overload
Automatic by-pass port to prevent over-extension
Wiper seal for extended life
Thick base material with large area for increased strength and stability during lifting
Popular items
CR400, Enerpac
C Series High Flow Coupling
A high quality, high-pressure coupling suitable for use with Enerpacs range of hydraulic cylinders, pumps, manifolds and hoses. To ensure safety, the couplings cannot be disconnected during operation and are suitable for use up to a maximum working pressure of 700 bar. Maximum oil flow 40 L/min.
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New Items
New items
HC7206, Enerpac
High Pressure Hose
Themo plastic hydraulic hoses for use in demanding environments and applications. The hoses come supplied with a male coupling ready assembled for direct connection to a pump or cylinder and have a maximum working pressure of 700 bar.
4:1 design factor
Four layer design, including 2 high strength steel wire braids
Outside jacket is polyurethane, for maximum abrasion resistance
Crimped on rubber strain relief for improved life and durability
Note
Use hose
365-0125
with flat cylinder
283-0982
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
A102G, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top be...
New items
RC251, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high...
New items
V82, Enerpac
Needle Valve
For use with high pressure hydraulic equipment to control cylinder speed
Can also be used as a shut off valve for temporary load holding
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
FZ1616, Enerpac
Elbow Adaptor
3/8in-18 NPT F-M elbow adaptor fitting
Hose Fittings & Accessories
Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.
Note
Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).
New items
SCL201H, Enerpac
Hydraulic Single-Acting, Low-Height Cylinder-Pump Set
Enerpacs SCL range bring together a two speed hydraulic hand pump and low height lifting cylinder to provide you with a lifting kit ideal for use in tight spaces. The two speed hand pump requires 78% less effort operate than single speed versions and is fitted with a pressure relief valve to prevent overloading. Lightweight and low handle effort ensures ease of use a minimum operator fatigue.
The compact low profile cylinder is manufactured from a tough alloy steel and has a baked enamel finish for a long life in the harshest of working environments a strong return spring minimises the time to close and a plunger wiper ensures prevention against contamination.
Kit Contents
Low height, single acting cylinder
P-392 two speed hydraulic hand pump
HC-7206 1.8 m safety hose
GF-230B pressure gauge
GA-2 gauge adaptor
Note
The Black Plastic Carry Case is no longer available with this product.
Cylinder & Pump Sets
New items
SRS100PGH, Enerpac
Power Box Cylinder & Pumpsets
Enerpac power box sets give you a complete hydraulic solution in one package. Each pack contains a hydraulic cylinder, P-392 hand pump, 700 bar pressure gauge with adapter assembly and a 1.8m hydraulic hose all supplied in a tough plastic carry case to make transportation easy.
The two speed hand pump requires 78% less effort operate than single speed versions and is fitted with a pressure relief valve to prevent overloading. Lightweight and low handle effort ensures ease of use a minimum operator fatigue.
The Powerbox kit is available with a choice of cylinders including a wedge spread, general purpose, low height or flat-jac cylinder ensuring there is a Powerbox kit for a wide range of lifting, pulling, pushing and bending applications. All cylinder comly to ASME B30.1 and feature a baked enamel finish for improved corrosion resistance.
Cylinder & Pump Sets
New items
WR5, Enerpac
Hydraulic Wedge Cylinder
Single acting, spring return
For use when positioning and lifting heavy loads in confined working areas
Fitted with a female high flow coupler
Requires a high pressure pump and hose link, available separately
New items
RC106, Enerpac
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.
Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example:
283-0954
for 10 t Enerpac units).
Dimensions (mm)
Ext Height
Out. Dia.
Piston Dia.
Thread Centres
Thread - Hole Size
Collar Thread
Collar Length
Stock no.
A
B
C
D
E
F
G
41
58***
**
28
5.6
25.4
-
283-0780
110
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0796
165
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0803
215
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0825
323
38
25
25
1/4 UNC
1 1/2 - 16
28
283-0831
121
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0847
171
57
35
39
5/16 UNC
2 1/4 - 14
26
283-0853
247
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0869
349
57
35
39
5/16 UNC
2 1/4 - 14
28
283-0875
Note
Cylinder RC50 (stock no.
283-0780
) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top be...
New items
GBJ010A, Enerpac
Lower handle effort reduces operator fatigue
Fully serviceable
High-strength beam and pump linkage for long life
Pumping handle included on all models
Safety relief valve to prevent overload
Automatic by-pass port to prevent over-extension
Wiper seal for extended life
Thick base material with large area for increased strength and stability during lifting
New items
P392, Enerpac
Lightweight Hand Pump
Durable glass-filled nylon reservoir and nylon encapsulating aluminium pump base for maximum corrosion resistance
To enable cylinder maintenance a replacement seal kit which fits both the single and two speed models is available
Lower handle effort to minimise operator fatigue
Handle lock and lightweight construction for easy carrying
Large oil capacities to power a wide range of cylinders or tools
Non-conductive fibre-glass handle for operator safety
Pumps- Hand Operated
Hand operated hydraulic pumps and pump sets with a maximum working pressure of 700 bar. The pumps hydraulic outlet port thread size is 3/8in x 18NPT.
Warning
High pressure hydraulic equipment can work at extremely high pressure and careful attention should be paid to working pressure when choosing accessories.
New items
RCS101, Enerpac
Low Height Lightweight, low profile spring return cylinders designed for use in confined spacesPiston wiper reduces contamination, extending cylinder lifeDimensions (mm)EXT HeightOut. Dia.Piston Dia.Thread - Hole SizeThread CentresStock no.ABCDE886928M426283-1020989225M539283-103611710125M539283-105812212725M539283-1064Note All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2KgLow Profile Cylinders Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.
Don’t hesitate to ask questions for better clarification.